TRENDnet TK-400K - KVM Switch - PS/2 Manual de usuario
Quick Installation Guide
H/W: D1.0R
TEG-S160TX
TEG-S240TX
Table of Contents
Table of Contents
Version 04.02.2008
English ......................................................................................................
Technical Specifications .........................................................................................
Troubleshooting ......................................................................................................
1
1
3
4
6
1. Before You Start
2. Hardware Installation .........................................................................
................................................................................
1. Before You Start
English
1
Installation Requirements
Computer with Network adapter installed
An environment that is fairly cool and dry
Package Content
TEG-S160TX/TEG-S240TX
User’s Guide
2 mounting brackets and screws
4 Rubber Feet
AC Power Adapter
EIA Standard, 19 inch rack or sturdy, level surface that can support the
weight of the Switch
An environment that is free from strong electromagnetic field generators
(such as motors), vibration, dust and direct exposure to sunlight
Leave at least 10 cm of space at the front and rear of the Switch for
ventilation
English
2
Application
Gigabit
Notebooks with
(TEG-PCBUSR)
Gigabit PC Card
(TEG-S160TX)
Servers with Gigabit PCI Adapter
(TEG-PCITXR)
Workstations with Gigabit PCI Adapter
(TEG-PCITXR)
16-Port Gigabit Switch
Notebooks with
(TEG-PCBUSR)
Gigabit PC Card
24-Port Gigabit Switch
(TEG-S240TX) Servers with Gigabit PCI Adapter
(TEG-PCITXR)
Workstations with Gigabit PCI Adapter
(TEG-PCITXR)
Gigabit
English
3
Rack Mount
The Switch can be mounted in an EIA standard-size, 19-inch rack, which can
be placed in a wiring closet with other equipment.
3. Attach the mounting brackets to
both sides of the chassis and
secure them with the provided
screws.
4. Carefully position the chassis onto
the rack. Align the bracket to the
screw holes on the rack, then use
the screws provided with the
equipment rack to mount the
chassis.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
2. Hardware Installation
1. Connect the AC Power Adapter to
the TEG-S160TX/TEG-S240TX
and then to a power outlet.
2. Connect a CAT-5e or CAT-6 RJ-45
network cable from the computer to
an available Ethernet port on the
TEG-S160TX/TEG-S240TX.
4
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Full-Duplex Flow Control
Protocol CSMA/CD
Data Transfer
Rate
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
Gigabit Ethernet: 2000Mbps (full-duplex)
Topology Star
Network Cables
Ethernet: UTP/STP CAT-3, -4, -5
Fast Ethernet: UTP/STP CAT-5
Gigabit : UTP/STP CAT-5e, CAT-6 (Recommended)
Number of Ports
Weight
Temperature
16/24 x 10/100/1000Mbps Auto-Negotiation, Auto-MDIX
3Kg
Operating: 0° ~ 40° C (32° ~ 104° F)
Storage: -10° ~ 70° C (14° ~ 158° F)
Hardware
Technical Specifications
Physical and Environmentalware
Power 100-240V AC Universal, 50/60 Hz Internal Power Supply
Power
Consumption
13.5 Watts. Max (TEG-S160TX)
19 Watts Max (TEG-S240TX)
Humidity 5% ~ 90% (non-condescending)
Dimensions 440 x 140 x 44 mm
Emissions CE, FCC
5
Filtering Address
Table 8K entries per device
Performance
RAM Buffer 340KB per device (TEG-S160TX)
500KB per device (TEG-S240TX)
Transmission
Method Store-and-Forward
Packet Filtering/
Forwarding Rate
10Mbps Ethernet: 14,880pps (packet per second)
100Mbps Fast Ethernet: 148,800pps
1000Mbps Gigabit Ethernet: 1,488,000pps
MAC Address
Learning: Self-learning, auto-aging
6
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
After connecting the Switch to a power outlet, the LEDs do not turn on.
Check the connection of the power adapter to the
and the power outlet. Also check that the power outlet is receiving
power.
When I connect a computer to the Switch port, the LINK/ACT LED turns on,
but the 1000Mbps LED remains off.
First, check the Ethernet Cable. Make sure you are using CAT-5e or CAT-6
Ethernet Cables. Some CAT-5 cables are not rated to run Gigabit. Second,
make sure that you have a Gigabit Ethernet Adapter installed on your computer.
After I connect my PCs to the Switch, I am unable to share files.
First, check the LEDs on the Switch. Make sure the LINK/ACT LED is on.
Second, check the network cable. The minimum length of the cable is 1.5 meters
and the maximum length of the cable is 100 meters. Third, disable any software
firewall program. Fourth, verify that you have file and printer sharing enabled.
Please contact Microsoft support for more information.
After I connect my PCs to the Switch, I can only get onto the Internet from one
computer.
The Switch was not designed to share Internet between multiple computers.
You need to get an Internet router.
If you still encounter problems or have any questions regarding the
please contact TRENDnet's Technical Support
Department.
TEG-S160TX/
TEG-S240TX
TEG-S160TX/TEG-S240TX
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA EN CASO DE REQUERIR AC ADAPTER
En todos nuestros equipos se mencionan claramente las caracteris-ticas del adaptador de
alimentacón necesario para su funcionamiento El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
Copyright ©2008. All Rights Reserved. TRENDnet.
20675 Manhattan Place
Torrance, CA 90501
USA
TRENDnet Technical Support
Product Warranty Registration
US Canada
24/7 Tech Support
Europe (Germany France Italy Spain Switzerland UK)
English/Espanol - 24/7
English/Espanol - 24/7
Worldwide
Toll Free Telephone: +00800 60 76 76 67
.
. . . . .
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cambiar de TRENDnet
TRENDnet
TRENDnet TK-803R Manual de usuario
TRENDnet
TRENDnet TEG-S40TXE Manual de usuario
TRENDnet
TRENDnet TEG-S240TX - DATA SHEETS Manual de usuario
TRENDnet
TRENDnet TE100-S16V Manual de usuario
TRENDnet
TRENDnet TEG-7080ES Manual de usuario
TRENDnet
TRENDnet TE100-S810Fi - Switch Manual de usuario
TRENDnet
TRENDnet TEG-3102WS Manual de usuario
TRENDnet
TRENDnet TE100-S50g Manual de usuario
TRENDnet
TRENDnet TEG-S2620i Manual de usuario
TRENDnet
TRENDnet TEG-2224WS Manual de usuario
TRENDnet
TRENDnet TU2-700 - DATA SHEETS Manual de usuario
TRENDnet
TRENDnet TEG-448WS - Switch Manual de usuario
TRENDnet
TRENDnet TEG-S50G Manual del operador
TRENDnet
TRENDnet TI-G102i Manual de usuario
TRENDnet
TRENDnet TEG-S80Dg Manual de usuario
TRENDnet
TRENDnet TEG-2 248WS Manual de usuario
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch Manual de usuario
TRENDnet
TRENDnet TI-PG1284i Manual de usuario
TRENDnet
TRENDnet TEG-240WS Manual de usuario
TRENDnet
TRENDnet TK-801R Manual de usuario
