Tripp Lite B127F-1A1-MM-DD Manual de usuario
1
Owner's Manual
4K/30 DisplayPort over
Fiber Extender Kit
Models: B127F-1A1-MM-DD (Multimode),
B127F-1A1-SM-DD (Singlemode)
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
www.tripplite.com/warranty
Español 11 • Français 21 • Русский 31
19-06-088-933976.indb 1 8/9/2019 9:48:10 AM
2
Package Contents
Product Features
• DisplayPort over Duplex LC Fiber Extender Kits extend a 4K (3840x2160)
@ 30 Hz signal:
B127F-1A1-MM-DD – Up to 1000 ft. (305 m) from the source
B127F-1A1-SM-DD – Up to 6.2 mi. (10 km) from the source
• Supports 4K (3840x2160) @ 30 Hz 4:4:4 maximum video resolution
• Supports 8-channel LPCM, AC-3 and DTS digital audio
• DisplayPort 1.2a compatible
• Plug and play—no software or drivers required
• Additional DisplayPort on the transmitter unit allows connection of a
local display, enabling users to monitor the remote display’s content
• Remote receiver unit features built-in equalization (EQ) control and
auto-EDID image adjustment
B127F-1A1-MM-DD
(DisplayPort over Duplex LC Multimode Fiber Extender Kit)
• Transmitter Unit
• Receiver Unit
• Mounting Hardware
• External Power Supply (x2)
B127F-1A1-SM-DD
(DisplayPort over Duplex LC Singlemode Fiber Extender Kit)
• Transmitter Unit
• Receiver Unit
• Mounting Hardware
• External Power Supply (x2)
19-06-088-933976.indb 2 8/9/2019 9:48:10 AM
3
Product Features
Optional Accessories
• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cable
• P580-XXX DisplayPort Cable
• N820-Series 10 Gb Duplex Multimode LC-to-LC Fiber Patch Cable
• N370-XXM Duplex Singlemode LC-to-LC Fiber Patch Cable
• Transmitter and receiver units feature built-in:
B127F-1A1-MM-DD – 10G Multimode LC, 850nm, 300M,
DDM transceivers
B127F-1A1-SM-DD – 10G Singlemode LC, 1310nm, 10KM,
DDM transceivers
• Local port at transmitter with built-in multi-resolution technology
connects any display without affecting 4K/30 Hz signal transmission
• Includes mounting hardware that allows both the local transmitter
and remote receiver units to be wall-mounted, rack-mounted or pole-
mounted
19-06-088-933976.indb 3 8/9/2019 9:48:10 AM
4
Both extender kit models include mounting hardware that allows for a
variety of mounting methods. The following images illustrate how the
included mounting brackets can be attached for different installations.
Note: The model shown in the below images is for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting options
for all over IP units are the same.
19” Rack-mount Pole-mount
Wall-mount
Mounting Instructions
19-06-088-933976.indb 4 8/9/2019 9:48:10 AM
5
Notes:
1) Test to ensure the entire installation works properly before pulling cables
through ceilings/walls.
2) To achieve maximum distance and performance, use 10 Gb duplex multimode
fiber cabling, such as Tripp Lite’s N820-Series 10 Gb Duplex Multimode LC-to-LC
Fiber Cable. Preinstalled 10 Gb transceivers are intended to work with 10 Gb fiber
cables. Using lower-rated fiber cables can result in signal loss or no image.
Standard Extender Kit Installation
Before installation, check the following settings of your
source(s) and TV/monitor(s):
1. Set the display to 30 Hz. Double-check the factory settings, as the
default can be set to a lower frequency (Hz) than advertised.
2. Verify your monitor has the HDR feature enabled. Some displays may
have this feature disabled as a factory setting.
3. Check if the Ultra HD (UHD) Deep Color setting is enabled on your
TV/monitor. Confirm with your TV/monitor manufacturer which HDMI
ports support UHD Deep Color.
19-06-088-933976.indb 5 8/9/2019 9:48:10 AM
6
Standard Extender Kit Installation
1B127-1A1-MM-DD: Up to 1000 ft. (300 m)
multimode fiber cable
B127-1A1-SM-DD: Up to 2.6 mi. (10 km)
singlemode fiber cable
2Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/30 Hz
3Up to 15 ft. (4.5 m) DisplayPort cable at 4K/30 Hz
PC with USB
(Keyboard + Mouse)
Control
IR
Sensor
USB
Keyboard
USB
Mouse
RS-232
Scanner/optional
IR
Sensor
Source
Remote
PC
LOCAL
Source
Remote
REMOTE
RECEIVER
LOCAL
TRANSMITTER
B127F-1A1-XX-DD
Extender Kits
19-06-088-933976.indb 6 8/9/2019 9:48:10 AM
7
1Make sure all equipment in the installation is powered OFF.
2Using a DisplayPort cable (such as Tripp Lite P580-XXX DisplayPort
cables), connect the DisplayPort source to the INPUT port on the local
transmitter unit.
3(Optional) Using an HDMI 2.0 cable (such as Tripp Lite
P569-XXX-CERT or P568-XXX-2A Series cables), connect a local monitor
to the LOCAL port on the local transmitter unit. The LOCAL (orange) LED
will illuminate to indicate the port is connected to a display.
4B127F-1A1-MM-DD – Using duplex LC multimode (850 nm) fiber cable
(such as Tripp Lite N820-Series cable), connect the LC fiber port on the
local transmitter unit to the LC fiber port on the remote receiver unit.
B127F-1A1-SM-DD – Using duplex LC singlemode (1310 nm) fiber
cable (such as Tripp Lite N370-XXM Series cable), connect the LC
fiber port on the local transmitter unit to the LC fiber port on the
remote receiver unit.
5Using a DisplayPort cable (such as Tripp Lite P580-XXX Series cables),
connect the remote receiver unit’s DisplayPort to a monitor.
6Turn on the power to all of your connected displays (local and remote).
7Connect the external power supply to the local transmitter unit and
plug it into an available wall outlet or (optional) a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED on the local transmitter unit
will illuminate to indicate the unit is receiving power from the external
power supply. The POWER (green) LED on the remote receiver unit will
illuminate to indicate the units are receiving power from the external
power supply.
Standard Extender Kit Installation
19-06-088-933976.indb 7 8/9/2019 9:48:10 AM
8
Note: This section applies to both B127-1A1-MM-DD and B127-1A1-SM-DD
extender kits.
The extender kits provide one of the following functions via DIP switch
settings:
• USB 1.1 – One Micro-USB input at transmitter, dual USB-A outputs at
receiver
• Bi-Directional IR –Dual 3.5 mm jacks at both the transmitter and
receiver
• RS-232 – One 3-pin phoenix connector at both the transmitter and
receiver
DIP Switch Positions Function Selection
1 (Up), 2 (Up) IR Function
1 (Up), 2 (Down) USB Function
1 (Down), 2 (Down) RS-232 Function
DIP Switch Settings
Standard Extender Kit Installation
8Turn on the power to the DisplayPort source. The OUTPUT (orange)
LED on the local unit will illuminate to indicate a signal has been
received from the source.
9The (orange) LED will illuminate on both local transmitter and remote
receiver units to indicate a signal has been received from source to
display. The screen should now display on the connected monitor.
19-06-088-933976.indb 8 8/9/2019 9:48:10 AM
9
DIP Switch Settings
(Optional) Connect the computer’s DB9 port to the transmitter unit’s
RS-232 serial port. The serial port is a 3-position phoenix connector for
RS-232 (DB connector) pin 2, 3 and 7 connection. Connect your RS-232
device (e.g. barcode scanner) to the 3-position phoenix connector on the
receiver unit.
(Optional) Connect the included IR-OUT cable to the transmitter unit’s
IR-OUT port. Place the sensor on the IR-OUT cable in an unobstructed
area within clear view of the device being controlled. Then connect the
included IR-IN cable to the receiver unit's IR-IN port. The IR-IN cable will
communicate the desired command via the transmitter’s IR-OUT cable.
Note: The IR-OUT cable receives the signal from the remote control and sends it to
the device being controlled (e.g. Blu-ray™ player, etc.).
(Optional) With a user-supplied USB Micro-B cable (such as Tripp Lite
U050-XXX Series USB cable), connect to the transmitter’s Micro-B port.
Then connect a keyboard and mouse to the available USB-A ports on the
receiver unit.
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a
period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this
warranty is limited to repairing or replacing (at its sole option) any such defective products. To
obtain service under this warranty, you must obtain a Returned Material Authorization (RMA)
number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned
to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid
and must be accompanied by a brief description of the problem encountered and proof of date
and place of purchase. This warranty does not apply to equipment, which has been damaged by
accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
19-06-088-933976.indb 9 8/9/2019 9:48:10 AM
10
Warranty and Product Registration
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE
is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of
equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing
regulations, when customers buy new electrical and electronic equipment from Tripp Lite
they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies
depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
WARNING
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety or
effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice. Photos and illustrations may differ slightly from actual products.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
19-06-088 93-3976_RevB
19-06-088-933976.indb 10 8/9/2019 9:48:10 AM
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Extensor de Tripp Lite
Tripp Lite
Tripp Lite B126-1D1-WHD1 Manual de usuario
Tripp Lite
Tripp Lite B127-1A1-DH Manual de usuario
Tripp Lite
Tripp Lite B127-1A1-WHD1 Manual de usuario
Tripp Lite
Tripp Lite B120-000-SL Manual de usuario
Tripp Lite
Tripp Lite B127F-1A1-MM-HH Manual de usuario
Tripp Lite
Tripp Lite B203-101-PNP Manual de usuario
Tripp Lite
Tripp Lite : B140-002 Manual de usuario
Tripp Lite
Tripp Lite U007-40M Manual de usuario
Tripp Lite
Tripp Lite HDMI B122-000 Manual de usuario
Tripp Lite
Tripp Lite BHDBT-K-E3SI-ER Manual de usuario
Tripp Lite
Tripp Lite B013-000 Manual de usuario
Tripp Lite
Tripp Lite B125-101-60-IR Manual de usuario
Tripp Lite
Tripp Lite B150-1A1-DVI Manual de usuario
Tripp Lite
Tripp Lite B126-1A0-U Manual de usuario
Tripp Lite
Tripp Lite B132-100 Manual de usuario
Tripp Lite
Tripp Lite P167-000 Manual de usuario
Tripp Lite
Tripp Lite Wireless Console Extender B014-000 Manual de usuario
Tripp Lite
Tripp Lite B126-1A1-WP Manual de usuario
Tripp Lite
Tripp Lite B127U-111-PDPD Manual de usuario
Tripp Lite
Tripp Lite B125-150 Manual de usuario
