TRENDnet TK-1603R Manual de usuario
TK-803R
TK-1603R
Quick Installation Guide
Table of Contents
Table of Contents
Version 10.27.2006
English .....................................................................................................
Specifications ............................................................................................
Troubleshooting .........................................................................................
1
1
2
4
31
32
1. Before You Start
2. How to Install .....................................................................................
3. Operation ...........................................................................................
................................................................................
System Requirements
Application
TK-803R/TK-1603R
Quick Installation Guide
Rack mount kit
AC Power Adapter (9V DC, 1A)
PS/2 or USB Keyboard
PS/2 or USB Mouse
VGA Compatible Monitor
KVM cables
Windows 98SE/ME/2000/2003 Server, Linux, and Mac
Package Contents
1. Before You Start
English
1
8/16 Ports Rack Mount
USB KVM Switch
(TK-803R/TK-1603R)
PC 2PC 4PC 6PC 8
Monitor
USB or PS/2
Mouse
USB or PS/2
Keyboard
PC 1PC 3PC 5PC 7
2. How to Install
English
2
1. Turn OFF all computers and their
peripherals, and then disconnect all
power cords.
4. Connect the included AC Power
Adapter to the KVM switch and
then to a power outlet.
2. Use the KVM cables to connect
each computer to the KVM switch.
3. Connect the shared PS/2 or USB
keyboard, monitor, and PS/2 or
USB mouse to the KVM switch's
Console Port. (TK-1603R shown)
English
3
5. Turn ON the connected computers
one-by-one and wait until each
computer's desktop appears.
7. Carefully position the switch onto
the rack. Align the bracket to the
screw holes on the rack, then use
the screws provided with the
equipment rack to mount the
switch.
The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which
can be placed in a wiring closet with other equipment.
Note: If you would like to mount the KVM switch to a EIA 19” equipment rack,
install the included mounting brackets to the sides of the KVM switch, secure
them with the screws provided, and then mount the KVM switch to the
equipment rack with the hardware provided by the equipment rack
manufacturer.
Rack Mount
6. Attach the mounting brackets to
both sides of the switch and secure
them with the provided screws.
Your installation is now complete.
English
4
3. Operation
Note: To switch between computers, you can use the front-panel push buttons
or the Hot Key commands.
LED Indicators
Red LED light: KVM cable is
connected and PC is powering the
KVM switch.
Green LED light: Indicates the
selected PC port is active, whether
the computer is turned on or off.
Push Buttons
Press the push buttons to switch
between computers.
Hot-Key Commands
A keyboard hot-key command consists of three keystrokes:
Hot-Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
You then have another 2 seconds to press a command key. If you do not press
a key within 2 seconds, the switch will exit hot-key mode.
To select a specific PC port:
For TK-803R
Select PC =
For example, to Select Port 1 on the TK-803R you hit the following key
sequence:
Select PC =
For TK-1603R
Select PC =
MAC USERS
Standard PC Keyboard to MAC Keyboard mapping information:
For example, to select Port 1 on the TK-1603R you hit the following key
sequence:
Select PC =
To select port 10 on the TK-1603, hit the following key sequence:
Select PC =
ScrLk ScrLk 1
+ +
ScrLk ScrLk Y
+ +
ScrLk ScrLk 10
+ + +
ScrLk ScrLk YZ
+ + +
ScrLk ScrLk 01
+ + +
English
5
ScrLk ScrLk C
+ + = CD/DVD drive
eject key
ScrLk ScrLk F10
+ + =
ScrLk ScrLk F11
+ + =
ScrLk ScrLk F12
+ + =
F13
F15
F14
For a list of all the Hot-Key commands, please see the Quick Reference Sheet.
Command Hot-Keys Description
Front-Panel
Buttons
Quick Reference Sheet for TK-803R/TK-1603R
Select PC
Next lower channel
Autoscan
Next higher channel
Autoscan with
Programmable
Delay Time
Autoscan Beep
Sound On/Off
Mouse/Keyboard
Reset KVM
Restore to Factory
Defaults
Define Hotkey
Sequence
(default = ScrLK +
ScrLK)
Stop Autoscan
ScrLk ScrLk
+ +
(Arrow up)
ScrLk ScrLk
+ +
(Arrow down)
ScrLk ScrLk
+ + B
ScrLk ScrLk
+ + END
ScrLk ScrLk
+ + R
ScrLk ScrLk
+ + S
Press any key on keyboard
Select the active PC channel
Press the Push Button
for a specific port to
switch to that port
Select the next lower PC
channel
Autoscan through every
connected channel for quick
screen browsing of each
channel
Select the next higher PC
channel
Autoscan through every
connected channel for quick
screen browsing of each
channel in intervals of X
seconds
Toggle On/Off beep sound
during Autoscan mode.
Resets Mouse/Keyboard
Restore to Factory Defaults
Select the hotkey preceding
sequence among 5 options
Terminate Autoscan activityPress any button
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
ScrLk ScrLk Y
+ +
(YZ)= 2-digit channel number
TK-803R
TK-1603R
ScrLk ScrLk YZ
+ + +
Y = Scroll Lock, Caps Lock, Esc, F12 or
Num Lock
ScrLk ScrLk HY
+ + +
(X) = 0~9
1 = 10 seconds
2 = 20 seconds
3 = 30 seconds
4 = 40 seconds
5 = 50 seconds
6 = 60 seconds
7 = 70 seconds
8 = 80 seconds
9 = 90 seconds
0 = 100 seconds
ScrLk ScrLk SX
+ + +
English
6
Note: If you have defined a different hotkey preceding sequence key (e.g. Caps
Lock, Esc, F12), press that button instead of scroll lock. For example, if you
want to turn off beep and have defined the hotkey preceding sequence key as
F12, press F12 + F12 + B.
7
Port Selection: Push Button and Hot-Key Commands
Keyboard State:
Power:
Saved and restored
LED Segment: Per Port : PC Link (Green) ; PC Active (Red)
Management: TK-803R: 8 computers
TK-1603R: 16 computers
Console Port Connectors:
1 x USB keyboard Type A
1 x USB mouse Type A
1 x PS/2 keyboard 6-pin mini din female
1 x PS/2 mouse 6-pin mini din female
1 x VGA HDB 15-pin female
PC Port Connectors:
(all female)
TK-803R: 8 x VGA HDB 15-pin
TK-1603R: 16 x VGA HDB 15-pin
VGA Resolution: 2048 x 1536
Specifications
Weight: TK-803R : 1.84 kg (4.05 lbs)
TK-1603R : 2.04 kg (4.5 lbs)
0ºC ~ 40ºC (32ºF ~104ºF)Operating Temperature:
-20ºC ~ 60ºC (-4ºF ~ 140ºF)Storage Temperature:
0%~90%, Non-Condensing
Humidity:
FCC and CECertifications:
Auto-Scan Intervals: 10 ~ 100 seconds
PS/2 Interface Power
USB Interface Power
External AC Power Adapter : 9V DC, 1A
Size (19" Rack mount):
Dimensions:
1RU
405 x 163 x 44 mm (15.94 x 6.42 x 1.74 in.)
8
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Q6:
A6:
Do I need to use the included external AC adapter?
It is recommended that you use the included external AC adapter with the
TK-803R/TK-1603R KVM switch.
I have the KVM switch connected properly, but my USB keyboard and mouse
don't work.
First, make sure your USB port is working properly by testing it with your other
USB devices. Second, once you confirm that the USB port is functional, please
reboot your computers, and try to use the KVM switch again. Third, if your
computer is running Windows 98SE, you may need to download and install the
USB hot fix. Please go to this link for download and installation instructions:
http://support.microsoft.com/kb/q240075. Once the hot fix is installed, follow the
installation instructions in Section 2.
Can I connect or disconnect the KVM cables while the computers are turned
on?
Yes, you can connect or disconnect the KVM cables while the computers are
turned on, because the interface is Hot-Pluggable.
Yes, the KVM switch will restore the keyboard settings when switching
between computers. (i.e.: Caps Lock, Num Lock, etc.)
Go to Section 3 Operation for more information.
If you still encounter problems or have any questions regarding the TK-803R/
TK-1603R please contact TRENDnet's Technical Support Department.
Will the KVM switch restore the keyboard settings when switching between
computers?
How do I switch from one computer to another with the KVM switch?
You can switch PCs by pressing the push button on the KVM switch or by
using the Hot-Key commands.
How to upgrade new firmware to my KVM switch?
Please go to the TRENDnet website (www.trendnet.com) to check if there is a
new firmware available for your KVM switch and follow the installation procedure
to perform the update.
Otros manuales para TK-1603R
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de TRENDnet
TRENDnet
TRENDnet TFU-430 Manual de usuario
TRENDnet
TRENDnet TE100-S16plus Manual de usuario
TRENDnet
TRENDnet TU-700 Manual de usuario
TRENDnet
TRENDnet TEG-424WS Manual de usuario
TRENDnet
TRENDnet TPE-S160 Manual de usuario
TRENDnet
TRENDnet THA-103AC Manual de usuario
TRENDnet
TRENDnet TE100-S800i Manual de usuario
TRENDnet
TRENDnet TE100-S1616V Manual de usuario
TRENDnet
TRENDnet TPE-S50 Manual de usuario
TRENDnet
TRENDnet TEG-S2400I - DATA SHEETS Manual de usuario
TRENDnet
TRENDnet TE100-SK1plus Manual del propietario
TRENDnet
TRENDnet TEG-S50TXE SHEETS Manual de usuario
TRENDnet
TRENDnet TK-204UK - DVI USB KVM Switch Manual de usuario
TRENDnet
TRENDnet TEG-S4M8TX Manual de usuario
TRENDnet
TRENDnet TE100-S50g Manual de usuario
TRENDnet
TRENDnet TPE-80WS - Web Smart PoE Switch Manual de usuario
TRENDnet
TRENDnet TPE-T80 Manual de usuario
TRENDnet
TRENDnet TEG-424WS Manual de usuario
TRENDnet
TRENDnet TK-200K Manual de usuario
TRENDnet
TRENDnet TK-401R Manual de usuario
