2 TruVision TVK-600 Quick Start Guide
•Ensure that the unit is in a well-ventilated
area.
•Do not expose the unit to rain or moisture.
Getting started
Use the web browser to access and configure
the keypad over the network.
Checking your web browser security level
When using the web browser interface, you
can install ActiveX controls to connect and
view video using Internet Explorer (the keypad
is not compatible with Microsoft Edge).
However, you may not be able to download
data, such as video and images, due to the
browser’s security settings. Consequently,you
should check the security level of your
browser so that you are able to interact with
the cameras over the web and, if necessary,
modify the Active X settings.
Configuring IE ActiveX controls
You should confirm the ActiveX settings of
your web browser.
To change the web browser’s security
level:
1. In Internet Explorer (IE) click Internet
Options on the Tools menu.
2. On the Security tab, click the zone to which
you want to assign a web site under
“Select a zone to view or change security
settings”.
3. Click Custom Level.
4. Change the ActiveX controls and plug-
ins options that are signed or marked as
safe to Enable. Change the ActiveX
controls and plug-ins options that are
unsigned to Prompt or Disable. Click OK.
- or -
Under Reset Custom Settings, click the
security level for the whole zone in the
Reset To box, and select Medium. Click
Reset.
Then click OK to open the Internet Options
Security tab window.
5. Click Apply.
Windows users
Internet Explorer operating systems have
increased security measures to protect your
PC from any malicious software being
installed.
To have complete functionality of the web
browser interface with Windows 7, 8 and 10,
do the following:
• Run the browser interface as an
administrator in your workstation
• Add the keypad’s IP address to your
browser’s list of trusted sites
To add the keypad’s IP address to Internet
Explorer’s list of trusted sites:
1. Open Internet Explorer.
2. Click Tools, and then Internet Options.
3. Click the Security tab, and then select the
Trusted sites icon.
4. Click the Sites button.
5. Clear the “Require server verification
(https:) for all sites in this zone box.
6. Enter the IP address in the “Add this
website to the zone” field.
7. Click Add, and then click Close.
8. Click OK in the Internet Options dialog
window.
9. Connect to the keypad for full browser
functionality.
Activate the admin password
When you first start up the unit, the Activation
window appears. You must define a high-
security admin password before you can
access the unit. There is no default password
provided.
A message will appear on-screen when the
unit has been activated.
Tips on creating a strong password:
A valid password range must have up to
eight characters. You can use a
combination of numbers, lower and upper
case letters, and special characters: _ - , *
& @ / $? Space. The password must
