Transition Networks Mil-sm8dpa Manual

Read Me First

MIL-SM8DPA Packing List:

Before you start installing MIL-SM8DPA Managed Switch, please verify that the package

contains the following items:

6-Port 100/1000 Dual Speed SFP + 2-Port RJ-45/ 100/1000SFP Managed Switch

AC Power Cord

User’s Guide CD-ROM

RJ-45 Transform RS-232 Cable

Please notify your sales representative immediately if any of the aforementioned items is

missing or damaged.

Power Requirements: AC Line

Voltage : 100240 VAC

Frequency : 5060 Hz

Consumption : 40W

Quick Installation:

1. Install the switch in the rack with mounting accessory.

2. Connect the MIL-SM8DPA switch to an AC power source.

3. The port 1–8 connector is LC SFP on the switch. Use Single-mode or Multi-mode Fiber

cable to connect between MIL-SM8DPA and end station.

4. The port 7, 8 includes two types of media --- TP and (100/1000M) SFP fiber module; they

support TP or fiber with auto-detected function.

5. Use RJ-45 interface to pre-configure MIL-SM8DPAfor network management.

For example: IP address, VLAN, Port Trucking, STP, etc.

MIL-SM8DPA switch’s serial port default settings are listed as follows:

Baud rate 115,200

Stop bits 1

Data bits 8

Parity N

Flow control none

The default values of MIL-SM8DPA switch are as follows:

IPAddress : 192.168.1.77

Subnet Mask : 255.255.255.0

Default Gateway : 192.168.1.254

Username : admin

Password : root

User also can use telnet or web to pre-configure MIL-SM8DPA with the default IP

address and username/password in the first configuration. Please refer to User’s Guide

contained in CD-ROM for details on the setting of parameters. MIL-SM8DPA user’s

manual is filed under the path: \manual of the CD-ROM.

MIL-SM8DPA

ReadMe First

Date: March 20

Revision A

Warning:

Self-demolition on Product is strictly prohibited. Damage caused by self-demolition will

be charged for repairing fees.

Do not place product at outdoor or sandstorm.

Before installation, please make sure input power supply and product specifications are

compatible to each other.

The SSL only provide the CLI for switch management and SSH default

enable without UI for management.

The TACACS+ feature for management authentication purpose.

Before importing / exporting configuration please make sure the firmware

version is always the same.

After firmware upgrade, the switch will remove the configuration

automatically to latest firmware version.

10900 Red Circle Drive

Minnetonka, MN 55344

Tel.: +1.952.941.7600

[email protected]

Otros manuales para mil-sm8dpa

Tabla de contenidos

Otros manuales de Cambiar de Transition Networks

Transition Networks

Transition Networks SM24TBT2DPA Manual de usuario

Transition Networks

Transition Networks SM24T6DPA Manual de usuario

Transition Networks

Transition Networks SISPM1040-3248-L Instrucciones de funcionamiento y mantenimiento

Transition Networks

Transition Networks MIL-S800I-V2 Manual de usuario

Transition Networks

Transition Networks Milan MIL-SM8002TG Manual de usuario

Transition Networks

Transition Networks SISGM-CHAS L2 Manual de usuario

Transition Networks

Transition Networks E-TBT-HB-0402 Manual de usuario

Transition Networks

Transition Networks SM12DP2XA Manual de usuario

Transition Networks

Transition Networks SM24-100SFP-AH Manual de usuario

Transition Networks

Transition Networks LANMaster T8-FL Manual de usuario

Transition Networks

Transition Networks mil-sm8dpa Manual de usuario

Transition Networks

Transition Networks MIL-S2400S Manual de usuario

Transition Networks

Transition Networks SISPM1040-582-LRT Manual de usuario

Transition Networks

Transition Networks STACKMASTER TX12 Manual de usuario

Transition Networks

Transition Networks SISTM1040-262D-LRT Manual de usuario

Transition Networks

Transition Networks SM24DP4XA Manual de usuario

Transition Networks

Transition Networks SISPM1040-3166-L Manual de usuario

Transition Networks

Transition Networks LANMaster T8 Manual de usuario

Transition Networks

Transition Networks SISTG1040-242-LRT Manual de usuario

Transition Networks

Transition Networks SISPM1040-582-LRT Manual de usuario

Transition Networks

Transition Networks SM24T6DPA Manual de usuario

Transition Networks

Transition Networks SISTP1040-382B-LRT Manual de usuario

Transition Networks

Transition Networks SM24TAT2DPA Manual de usuario

Transition Networks

Transition Networks E-TBT-HB-1600 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario