Tripp Lite U223-007-IND Manual de usuario
1
Owner’s Manual
Industrial USB 2.0 Hub
Models:
U223-004-IND (4-Port), U223-007-IND (7-Port)
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
Safety Instructions 2
Features 3
System Requirements 3
Package Contents 3
Powering the Hub 4
Mounting Kit Installation 5
Specifications 7
Warranty & Product Registration 8
Regulatory Compliance 9
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
18-01-326 RevC Updated.indd 1 11/20/2018 4:29:12 PM
2
Before attempting to connect, operate or adjust this product, please
read the entire Owner’s Manual first.
Safety Instructions
• Always read the safety instructions carefully
• Keep this Owner’s Manual for future reference
• If any of the following situations arise, schedule an appointment to
have your equipment inspected by a service technician:
º The equipment has been exposed to moisture
º The equipment has been dropped and damaged
º The equipment shows obvious signs of breakage
º The equipment is not functioning properly or is not functioning
according to the Owner’s Manual instructions
18-01-326 RevC Updated.indd 2 11/20/2018 4:29:12 PM
3
Features
• Increases the number of High Speed USB ports via a single
computer port (4 ports for U223-004-IND model / 7 ports for
U223-007-IND model)
• USB 2.0 compliant with data transfer rates up to 480Mbps
• Backwards compatible with USB 1.1
• Rugged all-metal enclosure designed for use in industrial
applications
• Wall-mount and DIN rail hardware included for secure installation
• Three power connection options (source USB port, external power
supply (not included) or 3-wire terminal block)
• Over-current detection and protection
• ESD protection to +/- 15 kV
• Automatic link and speed detection
• Plug-and-play; no software or drivers required
System Requirements
• Compatible with all USB-enabled operating systems
Package Contents
• U223-004-IND or U223-007-IND Industrial USB 2.0 Hub
• USB 2.0 cable
• 3-pin power terminal block
• DIN mounting hardware
• Wall-mount hardware
• Owner’s Manual
18-01-326 RevC Updated.indd 3 11/20/2018 4:29:12 PM
4
Powering the Hub
To power the hub, plug the user-supplied power adapter into the wall
outlet.
Note:
The U223-004-IND is compatible with external power supply units with a
5V 2.5A DC output. The U223-007-IND is compatible with external power supply
units with a 5V 3A DC output. In order to connect an external power supply with
the U223-004-IND or U223-007-IND’s input port, the external power supply
unit must have a 5.5 x 2.1 x 9.5 mm output plug with a positive tip and negative
sleeve.
DC-In
Power Terminal
To power the hub using a power terminal, plug the supplied power
terminal block into the hub according to the connector’s orientation.
18-01-326 RevC Updated.indd 4 11/20/2018 4:29:12 PM
5
Mounting Kit Installation
Mounting Hardware Installation
The U223-004-IND and U223-007-IND hubs can be placed on a
flat surface, or mounted using the included wall-mount brackets or
DIN rail hardware. Reference the diagrams below when installing the
mounting hardware.
Wall-Mount Hardware Installation
DIN mounting
Screw x3
DIN Rail Hardware Installation
18-01-326 RevC Updated.indd 5 11/20/2018 4:29:13 PM
6
Mounting Kit Installation
Note: The U223-007-IND and U223-004-IND’s dimensions are the same; the only
difference between the two models is the number of USB ports.
18-01-326 RevC Updated.indd 6 11/20/2018 4:29:13 PM
7
Specifications
Item Description
Ports
4 x USB 2.0 (U223-004-IND model)
7 x USB 2.0 (U223-007-IND model)
ESD Protection 15KV ESD
Transmission Speed 12M~480Mbps
Power Requirement Bus-power or External Power Supply:
(5V 2.5A DC for U223-004-IND), (5V 3A DC for
U223-007-IND)
3-Pin Terminal: (9~36V DC)
Operating Temperature 32°F to 140°F / 0°C to 60°C
Operating Humidity 5 to 95% RH
Dimension (LxWxH) 5.6 x 2.5 x 1 in. / 142 x 63.6 x 24.6 mm
Enclosure Material Metal
Regulatory Approvals
FCC/CE
18-01-326 RevC Updated.indd 7 11/20/2018 4:29:13 PM
8
Warranty & Product Registration
2-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for
a period of two (2) years from the date of initial purchase. TRIPP LITE’s obligation under
this warranty is limited to repairing or replacing (at its sole option) any such defective
products. To obtain service under this warranty, you must obtain a Returned Material
Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with
transportation charges prepaid and must be accompanied by a brief description of the
problem encountered and proof of date and place of purchase. This warranty does not
apply to equipment, which has been damaged by accident, negligence or misapplication
or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the
aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of
equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes,
claims by third parties, or otherwise.
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for
details.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to
change without notice.
18-01-326 RevC Updated.indd 8 11/20/2018 4:29:13 PM
9
Regulatory Compliance
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite
could void the user’s authority to operate this equipment.
18-01-326 RevC Updated.indd 9 11/20/2018 4:29:13 PM
10
Regulatory Compliance
WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies
depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended
Tripp Lite has a policy of continuous improvement. Product specifications are subject to
change without notice.
18-01-326 RevC Updated.indd 10 11/20/2018 4:29:14 PM
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de Tripp Lite
Tripp Lite
Tripp Lite NetDirector B024-HU08 Manual de usuario
Tripp Lite
Tripp Lite B005-HUA2-K Manual de usuario
Tripp Lite
Tripp Lite B064-016 Manual de usuario
Tripp Lite
Tripp Lite B119-003-UHD Manual de usuario
Tripp Lite
Tripp Lite NetCommander B070-016-19 Manual de usuario
Tripp Lite
Tripp Lite NetCommander B070-016-19TAA Manual de usuario
Tripp Lite
Tripp Lite U460-003-3AGALC Manual de usuario
Tripp Lite
Tripp Lite NetCommander B070-008-19 Manual de usuario
Tripp Lite
Tripp Lite Minicom Smart 108 IP Manual de usuario
Tripp Lite
Tripp Lite SmartRack SRSWITCH Manual de usuario
Tripp Lite
Tripp Lite U460-002-2AM-C Manual de usuario
Tripp Lite
Tripp Lite B004-VPA2-K-R Manual de usuario
Tripp Lite
Tripp Lite B004-VPA2-K-R Guía de configuración
Tripp Lite
Tripp Lite U460-004-2A2C Manual de usuario
Tripp Lite
Tripp Lite NetDirector B064-016-02-IPG Manual de usuario
Tripp Lite
Tripp Lite C205-004-U-R Manual de usuario
Tripp Lite
Tripp Lite B156-002-HDMI Manual de usuario
Tripp Lite
Tripp Lite U223-004-IND Manual de usuario
Tripp Lite
Tripp Lite NerDirector B020-U08-19KTAA Manual de usuario
Tripp Lite
Tripp Lite PDUMV20NET Manual de usuario
