Trikdis W485 Manual de usuario

www.trikdis.com  UAB Trikdis  Draugystės str. 17, LT-51229 Kaunas, Lithuania  +370 37 408 040  inf[email protected]

Wi-Fi module W485

Installation manual with T16 transmitter

and SP231 security control panel

May, 2019

www.trikdis.com 2 May, 2019

module

485

Contents

SAFETY PRECAUTIONS ........................................................................................................................ 3

1 DESCRIPTION .................................................................................................................................. 4

1.1 SPECIFICATIONS ...................................................................................................................................... 4

1.2 WI-FI MODULE W485 ELEMENTS .............................................................................................................. 5

1.3 PURPOSE OF TERMINALS .......................................................................................................................... 5

1.4 LED INDICATION OF OPERATION ................................................................................................................ 5

2 SCHEMATICS FOR CONNECTING THE WI-FI MODULE W485 .............................................................. 6

3 SETTING PARAMETERS .................................................................................................................... 6

4 ADDING THE WIFI MODULE W485 TO PROTEGUS APP .................................................................... 10

www.trikdis.com 3 May, 2019

module

485

Safety precautions

The Wi-Fi module should be installed and maintained only by qualified personnel.

Please read this manual carefully prior to installation in order to avoid mistakes that can lead to malfunction

or even damage to the equipment.

Always disconnect the power supply before making any electrical connections.

Any modifications, modernization or repairs not authorized by the manufacturer shall render the warranty

void.

Please adhere to your local waste sorting regulations and do not dispose of this equipment or its

components with household waste.

www.trikdis.com 4 May, 2019

module

485

1 Description

This installation manual describes how to connect and configure the W485 to operate with the T16

transmitter and SP231 security control panel.

The Wi-Fi module W485 is compatible with the Trikdis radio transmitter T16 and control panel SP231. The

W485 sends messages wirelessly via Wi-Fi internet router to the CMS (central monitoring station). It is not

possible to control the T16 transmitter or SP231 control panel using the W485.

The W485 Wi-Fi module can also be connected along with G16 and G16T communicators. Configuration is

described in the G16 and G16T communicators‘ manuals.

It is recommended to change the W485‘s Access point and Login passwords.

Features

Connection

 Connection type: Wi-Fi.

Settings and installation

 Quick and easy installation.

 Remote configuration using an internet browser.

Communication

 One primary connection channel and one secondary

connection channel.

 Alternative sending of event logs to Protegus app, which

allows the user to monitor the security system remotely.

 The Wi-Fi module W485 uses Contact ID codes to transmit

event messages via Wi-Fi.

1.1 Specifications

Parameter Description

Power supply voltage 9-28 V DC

Current consumption 50 mA (stand-by)

Up to 150 mA (transmitting)

Compatible equipment Trikdis radio transmitter T16; Trikdis control panel SP231; cellular

communicator G16 and G16T (firmware 1.32); cellular gate controller

GV17 (firmware 1.06)

Connection to CMS TCP/IP or UDP/IP via Wi-Fi

Event transmission protocol TRK_TCP or TRK_UDP

Event sending In Contact ID codes

Encryption key 6 symbol encryption key

Wi-Fi frequency 2,4 GHz

Wi-Fi protocol 802.11 b/g/n

www.trikdis.com 5 May, 2019

module

485

Parameter Description

Security mode WPA, WPA2, WPA mixed

Network configuration type DHCP or manual network configuration (using phone or laptop)

Operating environment Temperature from –10 °C to +50 °C, relative air humidity – up to 80 %

at +20 °C

Dimensions 88 x 62 x 26 mm

Weight 80 g

1.2 Wi-Fi module W485 elements

1. Indicator lights.

2. Frontal case opening slot.

3. Terminal for external connections.

1.3 Purpose of terminals

Terminal Description

+DC Power supply terminal (9-28 V DC positive terminal)

-DC Power supply terminal (9-28 V DC negative terminal)

A RS485 Terminal A of RS485 bus

B RS485 Terminal B of RS485 bus

1.4 LED indication of operation

Indicator Light status Description

NETWORK Green solid Connected to Wi-Fi network

Yellow blinking Shows signal strength from 0 to 10

DATA Green solid Message is being sent

Yellow solid Unable to send message

STATUS Green solid No operational problems

1 blink Unable to connect to Wi-Fi network

2 blinks Poor Wi-Fi signal strength

www.trikdis.com 6 May, 2019

module

485

Indicator Light status Description

3 blinks Not connected via at least one of the channels

If none of the LED indicators are active, check the power supply and connections.

2 Schematics for connecting the Wi-Fi module W485

3 Setting parameters

Connect the W485 module to a Wi-Fi network. To do

this, use a phone or a laptop. Open the Wi-Fi access to

the internet window. Choose the network W485_xxx.

In order to connect to the W485_xxx network, you

need to enter the password (default password -

12345678) and click CONNECT.

1. Open a browser and enter the IP address

192.168.12.1. In the window that opens, enter the

password (default password – 123456). Click

www.trikdis.com 7 May, 2019

module

485

2. If the box Use DHCP is ticked in the Network

settings window, the Wi-Fi module will

automatically read the network parameters

(Gateway, Net mask, Static IP) and the module

will be assigned an IP address.

Set the necessary settings and click Save.

3. Choose a Wi-Fi network in the WIFI settings

window.

4. Enter the Wi-Fi network password.

6.Click the Join button.

www.trikdis.com 8 May, 2019

module

485

If the network is not on the Available network and

signal strengths list or if it is hidden, you must:

4. Enter the Wi-Fi network password.

5. Enter the network name in the Use custom SSID

field and tick the box.

6. Click the Join button.

7. A window will open. You must wait for the module

to connect and then click Back.

The connection will be configured and the Wi-Fi

module will be assigned an IP address.

www.trikdis.com 9 May, 2019

module

485

„General settings“ window

Account ID – enter device number.

Account ID from master – if the box is ticked,

messages will be sent with the number of the main

device (the one that the Wi-Fi module is connected

to).

Test period – period for sending TEST connectivity

check messages.

Time sync. – choose which server (receiver’s or

Protegus) to use for time synchronization.

Transparent - remove the check box to make the

module W485 work with T16 and SP231.

Internal events – settings for sending internal

events.

Set the necessary settings and click Save.

www.trikdis.com 10 May, 2019

module

485

“Reporting” window

General settings:

Backup reporting after – specify the number of

unsuccessful attempts to send a message using the

primary channel before switching to the backup

channel.

Return to primary after – specify the time period

after which the device will attempt to regain

connection via the primary channel.

Primary channel:

Mode – specify the protocol (TCP or UDP) for

sending messages.

Host – enter the receiver’s IP address.

Port – enter the receiver’s network port number.

Encryption key – enter the encryption key.

Ping interval – enter the time period in between

PING signals.

Backup channel:

Set the parameters for the backup channel. This will

ensure that if connectivity via the primary channel

is lost, events will be sent via the backup channel.

Configure the backup channel using the setting field

descriptions above.

Protegus:

Enable Protegus: - enable Protegus service the,

W485 will send notifications to Protegus app.

Set the necessary settings and click Save.

“Access settings” window

the Wi-Fi module.

Set the necessary settings and click Save.

4 Adding the Wi-Fi module W485 to Protegus app

Adding the Wi-Fi module W485, which is connected to the radio transmitter T16, to Protegus. With

Protegus the user will see the status of the system and receive event notifications.

1. Download and launch the Protegus application or use the browser version: www.protegus.eu/login

Tabla de contenidos

Otros manuales de Unidad de control de Trikdis

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis CG5 Manual de usuario

Trikdis

Trikdis E10 Manual de usuario

Trikdis

Trikdis G10T Manual de usuario

Trikdis

Trikdis E10 Manual de usuario

Trikdis

Trikdis CG5 Manual de usuario

Trikdis

Trikdis E485 Manual de usuario

Trikdis

Trikdis SP131 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario