Transcend TS0/128/256MFLRD7 Manual de usuario

Multi-Card Reader

User’s Manual

P/N TS0/128/256MFLRD7

Table of Contents

Introduction

Package Contents................................................................................................................1

Features ................................................................................................................................ 1

System Requirements ......................................................................................................... 2

Driver Installation

Driver Installation for Windows 98/98SE and 2000........................................................... 2

Driver Installation for Mac OS 9.x....................................................................................... 3

To Use the Multi-Card Reader

To Use with Windows 98/98SE and 2000........................................................................... 3

To Use with Windows Me and XP....................................................................................... 4

To Use with Mac OS 9.x....................................................................................................... 6

To Use with Mac OS X 10.1.2 or Later................................................................................ 6

To Use with Linux Kernel 2.4 or Later................................................................................ 6

To Safely Remove the Multi-Card Reader

To Remove in Windows 98/98SE........................................................................................ 7

To Remove in Windows 2000, Me, and XP ........................................................................ 7

To Remove in Mac OS and Linux ....................................................................................... 8

LED Indicators.......................................................................................................... 9

Specifications.......................................................................................................... 10

Ordering Information......................................................................................... 10

USB Card Reader Limited Warranty

Introduction

Thank you for purchasing Transcend’s Multi-Card Reader, a small device designed for fast,

easy data storage and exchange using multiple types of storage media: CompactFlash

Type I/II, Microdrive™, SmartMedia, Secure Digital, miniSD (with adapter), MultiMe-

diaCard™, RS-MMC (with adapter), Memory Stick®, Memory Stick PRO®, Memory Stick Duo®

(with adaptor) and Memory Stick PRO Duo®(with adaptor), and a built-in Flash Disk (0MB,

128MB or 256MB). Transcend’s Multi-Card Reader is an easily installed device that needs

only a USB interface to allow its use by any PC, Mac, or notebook computer. In addition, its

mobility, strong data retention ability, and impressive appearance will provide you with a

brand-new experience.

Package Contents

The Multi-Card Reader package includes the following items:

• Multi-Card Reader

• Leather Case

• Driver CD

• USB Extension Cable

• Quick Installation Guide

Features

The Multi-Card Reader has the following features:

• Compliant with USB specification version 2.0;

• Easy Plug and Play installation;

• USB bus powered (no external power needed);

• Supports multiple types of storage media:

CompactFlash Card Type I/II

Microdrive

SmartMedia Card

Secure Digital Card

miniSD (with adapter)

MultiMediaCard

RS-MMC (with adapter)

Memory Stick

Memory Stick PRO

Memory Stick Duo (with adapter)

Memory Stick PRO Duo (with adapter)

Flash Disk (built-in 0MB, 128MB or 256MB)

• High-speed transfer rate of up to 480Mbit/sec; and

• LEDs to indicate card insertion and data traffic.

System Requirements

• Desktop or notebook computer with a USB port

• One of the following operating systems:

- Windows®98/98SE, Windows®2000

- Windows®Me, Windows®XP (no driver needed)

- Mac™ OS 9.x

- Mac™ OS X 10.1.2 or later (no driver needed)

- Linux kernel 2.4 or later (no driver needed)

Driver Installation

Driver Installation for Windows 98/98SE and 2000

1. Power on the computer to which you will connect the Multi-Card Reader and make sure

the USB port is enabled and working properly. (Do not plug your Multi-Card Reader into

the USB port at this time).

2. Insert the Driver CD into the CD-ROM drive (Auto-Run supported). Click the Driver but-

ton.

3. The InstallShield Wizard guides you through the installation process.

4. Restart your computer to complete driver installation.

 You can uninstall the Multi-Card Reader and driver by running Add/Remove Pro-

grams in Settings > Control Panel. Follow the on-screen instructions to complete

the process.

Driver Installation for Mac OS 9.x

1. Power on the computer to which you will connect the Multi-Card Reader and make sure

the USB port is enabled and working properly. (Do not plug your Multi-Card Reader into

the USB port at this time).

2. Insert the Driver CD into the CD-ROM drive and run the Install program under the Mac

folder on the Driver CD.

3. Restart the computer to complete the installation process.

To Use the Multi-Card Reader

Secure Digital, miniSD (with adapter), MultiMediaCard, RS-MMC (with adapter), Memory

Stick, Memory Stick PRO, Memory Stick Duo (with adaptor) and Memory Stick PRO Duo (with

adaptor) use the same slot on the Multi-Card Reader. Only one type of media can be used in

this slot at a time.

To Use with Windows 98/98SE and 2000

1. Complete the driver installation.

2. Connect the Multi-Card Reader to an available USB port directly (or via the USB exten-

sion cable).

3. Your computer automatically recognizes the Multi-Card Reader and shows the “New

Hardware Found” message boxes. Windows installs the files needed to use your device.

4. Four Removable Disk drives with newly assigned drive letters appear in My Computer.

The Multi-Card Reader is ready for use.

 For the Multi-Card Reader with 0MB Flash Disk, only three newly assigned Re-

movable Disk drives appear in My Computer.

 To safely remove the memory card, you must make sure that no LED is blinking (no

data are being transmitted).

To Use with Windows Me and XP

The Multi-Card Reader is a driver-free device for Windows Me and Windows XP. You can

connect it to an available USB port directly (or via the USB extension cable) and don't have to

install a special driver. Windows Me and Windows XP will detect the device and automatically

install all the associated files required for its use.

The process sequence is listed below:

WARNING: Never remove or insert a memory card or disconnect the USB cable

while data are being transmitted. To avoid improper shutdown, open the transmit-

ted file from its new location to ensure transmission has been com

leted.

Four Removable Disk drives with newly assigned drive letters appear in My Computer. The

Multi-Card Reader is ready for use.

 For a Multi-Card Reader with 0MB Flash Disk, only three newly assigned Remov-

able Disk drives appear in My Computer.

 To safely remove the memory card, you must make sure that no LED is blinking (no

data are being transmitted).

WARNING: Never remove or insert a memory card or disconnect the USB cable

while data are being transmitted. To avoid improper shutdown, open the transmit-

ted file from its new location to ensure transmission has been successful.

To Use with Mac OS 9.x

1. Complete the driver installation.

2. Connect the Multi-Card Reader to an available USB port directly (or via the USB exten-

sion cable).

3. Insert a memory card into the Multi-Card Reader. A disk icon appears on the desktop.

You can then use the memory card as if it were a Mac HardDisk.

 With a built-in Flash Disk (128MB or 256MB), you can use the Multi-Card Reader as

if it were a Mac HardDisk without a memory card inserted.

 To safely remove the memory card, drag and drop the corresponding disk icon onto

the trashcan icon. After the disk icon disappears, you can remove the memory card.

To Use with Mac OS X 10.1.2 or Later

The Multi-Card Reader is a driver-free device for Mac OS X 10.1.2. You can connect it to an

available USB port directly (or via the USB extension cable) and you do not have to install a

special driver. Mac OS X 10.1.2 detects the device. Insert a memory card into the Multi-Card

Reader. A disk icon appears on the desktop. You can then use the memory card as if it were

a Mac HardDisk.

 With a built-in Flash Disk (128MB or 256MB), you can use the Multi-Card Reader as

if it were a Mac HardDisk without a memory card inserted.

 To safely remove the memory card, drag and drop the corresponding disk icon onto

the trashcan icon. After the disk icon disappears, you can remove the memory card.

To Use with Linux Kernel 2.4 or Later

The Multi-Card Reader is a driver-free device for Linux kernel 2.4 or later. Follow the pro-

cedures below to mount and use it.

1. Add the following two commands into /etc/modules.conf:

options scsi_mod max_scsi_luns=4

below usb_storage sd_mod

2. Plug the Multi-Card Reader into an available USB port and restart the computer. Your

computer automatically detects the Multi-Card Reader.

WARNING: Never remove or insert a memory card or disconnect the USB cable

while data are being transmitted. To avoid improper shutdown, open the transmit-

ted file from its new location to ensure transmission has been successful.

WARNING: Never remove or insert a memory card or disconnect the USB cable

while data are being transmitted. To avoid improper shutdown, open the transmit-

ted file from its new location to ensure transmission has been successful.

3. Create a directory for the Multi-Card Reader.

Example: mkdir /mnt/CardReader

4. Mount the Multi-Card Reader.

Example: mount –a –t msdos /dev/sda1 /mnt/CardReader

 Mapping of Disks:

For Multi-Card Reader with 0MB Flash Disk:

SmartMedia /dev/sda

MMC/SD/MS /dev/sdb

CF/Microdrive /dev/sdc

For Multi-Card Reader with 128MB or 256MB Flash Disk:

Built-in Flash /dev/sda

SmartMedia /dev/sdb

MMC/SD/MS /dev/sdc

CF/Microdrive /dev/sdd

 To safely remove the memory card, unmount the device from the Linux environment.

Example: umount /mnt/CardReader

To Safely Remove the Multi-Card Reader

To Remove in Windows 98/98SE

Make sure that no LED is blinking (no data are being transmitted). You can remove the

Multi-Card Reader from the USB port directly.

To Remove in Windows 2000, Me, and XP

1. Click the icon on the system tray.

2. The Safely remove USB Mass Storage Device pop-up message appears. Click it to

continue.

WARNING: Never remove or insert a memory card or disconnect the USB cable

while data are being transmitted. To avoid improper shutdown, open the transmit-

ted file from its new location to ensure transmission has been successful.

3. The Safe To Removed Hardware blurb appears. The Multi-Card Reader is now ready

to be removed.

 If you attempt to remove the Multi-Card Reader without following the above steps,

the Unsafe Removal of Device message (in Windows 2000) appears.

To Remove in Mac OS and Linux

When there is no memory card in the Multi-Card Reader, you can disconnect the device

from the USB port at any time.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de tarjetas de Transcend

Transcend

Transcend TS0MFLRD6 Manual de usuario

Transcend

Transcend USB2.0 6-in-1 Card Reader TS0MFLRD6A Manual de usuario

Transcend

Transcend RDS1/S2/S5/S6 Manual de usuario

Transcend

Transcend USB2.0 Compact Card Reader TS-RDP6 Manual de usuario

Transcend

Transcend m2 Instrucciones de montaje

Transcend

Transcend TS256MFLRD7 Manual de usuario

Transcend

Transcend TS-RDM1 Manual de usuario

Transcend

Transcend Compact Card Reader S1 Manual de usuario

Transcend

Transcend TS0MFLRD8E Manual de usuario

Transcend

Transcend TS0MFLRD6E Manual de usuario

Transcend

Transcend TS0MFLRD8B Manual de usuario

Transcend

Transcend USB 2.0 Compact Card Reader TS-RDS1 Manual de usuario

Transcend

Transcend TS-RDC Manual de usuario

Transcend

Transcend TS0MFLRD7 Manual de usuario

Transcend

Transcend TS-RDM5W/R Manual de usuario

Transcend

Transcend Multi-Card Reader M5 Manual de usuario

Transcend

Transcend USB2.0 Portable Card Reader TS-RDS6W Manual de usuario

Transcend

Transcend TS-RDM1 Manual de usuario

Transcend

Transcend USB 2.0 Compact Card Reader TS-RDS1 Manual de usuario

Transcend

Transcend USB2.0 6-in-1 Card Reader TS0MFLRD6A Manual de usuario

Transcend

Transcend TS-RDS5W Manual de usuario

Transcend

Transcend TS0MFLRD8B Manual de usuario

Transcend

Transcend 3-in-1 Card Reader/Writer TS0MFLRD Manual de usuario

Transcend

Transcend Multi-Card Reader Manual de usuario

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Rosslare

Rosslare DR-6255 Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

ACS

ACS ACR122L Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

ACS

ACS ACR310 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario