54
AMPLITUDE16 USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of significant magnitude to constitute a risk of
electric shock to persons.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THE AC (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
EXTENSION CORDS ARE NOT RECOMMENDED FOR USE WITH THIS PRODUCT.
THIS UNIT CONTAINS VOLTAGES WHICH CAN CAUSE SERIOUS INJURY OR DEATH. DO NOT OPERATE WITH
COVERS REMOVED. REFER ALL SERVICING TO YOUR AUTHORIZED TRINNOV AUDIO DEALER.
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE FUSES ONLY WITH THE SAME TYPE AND
RATING OF FUSES AS SPECIFIED.
Please carefully read each item of the operating instructions and safety precautions before
installing and using this product. Use extra care to follow the warnings written on the product
itself and/or in the operating instructions. Keep the operating instructions and safety precautions
for future reference.
Install the Amplitude16 on a solid, flat, level surface
that is dry, well ventilated and out of direct sunlight.
Be sure that all four feet are supported.
Do not use this apparatus near water.
To prevent fire or shock hazard, do not allow liquids
to spill or objects to fall into any openings of the
product.
Clean only with a dry cloth. Do not use liquid
solvent-based cleaners.
Protect the detachable power chords from
being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they
exit from the apparatus. If the ac cord becomes
damaged, do not use it. Immediately replace it with
a new one of the same or better rating.
To prevent damage to the analog output circuitry,
be certain not to short the output signal to ground.
Ensure that your audio output cables do not have
any internal shorts before connecting them to the
Amplitude16.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Do not open the equipment case or remove any of
the cover panels. There is no serviceable part for
this product . Refer all servicing to qualified service
personnel.
To prevent fire or shock hazard, do not allow
liquids to spill or objects to fall into any openings
of the product. Use only attachments/accessories
specified by the manufacturer.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider that the other. A grounding-
type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement
of the obsolete outlet.
Before connecting the equipment, check that the
main power supply voltage rating corresponds with
the local main power supply. The rating of the main
power supply voltage is printed on the equipment.
If replacement of the ac line fuses and/or any
internal fuses becomes necessary, replace only
with same value and type of fuse : 2x t10a 5x20mm
slow blow. Never bypass the fuses.
It is imperative that the Amplitude16 be operated in
a well ventilated environment and the immediate
external temperature be maintained as specified.
Do not expose the Amplitude
16
to humidity, steam,
smoke or excessive dampness or dust. Maximum
permissible operating conditions: 0°c to 40°c, 20-
80% relative humidity. External cooling fans may
be required in some cases.
Do not stack any equipment directly above or below
the Amplitude
16
as to protect it from overheating, as
well as the continued functionality of any equipment
near and around it.
When installing the Amplitude
16
in your system,
make certain to allow a minimum of ½ inch of
ventilation on each side of the unit. Also, allow
at least 2 inches of ventilation space above the
unit. Improper ventilation of the unit may cause
overheating, which may damage the unit and cause
a fire. Place the unit on a solid surface only. I.E. Not
on carpet, etc.
To completely disconnect the apparatus from the
ac, disconnect all power sources.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-
supply cord or plug in damaged, liquid has been
spilled or object have fallen into the apparatus,
or the apparatus has been exposed to rain or
moisture, does not operate normally or has been
dropped.
Do not expose this apparatus to dripping or
splashing and ensure that no objects filled with
liquids, such as vases, are placed on the apparatus.
The main plug of the power supply cord shall
remain readily operable.
Aftermarket and third party modifications.
Please note that any aftermarket and/or third-party
modifications will void the warranty.
The disconnect symbol, is intended to warn the user that it is required to disconnect
all power sources in order to prevent any shock hazard.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
