TRENDnet TEW-816DRM Manual de usuario
ŸAC750 Wireless VDSL2/ADSL 2+ Modem Router
TEW-816DRM
TEW-816DRM (V1) /03.25.2015
ŸQuick Installation Guide (1)
ŸTEW-816DRM
ŸQuick Installation Guide
ŸCD-ROM (User's guide)
ŸPower adapter (12V DC, 1A)
ŸNetwork cable (1.5 m / 5 ft.)
ŸRJ-11 telephone cable (1.8 m / 5.4 ft)
Package Contents
1. Before You Start
1
Minimum requirements
ŸA computer with a wired or wireless network adapter and web browser Broadband internet
ŸVDSL or ADSL internet from an Internet Service Provider
2
2. Installation
2. Connect your computer's network port to one of the modem's LAN ports.
3. Connect the power adapter to the modem, and then to a power outlet. Push the power switch
to the ON position.
1. Connect the RJ-11 telephone cable to the TEW-816DRM modem's VDSL/ADSL port, then into
a phone jack.
Internet
3
1
2
3
4. To confirm that the device is fully functional, verify that the status LED indicators on the front of
the modem are lit: Power (Green), DSL (Green), Wireless (Green) and the LAN port (1, 2, 3,
4) your computer is connected (Green).
3
1. Open your web browser, type http://192.168.10.1 into the address bar of your web browser,
and press enter.
2. Log in using default Username and Password located on the front sticker or the label on the
back of the modem.
3. Once you are logged in, click Setup, and then click Setup Wizard to start configuring the
modem.
Note: It is recommended that you configure the modem from a wired computer.
3. VDSL Setup
Note: In the example below, we will be configuring a VDSL connection type with PPPoE
connection type. If you are unsure of your connection type, contact your Internet Service
Provider.
Preset
Wireless Settings
Wi-Fi Name/SSID
Wi-Fi Key
XXXXXXXXXXXXX
Management Login
192.168.10.1
username: admin
password: XXXXXX
Preset
Wireless Settings
(N/B/G)
TRENDnetXXX_2.4GHz_XXXX
4
4. Select the Internet connection mode you would like to configure, and click Next to continue.
5. Select the Internet connection type to configure, and click Next. PPPoE is selected because
it’s a common type. Confirm your connection type with your ISP.
PPPoE (RFC-2516 PPP over Ethernet)
6. Select your country and the Internet Server Provider (if your ISP is not listed select other).
Then enter your assigned PPPoE Username and Password from your ISP. Click Next to
continue.
5
7. Review your settings and click Finish to complete installation.
8. Verify that the following status lights are on: DSL (Green) and Internet (Green).
Note:
We have pre-encrypted the TEW-816DRM with a unique WI-FI Name (SSID) and Wi-Fi
Password. You can find these pre-configured settings on the label on the back of the
modem. You will use this information to connect wireless devices to the modem. To change
the Wi- Fi Key, refer to the product manual. If the modem is reset the Wi-Fi Password key
and the Wi-Fi Name will also reset to factory defaults.
‚ To log back in to the modem's management page, you will need to know the modem's user
name and password. You can find the default user name and password on the label on the
bottom of the modem.
10. Installation of your TEW-816DRM router is now complete!
9. Open a web browser and enter a web address (for example, www.trendnet.com) to verify that
you have Internet connection.
1
Preset
Wireless Settings
Wi-Fi Name/SSID
Wi-Fi Key
XXXXXXXXXXXXX
Management Login
192.168.10.1
username: admin
password: XXXXXX
Preset
Wireless Settings
(N/B/G)
TRENDnetXXX_2.4GHz_XXXX
2
6
1. Open your web browser, type http://192.168.10.1 into the address bar of your web browser,
and press enter.
2. Log in using default Username and Password located on the front sticker or the label on the
back of the modem.
3. Once you are logged in, click Setup, and then click Setup Wizard to start configuring the
modem.
Note: It is recommended that you configure the modem from a wired computer.
4. ADSL Setup
Note: In the example below, we will be configuring an ADSL connection type with PPPoE. If you
are unsure of your connection type, contact your Internet Service Provider.
Preset
Wireless Settings
Wi-Fi Name/SSID
Wi-Fi Key
XXXXXXXXXXXXX
Management Login
192.168.10.1
username: admin
password: XXXXXX
Preset
Wireless Settings
(N/B/G)
TRENDnetXXX_2.4GHz_XXXX
7
4. Select the Internet connection mode you would like to configure, and click Next to continue.
PPPoE (RFC-2516 PPP over Ethernet)
6. Select A uto-detect to have it automatically detect your VPI/VCI settings, or select
Manual selection to manually enter your settings. Click Next to continue. Please wait while the
modem scans for the proper VPI and VCI settings. If the modem is having trouble detecting the
proper VPI and VCI settings, please click Manual Selection and contact your Internet Service
Provider (ISP) for the proper VPI and VCI settings.
5. Select the Internet connection type to configure, and click Next. PPPoE is selected because
it’s a common type. Confirm your connection type with your ISP.
8
8. Review your settings and click Finish to complete installation.
9. Verify that the following status lights are on: DSL (Green) and Internet (Green).
11. Installation of your TEW-816DRM is now complete!
10. Open a web browser and enter a web address (for example, www.trendnet.com) to verify that
you have Internet connection.
7. Select your country and the Internet Server Provider (if your ISP is not listed select other).
Then enter your assigned PPPoE Username and Password from your ISP. Click Next to
continue.
9
For detailed information regarding the modem's configuration and advanced settings, please refer
to the User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com please visit
www.trendnet.com for product updates and online support.
Note:
We have pre-encrypted the TEW-816DRM with a unique Wi-Fi Name (SSID) and Wi-Fi
Password. You can find these pre-configured settings on the label on the back of the
modem. You will use this information to connect wireless devices to the modem. To change
the Wi- Fi Key, refer to the product manual. If the modem is reset the Wi-Fi Password key
and the Wi-Fi Name will also reset to factory defaults.
‚ To log back in to the modem's management page, you will need to know the modem's user
name and password. You can find the default user name and password on the label on the
bottom of the modem.
1
Preset
Wireless Settings
Wi-Fi Name/SSID
Wi-Fi Key
XXXXXXXXXXXXX
Management Login
192.168.10.1
username: admin
password: XXXXXX
Preset
Wireless Settings
(N/B/G)
TRENDnetXXX_2.4GHz_XXXX
2
Toll Free English Technical Support
US/Canada: 855-373-4741
Hours: Monday-Friday
7:00 AM- 6:00 PM, Pacific Standard Time.
After hours: 866-845-3673
Otros manuales para TEW-816DRM
2
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de TRENDnet
TRENDnet
TRENDnet TEW-817DTR Manual de usuario
TRENDnet
TRENDnet TEW-672GR Manual de usuario
TRENDnet
TRENDnet TEW-511BRP Manual de usuario
TRENDnet
TRENDnet TEW-631BRP Manual de usuario
TRENDnet
TRENDnet TEW-211BRP Manual de usuario
TRENDnet
TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M Manual de usuario
TRENDnet
TRENDnet TEW-714TRU Manual de usuario
TRENDnet
TRENDnet TEW-652BRP Manual de usuario
TRENDnet
TRENDnet TEW-692GR Manual de usuario
TRENDnet
TRENDnet AC1750 Manual de usuario
TRENDnet
TRENDnet TEW-714TRU Manual de usuario
TRENDnet
TRENDnet TEW-411BRPplus Manual de usuario
TRENDnet
TRENDnet TEW-633GR - Wireless Router Manual de usuario
TRENDnet
TRENDnet TEW-650AP Manual de usuario
TRENDnet
TRENDnet TEW-812DRU Manual de usuario
TRENDnet
TRENDnet TEW-818DRU Manual de usuario
TRENDnet
TRENDnet TEW-651BR Manual de usuario
TRENDnet
TRENDnet TEW-713RE Manual de usuario
TRENDnet
TRENDnet TEW-432BRP - Wireless Router Manual de usuario
TRENDnet
TRENDnet TEW-823DRU Manual de usuario
