TYROLIT Hydrostress FSD 1049 Manual de usuario

10993834 EN / 28.11.2012

Operating Instructions

Floor Saw FSD1049









Index 001

Page 2 Floor Saw FSD1049

Congratulations!

You have decided to urchase a tried and tested TYROLIT-Hydrostress unit and have thus

acquired a highly so histicated and reliable state-of-the-art unit. The exclusive use of only

TYROLIT Hydrostress s are arts ensures quality and interchangeability. If maintenance work is

neglected or carried out inex ertly we will be unable to honour our warranty obligations. Any

re air work must be carried out by trained ersonnel only.

Should you need more details concerning your TYROLIT Hydrostress unit in order to kee it in

erfect condition, lease contact our after-sales service for further information.

We ho e that you enjoy untroubled and fault-free working with your TYROLIT unit.

TYROLIT Hydrostress

Co yright © TYROLIT Hydrostress

TYROLIT Hydrostress AG

Witzbergstrasse 18

CH-8330 Pfäffikon

Switzerland

Tel. 0041 (0) 44 952 18 18

Fax 0041 (0) 44 952 18 00

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 3

1Safety

These instructions are just one art of the documentation which is su lied together with the

floor saw. These instructions go together with the "Safety Manual / System Desc

ri tion for Floor

Saws" to form a com lete set of documentation.

DANGER

Failure to com ly with the safety instructions in the "Safety Manual / System Descri tion" may

result in serious injury or death.

►Please ensure that the "Safety Manual / System Descri tion for Floor saws" has been read

and understood in full.

TYROLIT Hydrostress AG

Page 4 Floor Saw FSD1049

2Design

Com onents

1 O erating console

2 Name late

3 Main motor

4 Front cut guide

5 Shaft cover

6 Blade guard

7 Saw blade

8 Rocker wheel

9 Drive wheel

10 Rear cut guide

11 Water feed

2.1 Saw blade drive

Saw blade drive (schematic)

1 Blade drive shaft

2 Drive belt

3 Main motor drive shaft

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 5

2.2 Lift drive

Lift drive (schematic)

1 Hydraulic cylinder

2. Travel drive

Travel drive (schematic)

1 Drive shaft (main motor)

2 Hydrostat drive belt

3 Hydrostatic motors

4 Wheel drive shaft

5 Drive chain

6 Drive wheel

TYROLIT Hydrostress AG

Page 6 Floor Saw FSD1049

Transport

DANGER

Inexpert transport may result in death or serious injury.

►Floor saws must only be trans orted with the main motor switched off.

►Only trans ort vehicles, lifting tools and load sus ension devices with sufficient load-

bearing ca acity must be used.

►Floor saws must only be hitched by the hitching oints rovided.

►A oint an ex ert marshaller.

►When trans orting by crane do not stand underneath sus ended load.

►Always have the floor saw in your line of vision while it is being trans orted.

.1 Hitching points

Hitching oints

1 Crane hitching device

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 7

4Initial start-up

4.1 Fitting battery

►Fit battery (for ty e see Technical Data).

TYROLIT Hydrostress AG

Page 8 Floor Saw FSD1049

5Assembly / Set-up

5.1 Mounting grip

►

5.2 Mounting saw blade

1. A ly hand brake

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 9

DANGER

Parts that fly off (segments, concrete splinters, saw blade, etc.) may cause serious injury

or even death.

►Floor saws must only be o erated with a blade guard.

►When assembling the saw blade on the right-hand side use the anchoring screw with the

left-hand thread.

When assembling the saw blade on the left-hand side, use the anchoring screw with the

right-hand thread.

►Note the direction or rotation arrows on the saw blade.

1 Anchoring screw

*Note the direction of rotation

TYROLIT Hydrostress AG

Page 10 Floor Saw FSD1049

C: To revent the saw blade rotating while being tightened, carefully lace the saw blade on the floor.

5. Mounting saw blade on the other side

5. .1 Disassemble the blade guard

►

Tabla de contenidos

Otros manuales de Sierra de TYROLIT Hydrostress

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSE1240 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress TBS510 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress SB-E Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WZ Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HYCON HRS 5806 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WSE811 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress CSE350D Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress DZ-S2 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HRH500 Series Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FZ-4S Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HBH534 series Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HRE400 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress TME1000P Guía

TYROLIT Hydrostress

TYROLIT Hydrostress TBE350 Series Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WCE18 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress TBE400 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HBE 400 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress HBE 350 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSG513P Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress WZ Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSD1274E5 Manual de usuario

TYROLIT Hydrostress

TYROLIT Hydrostress FSD930 Manual de usuario

Manuales populares de Sierra de otras marcas

RIDGID

RIDGID BS1400 Manual de usuario

ATIKA

ATIKA BWS 400-2 Manual de usuario

RGC

RGC FS20 Manual de usuario

Makita

Makita M2300 Manual de usuario

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manual de usuario

IMET Spa

IMET Spa SIRIO 370 AF-E Manual de usuario

Optimum

Optimum OPTisaw CS 275 Manual de usuario

Makita

Makita BPB180 Manual de usuario

Stihl

Stihl MS 462 C-M Manual de usuario

AEG

AEG TS 250 K Manual de usuario

Meec tools

Meec tools 004665 Manual de usuario

Makita

Makita LS1018L Manual de usuario

Ryobi

Ryobi RCS1400 Manual de usuario

DeWalt

DeWalt DCS391 Manual de usuario

Sealey

Sealey SA72 Manual de usuario

skilsaw

skilsaw SPT88 Instrucciones de montaje

Urrea

Urrea SI810 Dimensiones y guía de instalación

EINHELL

EINHELL BKG 210/1 Manual de usuario