TYROLIT Hydrostress WSE2226 Manual de usuario

Operating Instructions

Wall saw WSE2226

Index 000

Original operating instructions

10991485 en / 19.01.2012

Page 2

Wall saw WSE2226

TYROLIT Hydrostress AG

Witzbergstrasse 18

CH-8330 Pfäkon

Switzerland

Tel. 0041 (0) 44 952 18 18

Fax 0041 (0) 44 952 18 00

Congratulations!

With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment

which has been designed and built to leading technical standards. Only genuine TYROLIT Hy-

drostress replacement parts can guarantee quality and interchangeability. If maintenance work

is neglected or carried out inexpertly we will be unable to honour our warranty obligations. Any

repair work must be carried out by trained personnel only.

Our aftersales service is available to help ensure that your TYROLIT Hydrostress units remain in

perfect working order.

We hope that working with your TYROLIT unit will be a satisfying and fault-free experience.

TYROLIT Hydrostress

TYROLIT Hydrostress AG

Page 3

Wall saw WSE2226

Safety

These instructions are just one part of the documentation which is supplied together with the

wall saw. These instructions go together with the «Wall Saw Safety Manual / System Descrip-

tion» to form a complete set of documentation.

DANGER

Failure to comply with the safety instructions in the «Safety Manual / System Manual» may re-

sult in serious injury or even death.

XPlease ensure that the «Wall Saw Safety Manual / System Description» has been read and un-

derstood in full.

DANGER

Cuts from the saw blade

XAlways wear protective gloves when working on the wall saw, particularly when working on

the saw blade.

XAlways use the blade guard when operating the wall saw.

DANGER

Serious injury or material damage as a result of uncontrolled movements of the

wall saw

XNever connect or disconnect cables when the control unit is switched on.

TYROLIT Hydrostress AG

Page 4

Wall saw WSE2226

Description

Wall saw system

The design and function of the wall saw systems are described in the «Wall Saw Safety Manual /

System Description».

Wall saw

Components

1 Guide prism 11 Rotary gear speed knob

2 Chassis 12 Grip / lock grip

3 Lock unit 13 Saw blade drive motor

4 Quick-release ange 14 Water connection

5 Cable connection

travel / swivel feed motors

15 Geared swivel arm

6 Fine adjusting device 16 Blade guard holder

7Cover 17 Water - Bypass

8 Blade guard holder 18 Locking coupling handle

9 Water bypass line changeover handle 19 Drive motor grip

10 Saw blade xing central screw 20 Gearbox

2.1

2.2

TYROLIT Hydrostress AG

Page 5

Wall saw WSE2226

Assembly / Disassembly

Place the wall saw on the guide rail

3.1

TYROLIT Hydrostress AG

Page 6

Wall saw WSE2226

Guide prism ne adjustment

3.2

TYROLIT Hydrostress AG

Page 7

Wall saw WSE2226

Mounting the drive motor

3.3

TYROLIT Hydrostress AG

Page 8

Wall saw WSE2226

Mounting the saw blade

DANGER

Death or serious injury can be caused by escaping saw blades!

XOnly use original screws and bolts from TYROLIT Hydrostress AG.

DANGER

Serious injury can be caused by sudden start-up of the saw blade

XSwitch o the control unit before working on the saw blade.

XIsolate the control unit from the mains supply.

Preparations for assembly

XDuring initial installation, remove the ush cut anchoring screws on the quick-release ange.

Preassembling the saw blade unit

The direction of rotation of the saw blade must match the direction of rotation of the machine.

Correct alignment: Countersinking of the fastening holes against the blade cover.

Fixing for normal cuts with saw blades up to Ø 1000 mm

3.4

3.4.1

3.4.2

3.4.3

TYROLIT Hydrostress AG

Page 9

Wall saw WSE2226

Fixing for normal cuts with saw blades bigger than Ø 1000 mm

Fixing with ush cut

3.4.4

3.4.5

TYROLIT Hydrostress AG

Page 10

Wall saw WSE2226

Securing the saw blade unit

DANGER

Death or serious injury can be caused by escaping saw blades!

XCheck whether the sleeve and central screw are countersunk.

XTighten the central screw to a torque of 60 Nm.

3.5

Otros manuales para WSE2226

Tabla de contenidos

Otros manuales de Sierra de TYROLIT Hydrostress

TYROLIT Hydrostress

TYROLIT Hydrostress HBE 350 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSD930 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress TME1000P Guía

TYROLIT Hydrostress

TYROLIT Hydrostress TME700P Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HYCON HRS 5806 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress CSE350D Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WSE811P Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FZ-4S Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSD930 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSD 1049 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WSE1217 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSD1274E5 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226QC Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSD1274 Series Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress SK-SD Guía

TYROLIT Hydrostress

TYROLIT Hydrostress WCE18 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HRE410 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HBH534 series Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WSE811 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSG513 Guía

TYROLIT Hydrostress

TYROLIT Hydrostress HRH500 Series Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSG513P Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress TRE250 Manual de usuario

Manuales populares de Sierra de otras marcas

RIDGID

RIDGID BS1400 Manual de usuario

ATIKA

ATIKA BWS 400-2 Manual de usuario

RGC

RGC FS20 Manual de usuario

Makita

Makita M2300 Manual de usuario

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manual de usuario

IMET Spa

IMET Spa SIRIO 370 AF-E Manual de usuario

Optimum

Optimum OPTisaw CS 275 Manual de usuario

Makita

Makita BPB180 Manual de usuario

Stihl

Stihl MS 462 C-M Manual de usuario

AEG

AEG TS 250 K Manual de usuario

Meec tools

Meec tools 004665 Manual de usuario

Makita

Makita LS1018L Manual de usuario

Ryobi

Ryobi RCS1400 Manual de usuario

DeWalt

DeWalt DCS391 Manual de usuario

Sealey

Sealey SA72 Manual de usuario

skilsaw

skilsaw SPT88 Instrucciones de montaje

Urrea

Urrea SI810 Dimensiones y guía de instalación

EINHELL

EINHELL BKG 210/1 Manual de usuario