TRENDnet TK-408K Manual de usuario
TK-408K
Quick Installation Guide
English ......................................................................................................
Specifications ............................................................................................
Troubleshooting ........................................................................................
1
1
2
3
5
6
1. Before You Start
2. How to Connect .................................................................................
3. Using the KVM Switch .......................................................................
.................................................................................
Table of Contents
Version 05.04.06
System Requirements
Application
VGA or SVGA Compatible Monitor
6-pin Mini-Din PS/2 Keyboard
6-pin Mini-Din PS/2 Mouse
Speakers (optional)
Microphone (optional)
1. Before You Start
English
1
TK-408
4 x 3-in-1 Combo KVM Cable
4 x Audio/Mic Cable
Quick Installation Guide
Package Content
Microphone
LCD Monitor
4-Port PS/2 Audio
KVM Switch Kit
(TK-408K)
Keyboard Mouse
Speakers
Cables
PC 3 PC 4PC 1 PC 2
Cables Cables Cables
3.
Connect the remaining end of the
3-in-1 Combo KVM Cable to an
available PC channel.
2. How to Connect
English
2
2. Connect the respective end of the
provided 3-in-1 Combo KVM
Cable and Audio/Mic Cable to
your computer.
Important: Power OFF all computers before making connections to the KVM
Switch.
Note: The included cables and KVM Switch connections are color coded for
your convenience.
1. Connect the shared Monitor,
Keyboard, Mouse, Microphone,
and Speakers to the Console Port
of KVM Switch.
Your installation is now complete.
5. Power ON the connected
computers and wait for the desktop
to appear.
4. Connect the remaining end of the
Audio/Mic Cable to the same
available PC channel.
To alternate between computers, you can use the Push Buttons on the KVM
Switch or the Hot-key commands via keyboard.
Hot-Key Commands
A keyboard hot-key command consists of three keystrokes:
Hot-Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
You then have another 2 seconds to press a command key. If you do not press
a key within 2 seconds, the switch will exit hot-key mode.
NOTE
1. Hotkey command works on top row numbers keys only.
2. When the binding of PC & Audio/Mic port switching is enabled by the hotkey
sequence,any PC and Audio/Mic switching are bound together.
3. For non-PnP OS(Linux, Windows NT 4.0), please use the following
commands to reset the mouse setting:
Hot-Key convention: The hotkey notation, denotes that you should hit the
individual key consecutively one at a time, not simultaneously.
3. Using the KVM Switch
English
3
ScrLk +ScrLk +M+1
ScrLk +ScrLk +M+2
ScrLk +ScrLk +M+3
2-key mouse setting:
3-key wheel mouse setting:
5-key wheel mouse setting:
Command Hot-Keys Description
Quick Reference Sheet for TK-408K
Select PC
Select Audio/Mic
Channel
Next higher PC
channel
Bind PC & Audio/Mic
Switching
Console Mouse/
Keyboard Reset
UnBind PC & Audio/
Mic Switching
Autoscan
Next lower PC
channel
Stop Autoscan
ScrLk ScrLk X
+ +
x = 1 ~ 2 for PC channel number
ScrLk ScrLk
+ +
(Arrow up)
ScrLk ScrLk
+ +
(Arrow down)
ScrLk ScrLk
+ + W
ScrLk ScrLk
+ + End
ScrLk ScrLk
+ + S
Press any key on keyboard
Select the active PC channel.
Select the active Audio/Mic channel
Select the next lower available computer
Enable the binding of PC port and Audio/Mic port
switching.
Reset mouse/keyboard on the console side. (works on
non-PnP OS only)
Disable the binding of PC port and Audio/Mic port
switching.
Autoscan through every connected channel for
quick screen browsing of each channel (scan delay
= 10 seconds).
Select the next higher available computer
Terminate Autoscan activity.
(Fx is a function key) FX=F1 ~ F4
ScrLk ScrLk
+ +
FX
ScrLk ScrLk
+ +
Q
English
4
Computer Connections: 4
KVM Cable Connectors
(all male):
Console Port Connectors
(all female):
Keyboard: PS/2 Keyboard 6-pin Mini Din
Mouse: PS/2 Keyboard 6-pin Mini Din
Monitor: VGA HDB 15-pin
Speaker: 3.5mm audio in/out jack
Microphone: 3.5mm microphone in/out jack
5
Specifications
To PC:
To KVM: 1 x VGA/SVGA HDB 15-pin
KVM
To PC:
Audio
To KVM:
Port Selection: Push Button and Hot-Key Commands
Auto-Scan Intervals: 5 seconds
Keyboard State: Saved and Restored
Power Type: PS/2 Interface Power
Dimensions: 167 x 80 x 28mm (6.6 x 3.2 x 1.1in.)
Weight: 178g (6.3oz.)
0º ~ 40ºC (32º ~104º F)Operating Temperature:
-20º ~ 60ºC (-4º ~ 140º F)Storage Temperature:
0%~90%, Non-Condensing
Humidity:
FCC and CECertifications:
KVM Cable: 4 sets of 1.8 M (6ft) KVM Cables
• 1 x PS/2 Keyboard 6-pin Mini Din
• 1 x PS/2 Mouse 6-pin Mini Din
• 1 X VGA HDB 15-pin
• 1 x 3.5mm audio in/out jack
• 1 x 3.5mm microphone in/out jack
• 1 x 3.5mm audio in/out jack
• 1 x 3.5mm microphone in/out jack
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Where is the power supply? I did not find one in the box.
I have the KVM switch connected properly, but my keyboard and mouse don't
work.
Please make sure your PS/2 port is working properly by testing it with your
other PS/2 devices. Once you confirm that the PS/2 port is functional, please
reboot your computers, and try to use the KVM switch again.
Can I connect and disconnect the PS/2 cables while the computers are turned
on?
Will the KVM switch remember the keyboard settings between computers?
Yes, the KVM switch will remember the keyboard settings when switching
between your computers. (i.e.: Cap lock, Num key, etc.)
How do I switch from one computer to another with the KVM switch?
The TK-408K does not require a power adapter. It draws power from your
computer's PS/2 connections. As long as your KVM Switch is connected to the
PS/2 port, it will receive the necessary power to function.
Do not try to connect the KVM Switch to the computers while the computers
are in powered-on state, because the computers may have difficulty recognizing
your shared PS/2 keyboard and PS/2 mouse.
You may switch between computers by pressing the Push Buttons on the KVM
switch or by using the Hot-Key commands via keyboard. For a list of Hot-Key
commands, refer to the "Quick Reference Sheet for TK-408K".
If you still encounter problems or have any questions regarding the TK-408K, please
contact TRENDnet's Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
6
Troubleshooting
Limited Warranty
TRENDnet warrants its products against defects in material and
workmanship, under normal use and service, for the following lengths of
time from the date of purchase.
TK-408K - 2 Year Warranty
If a product does not operate as warranted above during the applicable
warranty period, TRENDnet shall, at its option and expense, repair the
defective product or part, deliver to customer an equivalent product or
part to replace the defective item, or refund to customer the purchase
price paid for the defective product. All products that are replaced will
become the property of TRENDnet. Replacement products may be new
or reconditioned.
TRENDnet shall not be responsible for any software, firmware,
information, or memory data of customer contained in, stored on, or
integrated with any products returned to TRENDnet pursuant to any
warranty.
There are no user serviceable parts inside the product. Do not remove
or attempt to service the product by any unauthorized service center.
This warranty is voided if (i) the product has been modified or repaired
by any unauthorized service center, (ii) the product was subject to
accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within
the applicable warranty period for a Return Material Authorization (RMA)
number, accompanied by a copy of the dated proof of the purchase.
Products returned to TRENDnet must be pre-authorized by TRENDnet
with RMA number marked on the outside of the package, and sent
prepaid, insured and packaged appropriately for safe shipment.
7
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT
OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE
REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR
REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDnet NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR
USE OF TRENDnet'S PRODUCTS.
TRENDnet SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS
TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED
DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE
BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT,
FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW
TRENDnet ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY
LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION
OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY
TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT TRENDnet’S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of
the state of California.
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 Year
Warranty
8
Otros manuales para TK-408K
4
Tabla de contenidos
Otros manuales de Cambiar de TRENDnet
TRENDnet
TRENDnet TEG-S80g - Switch Manual de usuario
TRENDnet
TRENDnet TPE-80WS - Web Smart PoE Switch Manual de usuario
TRENDnet
TRENDnet TPE-1020WS Manual de usuario
TRENDnet
TRENDnet THA-103AC Manual de usuario
TRENDnet
TRENDnet TE100-S50g Manual de usuario
TRENDnet
TRENDnet TEG-S40TXD Manual de usuario
TRENDnet
TRENDnet TE100 PCIWN Manual de usuario
TRENDnet
TRENDnet TK-403KR Manual de usuario
TRENDnet
TRENDnet TEG-082WS Manual de usuario
TRENDnet
TRENDnet Web Smart Switch Series Manual de usuario
TRENDnet
TRENDnet TEG-S240TX - DATA SHEETS Manual de usuario
TRENDnet
TRENDnet TL2-E284 Manual de usuario
TRENDnet
TRENDnet TK-205K - PS/2 KVM Switch Manual de usuario
TRENDnet
TRENDnet TEG-S081Fi Manual de usuario
TRENDnet
TRENDnet TEG-S2620is Manual de usuario
TRENDnet
TRENDnet TEG-40080ES Manual de usuario
TRENDnet
TRENDnet TEG-2248WS - Gigabit Web Smart Switch Manual de usuario
TRENDnet
TRENDnet TE100-DX16 Manual de usuario
TRENDnet
TRENDnet TK-205K Manual de usuario
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch Manual de usuario
