Tripp Lite B302-4HX4H-4K Manual de usuario

Owner’s Manual

HDMI Matrix Switch/Splitters

with Audio Extractor,

IP Access and Multi-

Resolution Support

Model: B302-4HX4H-4K, B302-8HX8H-4K

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Este manual esta disponible en español en la página de Tripp Lite: tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com

Русскоязычная версия настоящего руководства представлена на веб-сайте компании

Tripp Lite по адресу: tripplite.com

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

• B302-4HX4H-4K or B302-8HX8H-4K HDMI Matrix Switch/Splitter

• IR Remote Control

• IR Receiver Cable, 4 ft.

• International Power Supply (Input: 100–240V)

• (x4) International Plug Adapters (North America, U.K., Europe, Australia)

• Mounting Hardware

• Driver CD

• Owner’s Manual

Package Contents

• P569-XXX-CERT High-Speed HDMI 2.0 Cables

• P312-Series 3.5 mm Audio Cables

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

Optional Accessories

• Shares true 4K video from 4 different HDMI sources among 4 separate displays (B302-4HX4H-4K) or 8 different

HDMI sources among 8 separate displays (B302-8HX8H-4K)

• Displays any audio/video signal on any display or the same signal on all displays

• Supports true 4K resolutions up to 4096 x 2160 @ 60 Hz

• Transmits analog stereo audio

• Switches between sources and displays via front-panel pushbuttons, IR remote control, RS-232 serial commands or

control software

• Multi-resolution support allows mixing and matching of monitors of various resolutions

• HDR (High Dynamic Range) offers richer contrast and expanded color accuracy

• Audio extraction allows connection of speakers, ampliﬁers or sound bars

• Remotely access the software GUI by conﬁguring your network to match the pre-assigned IP address

Product Features

The following panels depict the 8x8 HDMI Matrix Switch/Splitter. It is identical to the 4x4 model, except with 4 more input and

output ports.

Panel Descriptions

1HDMI Inputs – Connect up to 8 HDMI source devices.

2HDMI Outputs – Connect up to 8 HDMI display devices.

3DC 12V – Connect the included 12V DC power supply.

4RS-232 Port – Connect a PC or laptop to send RS-232 serial commands to the unit via terminal.

5TCP/IP Port – Connect a PC or laptop via Cat6 cable to remotely control the unit via GUI.

6IR EXT – Connect the included IR Receiver Cable for IR signal reception from the included IR Remote Control.

7Audio Outputs – Connect up to 8 sets of speakers or ampliﬁers.

8Power – Switch to turn the unit on and off.

1 2 3

4 5 6 7 8

9LCD Screen – Displays the unit’s information and settings.

10 In/Out Select – Let you mix and match any input to any output. Press “ALL” to send one input to all connected displays.

11 EDID Select – Let you set EDID information for the Input and Output ports.

12 Lock – Locks all front-panel buttons to prevent accidental changes. Press “LOCK” again to unlock buttons.

13 Enter – Press to conﬁrm commands.

14 IR – IR signal receptor for the included remote control.

9 10 11 13 14

Refer to the following steps and diagram to set up your HDMI matrix switch installation.

Note: Before making any connections, make sure power to all devices connected to the switch is turned off.

Installation

1Connect up to 8 (B302-8HX8H-4K) or 4 (B302-4HX4H-4K) HDMI sources to the switch with user-supplied cables.

2Connect up to 8 (B302-8HX8H-4K) or 4 (B302-4HX4H-4K) HDMI displays to the switch with user-supplied cables.

3(Optional) Connect up to 8 (B302-8HX8H-4K) or 4 (B302-4HX4H-4K) speakers or ampliﬁers to the switch with user-

supplied 3.5 mm audio cables.

4(Optional) Connect a PC or laptop to the RS-232 port to control the switch via RS-232 commands.

5(Optional) Connect a PC or laptop to the TCP/IP port with a user-supplied Cat6 cable to control the switch via the GUI.

6(Optional) Connect the included IR Receiver Cable to the IR EXT port.

7Connect the included power supply to the 12V DC port and turn on the power using the power switch. Within 20–30

seconds, each input signal will be displayed with its corresponding output port.

12V Power Adapter

HDMI Display 1

4K/60Hz

HDMI Display 8

4K/60Hz

Ampliﬁer 1 Ampliﬁer 8

IR Extender

RS-232 and RJ45

Equipped PC

HDMI Source 1 HDMI Source 8

........... .......... ..................

1 234 5 6 7

The following instructions are for the 8x8 HDMI Matrix Switch/Splitter, but apply equally to the 4x4 model.

The B302-Series HDMI Matrix Switch/Splitter features three different methods of control:

1) Front-panel pushbuttons

2) IR remote control

3) TCP/IP or RS-232 control via PC or laptop

Front-Panel Pushbuttons

The following section describes how to change the inputs and outputs manually.

1) To change an input to a speciﬁc output, press the desired input (IN 1–8), then the desired output (OUT 1–8). Press

“ENTER” to conﬁrm the new settings.

2) If you wish to send one input to more than one output display, press the desired input (IN 1-8), then the desired outputs

(OUT 1–8). Once you have selected all the desired outputs, press “ENTER” to conﬁrm the setting changes. To select all

the outputs at once, press “ALL.”

3) To preset the output EDID settings of one or all inputs, press the desired input (IN 1–8), then “EDID MENU.” The LCD

screen will display the input source settings as shown below. Press “UP/DOWN” to select a preset EDID. Please see EDID

Table for a list of all the preset resolutions. Hit “ENTER” to conﬁrm the setting.

4) To enter the output mode selection menu, press “UP.” In the menu, users can choose between Default and Smart mode.

a) Default: All displays are defaulted to output 4K x 2K @ 60 Hz or the user-deﬁned EDID setting.

b) Smart: Outputs the lowest capable resolution of the connected displays.

To switch the mode, press “DOWN.” By default, the unit comes preset in Default mode.

Operation

IR Remote Control

The following section describes how to operate the remote. “N” indicates a number value (1–8).

“+” indicates continuous pressing. There is no “+” button.

1) The format of switching channels (inputs to outputs) with the remote control is as follows:

Input (N) + Switch + Output (N), Input (N) + Switch + Output (N), …. + Enter.

For example: If you wish to send Input 1 to Output 2 and Input 2 to Output 4,

the sequence will be: Input (1) + Switch + Output (2) + Input (2) + Switch

+ Output (4) + Enter.

2) To select multiple outputs for one input, an example would be:

Input (1) + Switch + Output (2) + Output (5) + Output (8) + Enter.

3) “ALL” is the shortcut button to select all output channels (displays).

It works in the following fashion: ALL + Input (N) + Enter.

TCP/IP GUI Control

The GUI Control software is available on the included CD and at tripplite.com. GUI software is not compatible with macOS®.

1) Run the dedicated GUI software on the target computer to be used.

2) Set the correct COM port number and the following communication parameters: 9600 bps, 1 start bit, 1 end bit, no

check bit. Set the data format as ASCII and open the serial port.

3) The Matrix Control System has four different tabs. Each one will be explained in the following steps.

Operation

Switch Interface: Scene entering and conﬁguring.

Select the inputs and outputs through the IN/OUT area. The selections will be displayed in the table below.

• ALL: Shortcut button to select all outputs.

• Clear: Clear the contents of the table.

• Save: Save the current scene of the table.

• Enter: Enter the current scene.

Operation

Scene Interface: Scene selection, current scene and recall.

The table on the left side of the interface displays the current scene or the scene that is recalled.

• Scene1-12: User-saved scenes.

• Current: Obtain the current scene of the device.

• Save: Save the current obtained scene of the device.

• Recall: Recall the last scene selected.

Operation

EDID Interface: EDID management.

Set the output resolution of each input as well as the mode.

• Source: IN1-8 or IN1-4.

• Resolution: See EDID Table for a full list of available options to choose from.

• Mode: Set the output mode to either Default or Smart.

Setting Interface: RS-232 and TCP/IP Settings.

The default communication mode is the RJ45 Ethernet port. Users can conﬁgure the communication mode through the RS-

232 and Net Setting boxes. Click “OK” in the corresponding box to set the desired communication mode, then click “Connect”

to connect. The status bar should change, as shown below.

RS-232 Setting

To control the switch using RS-232 commands, ensure the following communication parameters are set: 9600 bps, 1 start

bit, 1 end bit, no check bit. Set the data format as ASCII and open the serial port.

Net Setting

The B302-4HX4H-4K and B302-8HX8H-4K come with a pre-assigned static IP address. They can be accessed remotely by

conﬁguring your network to match the pre-assigned IP address style. Simply connect a user-supplied RJ45 cable between the

matrix switch and your target computer, and then conﬁgure your network settings (IPv4) accordingly.

Note: The pre-assigned IP address will never change even if you disconnect and reconnect the target computer.

Operation

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Tripp Lite

Tripp Lite

Tripp Lite B020-008-17 Manual de usuario

Tripp Lite

Tripp Lite B127A-4X2-BH2PH Manual de usuario

Tripp Lite

Tripp Lite B070-016-19-IP Manual de usuario

Tripp Lite

Tripp Lite B002-DP1AC2-N4 Manual de usuario

Tripp Lite

Tripp Lite U460-002-2AM-C1 Manual de usuario

Tripp Lite

Tripp Lite U460-4A3C-IND Manual de usuario

Tripp Lite

Tripp Lite WEXT5-B060-032 Manual de usuario

Tripp Lite

Tripp Lite B004-DUA2-K-R Manual de usuario

Tripp Lite

Tripp Lite B321-4X1-HDVC Manual de usuario

Tripp Lite

Tripp Lite B032-HUA2 Manual de usuario

Tripp Lite

Tripp Lite NetDirector B030-DP08-17D Manual de usuario

Tripp Lite

Tripp Lite B004-DUA2-K-R Manual de usuario

Tripp Lite

Tripp Lite B006-VU4-R Manual de usuario

Tripp Lite

Tripp Lite B320-4X1-HH-K1 Manual de usuario

Tripp Lite

Tripp Lite U215-004-R Manual de usuario

Tripp Lite

Tripp Lite B160-002-R Manual de usuario

Tripp Lite

Tripp Lite B070-016-19-IP Manual de usuario

Tripp Lite

Tripp Lite B022-002-KT-R Manual de usuario

Tripp Lite

Tripp Lite NSS-G16D2 Manual de usuario

Tripp Lite

Tripp Lite U460-003-3AGB-C Manual de usuario

Tripp Lite

Tripp Lite AG-01FD Series Manual de usuario

Tripp Lite

Tripp Lite B072-008-1A Manual de usuario

Tripp Lite

Tripp Lite Ultra-Mini U202-004-R Manual de usuario

Tripp Lite

Tripp Lite 932845 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario