Tripp Lite U339-002 Manual de usuario
1
Owner’s Manual
USB 3.0 to Dual SATA
Dock/Cloning Station
Model: U339-002
Español 9 • Français 17
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
2
Package Contents
Product Features
• U339-002
• 2.5 ft. USB 3.0 Device Cable
• External Power Supply (Input: 100-240V,
50/60 Hz, 1.5A; Output: 12V 3A)
• Owner’s Manual
• Dual SATA docking station allows the
connection of two 2.5” or 3.5” SATA I, II,
or III hard drives via the USB port on your
computer
• Quickly access your hard drive content
without the need for time consuming internal
installation
• Offline cloning functionality lets you duplicate
one hard drive onto another with the touch
of a button; no need to connect it to a host
computer
• Cloning status is displayed via Progress LEDs
• Supports USB 3.0 data transfer rates up to
5 Gbps
3
System Requirements
Product Features
• (x2) 2.5” or 3.5” SATA Hard Drive.
• Computer with an available USB port. A USB
3.0 port is required to achieve maximum
speeds up to 5 Gbps.
Note: Cloning functionality will not work if the
U339-002 is connected to a computer or any other
source via USB cable.
•
Supports UASP (Serial Attached SCSI
Protocol)
for even faster speeds than USB
3.0*
• Backward compatible with High Speed USB
2.0 and Full Speed USB 1.1
• Accepts 2.5” and 3.5” hard drives up to
6TB**
* Requires UASP-enabled host controller. UASP is
supported by Windows®8 and later, Mac®OSX
10.8 and later, and Linux®
**Will work with larger hard drives as they become
available
4
Docking Station Installation
Note: If your SATA hard drive has not been formatted
yet, you will need to format it using your computer’s
Disk Management utility in order to access it.
1. Connect the included power supply to
the unit and plug it into a Tripp Lite Surge
Protector, Power Distribution Unit (PDU), or
Uninterruptible Power Supply (UPS).
2. Insert your 2.5” or 3.5” SATA Hard Drive
into an available bay on the docking station,
making sure it is securely seated on the
SATA connector. Repeat this step to connect
an additional hard drive.
3. Connect the included USB 3.0 cable
between your computer and the docking
station.
4. Turn on power to the docking station using
the ON/OFF button on the back of the unit.
The red Power LED will illuminate to indicate
power is being received. The red Drive LEDs
will illuminate to indicate a hard drive is
connected to the corresponding port and
recognized by the computer.
5
Offline Cloning
Notes:
•If your SATA hard drive has not been formatted yet,
you will need to format it using your computer’s Disk
Management utility before proceeding with cloning.
•The replica drive’s (Bay B) capacity must be larger
than the master drive (Bay A). If its capacity is
smaller or equal to the master drive, you will not be
able to clone information onto it.
•Prior to cloning, ensure there is no important data
stored on the replica drive. Once cloning begins,
all data on the replica drive will be deleted and
replaced with the cloned data from the master drive.
•Be aware that the cloning process will take some
time (approximately 2.5 hours per 1TB). Do not
turn off power or remove hard drive before the LED
progress bars indicate the process is completed.
•Offline cloning feature will not work if the U339-002
is connected to a computer or any other source via
USB cable
1. Connect the included power supply to
the unit and plug it into a Tripp Lite Surge
Protector, PDU, or UPS.
2. Insert the 2.5” or 3.5” SATA master hard
drive (the drive you want to clone) into the
master drive (Bay A) of the docking station.
6
Offline Cloning
3. Insert the 2.5” or 3.5” SATA replica hard
drive (the drive the cloned data will be
copied to) into the replica drive (Bay B) of
the docking station.
4. Turn on power to the docking station using
the ON/OFF button on the back of the unit.
The red Power LED will illuminate to indicate
power is being received. The red Drive LEDs
will illuminate to indicate a hard drive is
connected to the corresponding port, and
ready for cloning.
5. Press the Clone button twice, pausing for
several seconds after the first press, and
then release.
6. The 25% Progress LED will blink when the
cloning begins. The Progress LEDs will
illuminate blue to indicate the percentage of
cloning completed as the process continues.
7. When all the blue Progress LEDs are
illuminated solid blue, the cloning process is
complete.
7
Warranty and Product Registration
3-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and
workmanship for a period of three (3) years from the date of initial purchase.
TRIPP LITE’s obligation under this warranty is limited to repairing or replacing
(at its sole option) any such defective products. To obtain service under
this warranty, you must obtain a Returned Material Authorization (RMA)
number from TRIPP LITE or an authorized TRIPP LITE service center. Products
must be returned to TRIPP LITE or an authorized TRIPP LITE service center
with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of
purchase. This warranty does not apply to equipment, which has been
damaged by accident, negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for
any costs, such as lost profits or revenue, loss of equipment, loss of use of
equipment, loss of software, loss of data, costs of substitutes, claims by third
parties, or otherwise.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll
be automatically entered into a drawing for a chance to win a FREE Tripp Lite
product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See
website for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
8
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by
Tripp Lite could void the user’s authority to operate this equipment.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE)
Directive and implementing regulations, when customers buy
new electrical and electronic equipment from Tripp Lite they are
entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like
basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately
becomes waste
Tripp Lite has a policy of continuous improvement. Specifications are subject
to change without notice.
Warranty and Product Registration
19-10-007 93-3613_RevC
9
Manual del Propietario
Estación de Conexión /
Clonación
USB 3.0 a SATA Doble
Modelo: U339-002
English 1 • Français 17
1111 W. 35th Street, Chicago, IL 60609 EE UU
tripplite.com/support
Copyright © 2019 Tripp Lite. Todos los derechos reservados.
MÁS DE
AÑOS
10
Contenido del Empaque
Características del Producto
• U339-002
• Cable para Dispositivos USB 3.0 de 76 cm
[2.5 pies]
• Fuente de Alimentación Externa (Entrada:
100-240V, 50/60 Hz, 1.5A; Salida: 12V 3A)
• Manual del Propietario
• La estación de conexión SATA doble permite
la conexión de dos discos duros de 2.5” o
3.5” SATA I, II o III mediante el puerto USB
de su computadora.
• Acceda rápidamente al contenido de su disco
duro sin necesidad de una instalación interna
consumidora de tiempo
• La funcionalidad de la clonación fuera de
línea le permite duplicar un disco duro en
otro con un toque de botón; sin necesidad de
conectarlo en una computadora anfitrión
• El estado de la clonación se muestra
mediante LEDs de progreso
• Admite tasas de transferencia de datos de
USB 3.0 de hasta 5 Gbps
Otros manuales para U339-002
3
Tabla de contenidos
Idiomas:
Otros manuales de Estación de acoplamiento de Tripp Lite
Tripp Lite
Tripp Lite U439-001 Manual de usuario
Tripp Lite
Tripp Lite U439-001 Manual de usuario
Tripp Lite
Tripp Lite U239-000-R Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK8-GG Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK4-S Manual de usuario
Tripp Lite
Tripp Lite U339-E02 Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK12-S Manual de usuario
Tripp Lite
Tripp Lite U239-UE1 Manual de usuario
Tripp Lite
Tripp Lite U439-002-CG2 Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK8-B Manual de usuario
Tripp Lite
Tripp Lite U339-000 Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK20BINT Manual de usuario
Tripp Lite
Tripp Lite MTB3-DOCK-03 Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK5-GY Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK17-GY Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK4-INT Manual de usuario
Tripp Lite
Tripp Lite 26399377 Manual de usuario
Tripp Lite
Tripp Lite B003-HC2-DOCK1 Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK20-B Manual de usuario
Tripp Lite
Tripp Lite U442-DOCK3-B Manual de usuario
