Tripp Lite NFI-U05 Manual de usuario

5-Port Unmanaged Industrial Fast 10/100

Ethernet Switch, Plug and Play, Ruggedized,

DIN and Wall Mountable

Model: NFI-U05

8-Port Unmanaged Industrial Fast 10/100

Ethernet Switch, Plug and Play, Ruggedized,

DIN and Wall Mountable

Model: NFI-U08-1

8-Port Unmanaged Industrial Fast 10/100

Ethernet Switch, Plug and Play, Ruggedized,

DIN Mountable

Model: NFI-U08-2

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Este manual está disponible en español en la página de Tripp Lite: tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar:

tripplite.com

Owner’s Manual

Русскоязычная версия настоящего руководства представлена на веб-сайте

компании Tripp Lite по адресу: tripplite.com

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

• NFI-U05 or NFI-U08-1 or NFI-U08-2 10/100 Ethernet Switch

• DIN Rail-Mounting Clip (Preinstalled)

• Wall-Mount Mask (Preinstalled on NFI-U08-1 Only)

• Owner’s Manual

• 5 or 8 auto-negotiable 10/100 Mbps RJ45 ports

• Supports 10/100Base-T, Full Duplex and auto MDI/MDI-X crossover

function

• Simple plug-and-play installation and operation with no conﬁguration

required

• Rugged high-strength case

• Industrial temperature switch models support operating temperature

range of -40°F to 167°F (-40°C to 75°C)

• Easy-to-read LEDs indicate connection and activity status for each port

• Meets the following IEEE standards:

o IEEE 802.3 10Base-T

o IEEE 802.3u 100Base-T

o IEEE 802.3 Auto Negotiation

o IEEE 802.3x Flow Control

• Supports MAC address auto-learning and auto-aging

• Preinstalled durable rail clip mounts ﬁrmly to any standard 35 mm DIN

rail*

*Note: Only NFI-U05 and NFI-U08-1 are both DIN and wall mountable

Package Contents

Product Features

• N001-Series Cat5e 350 MHz Snagless UTP Cables

• N002-Series Cat5e 350 MHz UTP Ethernet Cables

• N200-Series Cat6 Gigabit Molded UTP Ethernet Cables

• N201-Series Cat6 Gigabit Snagless Molded UTP Ethernet Cables

Optional Accessories

Product Overview

NFI-U05

5-Port Unmanaged Industrial Fast 10/100 Ethernet Switch, Plug and Play,

Ruggedized, DIN and Wall Mountable

Top View Front View Side View

100 Mbps

LNK/ACT

Grounding

Screw

Power

Product Overview

NFI-U08-1

8-Port Unmanaged Industrial Fast 10/100 Ethernet Switch, Plug and Play,

Ruggedized, DIN and Wall Mountable

Front View

LNK/ACT

(Green)

LNK/ACT

(Green)

+18~30V DC

100 Mbps

(Green)

100 Mbps

(Green)

Grounding

Screw

Power

(Green)

Product Overview

NFI-U08-2

8-Port Unmanaged Industrial Fast 10/100 Ethernet Switch, Plug and Play,

Ruggedized, DIN Mountable

DIN Rail

Grounding

Screw

Power Input

Terminal Block

Top View

Front View

100 Mbps

LNK/ACT

Grounding Screw

PWR

DIN-Rail Mounting and Dismounting Instructions

Mounting the Switch Removing the Switch

Click

Push Push

Click

ATTENTION: The NFI-Series switches are open-type devices

and shall be DIN mounted or wall mounted (NFI-U05 and

NFI-U08-1 only) in a rack enclosure. The ambient temperature

should not exceed 75°C (167°F).

Mounting the Switch

Place the switch on the DIN rail from above using the built-in slot. Push the

front of the switch toward the mounting surface until it snaps into place.

You will hear a “click” to indicate it has successfully snapped into place.

Dismounting the Switch

Press the switch from the top, then pull out the lower edge of the switch to

remove it from the DIN rail.

DIN-Rail Mounting and Dismounting Instructions

ATTENTION: A corrosion-free DIN mounting rail is advisable.

When mounting the switch, be sure to allow enough space

between devices to install the cabling and to ensure proper

airﬂow.

Wall-Mounting Installation for NFI-U05 and

NFI-U08-1 Only

Wall-Mounted Mask (NFI-U05 Only)

1. Mount the switch by using mounting holes on the wall at the appropriate

places.

2. The switch can be wall mounted either vertically or horizontally.

Mounting holes for

NFI-U05

Mounting Holes for Drawing of NFI-U05 Screw Installation Distance

Horizontal Direction InstallationStraight Direction Installation

50 mm

1.5 mm - 3 mm

50 mm

Mounting direction

with screw

Mounting direction

with screw

DIN-Rail Mounting and Dismounting Instructions

Wall-Mounted Mask (NFI-U08-1 Only)

1. Remove the DIN rail kit before wall mounting.

2. Mount the switch by using mounting holes on the wall at the appropriate

places.

3. The switch can be wall mounted either vertically or horizontally.

Grounding the Switch

Grounding and wire routing help limit the effects of line noise caused by

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface, then connect the ground connection

from the terminal block to the grounding surface prior to connecting

devices.

ATTENTION: This switch is intended for mounting on a well-grounded

surface, such as a metal panel.

Mounting bracket for

NFI-U08-1

Wiring Requirements

WARNING: Safety measures should be taken before connecting

the power cable. Turn off the power before connecting modules

or wires. The correct power supply voltage is listed on the product

label. Check the voltage of your power source to make sure you

are using the correct voltage. DO NOT use a voltage greater than

what is speciﬁed on the product label.

• Use minimum 24AWG power cable wire when connecting.

• Use a Power Supply that provides a Limited Power Source.

These power supply are generally marked LPS.

• Be sure to observe the polarity when connecting. Not following

polarity can damage your unit and void your warranty.

Please read and follow these guidelines:

• Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

Note: Do not run signal or communications wiring and power wiring through the

same wire conduit. To avoid interference, wires with different signal characteristics

should be routed separately.

• You can use the type of signal transmitted through a wire to determine

which wires should be kept separate. Wiring that shares similar electrical

characteristics can be bundled together.

• You should separate input wiring from output wiring.

• Be advised that you should label the wiring to all devices in the system.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Tripp Lite

Tripp Lite

Tripp Lite U230-204-R Manual de usuario

Tripp Lite

Tripp Lite B020-008-17 Manual de usuario

Tripp Lite

Tripp Lite U460-4A3C-IND Manual de usuario

Tripp Lite

Tripp Lite N050-P12 Manual de usuario

Tripp Lite

Tripp Lite U225-004-R Manual de usuario

Tripp Lite

Tripp Lite Thunderbolt 4 Manual de usuario

Tripp Lite

Tripp Lite B004-DUA4-K-R Manual de usuario

Tripp Lite

Tripp Lite B004-DUA2-K-R Manual de usuario

Tripp Lite

Tripp Lite B006-VU4-1 Manual de usuario

Tripp Lite

Tripp Lite B004-2DUA2-K Manual de usuario

Tripp Lite

Tripp Lite WEXT5-B072-016 Manual de usuario

Tripp Lite

Tripp Lite NetDirector B030-DP08-17D Manual de usuario

Tripp Lite

Tripp Lite B004-008 Manual de usuario

Tripp Lite

Tripp Lite NSU-G24 Manual de usuario

Tripp Lite

Tripp Lite NetCommander B070-016-19 Manual de usuario

Tripp Lite

Tripp Lite NetCommander B070-016-19-IP2 Manual de usuario

Tripp Lite

Tripp Lite U215-002 Manual de usuario

Tripp Lite

Tripp Lite NetController B040-008-19 Manual de usuario

Tripp Lite

Tripp Lite PDUMH20ATNET Manual de usuario

Tripp Lite

Tripp Lite U224-4R4-R Manual de usuario

Tripp Lite

Tripp Lite B022-002-KT-R Manual de usuario

Tripp Lite

Tripp Lite B064-008-01-IPG Manual de usuario

Tripp Lite

Tripp Lite NetDirector B064-032-04-IPG Guía de configuración

Tripp Lite

Tripp Lite U460-ST4-4A-C Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario