Tricor 913 Manual de usuario

TD-472C (0501)

Model 913 Keyboard & LED

Test System

Operating Instructions

TRICOR Technical Contact

Mark Zatarski

Electronic Technician

1650 Todd Farm Drive

Elgin, Illinois 60123-1145

847 742 5542 Ext. 43

847 742 5574 Fax

TRICOR Systems Inc.

E-mail: markzatarski@tricor-systems.com

Web Page: www.tricor-systems.com

Printed in the United States of America

No part of this publication may be reproduced in any form by any means without the

express permission of TRICOR Systems Inc.

The information in this document is subject to change without notice. TRICOR

Systems Inc. makes no representations or warranties with respect to the contents of

this manual and specifically disclaims any implied warranties of fitness for a

particular purpose. TRICOR Systems Inc. assumes no responsibility for errors or

omissions in this document.

TRICOR Systems Inc.

1650 Todd Farm Drive Elgin, Illinois 60123

Phone (847) 742-5542 • Fax (847) 742-5574

Email: [email protected]

TRICOR Systems Inc.

TRICOR’s Mission Statement emphasizes Quality and

Customer Service. Should you encounter any problems with

your Model 913A Keyboard & LED Test System or

discrepancies in the manual, please let us know at

(847) 742-5542/(800) 575-0161 or Fax (847) 742-5574.

If TRICOR is made aware or discovers any discrepancies or

problems, you will be notified and corrective action will be

taken as soon as possible.

To serve you better we request that primary and alternate

persons to contact be provided on the enclosed product contact

form and returned to TRICOR. This personalized approach will

eliminate any delay in providing you with potentially important

information.

IMPORTANT

iii

TRICOR Systems Inc.

TRICOR WARRANTY REGISTRATION FORM

Customer: ___________________________________________________

Address: ___________________________________________________

___________________________________________________

Please provide the following information for use by our hotline.

• The Serial Number of the

Model 913H Keyboard & LED Test System:

Serial Number ______________

• The person(s) to contact with regard to the

Model 913H Keyboard & LED Test

System and manual:

Name Telephone No. Fax No. Email

Primary ____________________ ____________ ____________ ___________________

Alternate (1) ____________________ ____________ ____________ __________________

(2) ____________________ ____________ ____________ __________________

(3) ____________________ ____________ ____________ __________________

TRICOR Systems Inc.

Contents

Settings

System Properties ................................................................................................................. 1

Display .................................................................................................................................. 1

Hardware Installation ................................................................................................................. 1

Unit Under Test (UUT) Connection ........................................................................................... 2

Starting the Model 913 Program................................................................................................ 2

Service Mode ................................................................................................................................ 2

Setup Mode .................................................................................................................................. 3

Password Setup in Setup Mode Window ............................................................................. 3

Configuration ........................................................................................................................ 3

Preferences in Setup Mode Window .................................................................................... 4

1. Serial Number Auto Request .................................................................................... 4

2. Display Shorts Test Results on Pass ......................................................................... 4

3. Display LED Voltage Results on Pass...................................................................... 5

4. Display 7-SEG Voltage Results on Pass .................................................................. 5

5. Space Bar = Continue No Save ................................................................................ 5

6. Auto Print Result On Fail ......................................................................................... 5

7. Auto Print Result On Pass ........................................................................................ 5

8. Label Pulse On Fail .................................................................................................. 5

9. Label Pulse On Pass ................................................................................................. 5

10. Test Mode Spanish Screens ...................................................................................... 5

11. Edit Mode - Mouse Move And Place ....................................................................... 5

12. Sound Ding On Pass ................................................................................................. 6

13. Sound Ding On Fail .................................................................................................. 6

14. Short Test Delay Count ............................................................................................ 6

15. Model 911 XY Preferences ...................................................................................... 6

Edit Mode .................................................................................................................................. 6

Altering Keypad Appearance................................................................................................ 6

Edit individual key.............................................................................................................. 11

Edit individual LEDs .......................................................................................................... 12

Edit individual 7-Segment .................................................................................................. 13

Edit Short Channels ............................................................................................................ 14

Learn Mode ................................................................................................................................ 14

Entering Learn Mode .......................................................................................................... 14

Learning the Keys ...............................................................................................................15

Learning the Shorts Test ..................................................................................................... 16

Learning the LEDs.............................................................................................................. 17

Learning the 7-Segments .................................................................................................... 19

TRICOR Systems Inc.

Contents Cont'd

Test Mode ................................................................................................................................ 20

Entering Test Mode ............................................................................................................ 20

Shorts Test .......................................................................................................................... 20

Key Test .............................................................................................................................. 21

Test Results ........................................................................................................................ 21

LED Voltage Test ............................................................................................................... 22

LED Visual Test .................................................................................................................23

7-Segment Test ................................................................................................................... 23

Printing Test Results ................................................................................................................. 24

Single Test Results .............................................................................................................25

Summary of Test Results.................................................................................................... 26

Calibration/Verification ............................................................................................................ 26

APPENDIX A

Setting Model 913A ISA Bus I/O Base Address ....................................................................A.1

- 1 -

TRICOR Systems Inc.

SETTINGS

System Properties (913A only)

Click Start on the Windows taskbar, choose Settings, and then Control Panel. In the

Control Panel window, double-click the System icon. In the System Properties dialog

box, click the Device Manager tab. Double-click Computer to display the Computer

Properties dialog box. Select Input/output (I/O). Scroll down to verify that I/O address

0250-025F is not displayed in this list. This will verify that it is not in use. This I/O

address is the default setting for the 913. If it is not listed, click OK in the Computer and

System Properties dialog boxes and continue to the next step. If this address is in use on

your computer, see Appendix A.

Display

In the Control Panel window, double-click the Display icon. In the Display Properties

dialog box, click the Settings tab. Set the Desktop area to 1024x768 pixels and then

click OK. Close Control Panel.

HARDWARE INSTALLATION

1. Make sure the power to your PC is OFF.

2. Remove the computer cover.

3. Select a full PCI Bus expansion slot for the 913A CCA. Remove the slot cover.

4. Insert the 913 CCA into place carefully. Secure the adapter retaining bracket.

5. Replace the computer cover.

- 2 -

TRICOR Systems Inc.

UNIT UNDER TEST (UUT) CONNECTION

Connect unit to be tested to PC via an interface assembly having a 37-pin subminiature D

connector (supplied with 913).

STARTING THE Model 913 PROGRAM

You may now start the Model 913 program. The following instructions will guide you

through a sample exercise for a keypad with a 4x4 matrix. If the TRICOR Model 913

program group is still open, you may double-click the Model 913 icon to start the pro-

gram. If not, to open the Model 913 window click Start on the Windows taskbar, choose

Programs, then choose Model 913, and then click Model 913.

SERVICE MODE

In the TRICOR Model 913 program window (Figure 1), enter SERVICE MODE by clicking

the SERVICE button. Type TRICOR in uppercase letters in the ENTER PASSWORD field of

the PASSWORD REQUIRED window and then press Enter on the PC keyboard. At

this point the Load Hardware Configuration Data dialog box will appear. Click on

Load to load default.hdw. The Hardware Panel window (Figure 2) will appear.

Figure 1

Figure 2

- 3 -

TRICOR Systems Inc.

In the NUMBER CCAS field, select 1if you are installing one CCA. (For installation of

multiple CCAs, see Appendix A.) Go to the CCA 1 box. The I/OADDR field will show the

default setting of 250-25F. Type the serial number of the CCA you are installing in the

SERIAL NUM field. The HARDWARE STATUS DISPLAY FOR CCA field should be set at 1. Click the

Xin the upper-right-hand corner to close Hardware Panel. You are now ready to enter

SETUP MODE.

SETUP MODE

Password Setup in SETUP MODE Window

In the Password Setup box you may change, disable, or enable passwords for Model 913

Test, Setup, Service, and Configuration functions. All passwords are presently TRICOR

(uppercase). You may select each of four functions: TEST (used to test the product); SETUP

(used to modify the software); SERVICE (used when performing service functions); or

CONFIG.(used to create new test configurations) from the menu in the PASSWORD field.

Each time a selection is made, a PASSWORD ENTRY window will appear. In the ENTER

PASSWORD field, you may either keep TRICOR as your password or type your own pass-

word in the box. When entering a new password, press only those keys that you want to

be part of the new password. In the STARTUP PASSWORD/STATUS check field you have the

option of selecting PASSWORD DISABLED or PASSWORD ENABLED. Choose one or the other

and click Accept. This procedure must be repeated for each of the four functions.

In the Password Setup dialog box is a DISABLE PASSWORD/STATUS CHECK field. Here you

have the option of choosing whether or not to disable passwords while editing or creating

new configurations by selecting NO - USE START-UP STATUS or YES - DISABLE THIS EXECUTION

ONLY. Select YES - DISABLE THIS EXECUTION ONLY for this sample exercise. Click the EXIT

button in the lower right-hand corner of the SETUP MODE window. This will return you

to the TRICOR Model 913 program window.

Configuration

In the TRICOR Model 913 program window, click the SETUP button. If password is

enabled, type TRICOR (uppercase) in the ENTER PASSWORD field of the PASSWORD

ENTRY window and press Enter on the PC keyboard. The SETUP MODE window

(Figure 3) will appear. To create configurations for the keys and LEDSthat you are about

to test, go to the Operating Mode box and select EDIT MODE in the MODE SELECT field. Go

to the Edit Mode-Key/LED Matrix and Size box. In the KEY/LED SEL field, select KEY. In

the ROW SIZE and COLUMN SIZE fields, select the configuration of the keypad you wish to

test using values from 1to 15. To create the sample keypad with a 4x4 matrix, select a

row size of 4and a column size of 4. Set the WIDTH SCALE and HEIGHT SCALE values to 50.

This is a good starting point. The width and height scales determine what size the keys

will be in relation to the overall display size.

- 4 -

TRICOR Systems Inc.

Preferences in SETUP MODE Window

1. Serial Number Auto Request: When enabled, before each keypad is tested a

request for Enter Serial Number will be displayed (Figure 4). An operator may

type a serial number, or a wedge bar code reader may be used.

2. Display Shorts Test Results on Pass (Default): If shorts test passes and this

preference is enabled, the KEY CHANNEL SHORTS TEST RESULTS screen

will be displayed. The operator will be required to continue (Figure 5). If disabled

and shorts test passes screen will not be observed and no operator action required.

This screen will always be displayed if shorts test fails.

Figure 5

Figure 4

Figure 3

Tabla de contenidos

Manuales populares de Teclado de otras marcas

Vortexgear

Vortexgear POK3R Manual de usuario

Razer

Razer RZ03-0188 Manual de usuario

Logitech

Logitech RUGGED LITE Manual de usuario

Honeywell

Honeywell ADEMCO 5839 Instrucciones de montaje

Hama

Hama AK-120 Manual de usuario

Rodgers

Rodgers RK-76 Manual de usuario

Logic Controls

Logic Controls KB5000 Series Manual de usuario

Rapoo

Rapoo E9270P Manual de usuario

iKey

iKey DP-88 Manual de usuario

Logitech

Logitech G413 TKL SE Instrucciones de montaje

Keychron

Keychron C1 Manual de usuario

Dahua

Dahua NKB Manual de usuario

Ultimate Technology

Ultimate Technology 500 POS Manual de usuario

Ducky

Ducky Shine 5 Manual de usuario

Mace

Mace MACALLY MERGOKEY Manual de usuario

iKey

iKey KYB-42-KIOSK Manual de usuario

Akko

Akko MX108 Manual de usuario

Viper

Viper V770 Manual de usuario