Trane TZEMT400BB32MMA Manual de usuario

Contents

Product Speciﬁcations............................................2

Operation..................................................................3

Thermostat Control Screen Function Control

Buttons....................................................................... 4

Minimized Display Mode .......................................... 5

Menu Map .................................................................6

User Settings ...........................................................7

Set Clock .................................................................... 7

Filter Service ............................................................. 8

Maint Service............................................................. 9

Screen Timeout ........................................................ 10

F/C Settings ..............................................................11

Sensor Calibration................................................... 12

Backlite/Display....................................................... 13

Usage Graph ..........................................................14

ESM Setpoints .......................................................15

ZWave Install..........................................................16

Inclusion................................................................... 16

Exclusion.................................................................. 16

Inclusion and Exclusion .......................................... 16

Thermostat Info .....................................................17

Installer Settings....................................................18

System Settings ....................................................... 19

Thermostat Recovery Operation............................. 19

Mechanical Settings ................................................ 20

Fan Cycler Settings ................................................. 20

Schedules...............................................................21

Installation..............................................................24

Warranty .................................................................25

Index .......................................................................26

Thermostat

Model TZEMT400BB32MAA

User Guide

Product Speciﬁcations

Specication Description

Product Model: TZEMT400BB32MAA

Product: Thermostat for Heating and Cooling HVAC System control.

Z-Wave™ RF communications enabled

Thermostat

Size: 5.7” wide x 4.0” height x 1.2” depth

Display: Graphical LCD, 2.75” x 1.5”, 64x128-pixel

Backlight: Yes, Blue/white, Controllable, on, off, timeout

Contrast: Adjustable on screen

Buttons: 6

Power: 24VAC from HVAC System

HVAC System Type

Compatible:

Standard (gas/electric) or Heat Pump

Multistage System Compatible: Standard HVAC Systems: 2 stage heating, 2-stage cooling

Heat Pump Systems: 3 stage heating (2-compressor, 1 aux heat), 2-stage cooling

Heat Pump change over valve: Selectable change over with cool or with heat

Communications: Z-Wave™ RF

Operation

The model TZEMT400BB32MAA thermostat provides typical thermostat control of a central heating and cool-

ing HVAC system. This thermostat also features a Z-Wave™ module for remote control.

72 77 H

11:15 PM

Sys O

Run

Filter AUTO

MODE AUTO

FAN RUN

74 C

Setpoint

Up/Down Buttons

Temperature

Setpoint Display

Function Control Buttons

Dynamic Labels

Clock Display

Te mperature

Ambient

Display

Normally, the thermostat displays the thermostat control screen as shown above.

Item Description Notes

Clock Display The current time is displayed in the upper

left corner of the main screen. The time will

blink when the clock has not been set.

See "User Settings", Set Clock for

instructions to set time, date, and day.

Function Control Buttons

and Dynamic Labels

As you press the function buttons and

navigate through menus, the button labels

will change. Dynamic button labels are

displayed above or beside each button.

Setpoint Display and

Setpoint Up/Down

Buttons

The current heat and cool temperature

setpoints are displayed. These setpoints

may be set using the Z-Wave control

system, by pressing the Setpoint Up/

Down buttons, or through the thermostat’s

internal schedule

Note: If the system mode is set to HEAT

the setpoint Up/Down buttons change the

heat setpoint. If the system mode is set

to COOL the setpoint Up/Down buttons

change the cool setpoint. In AUTO mode,

the buttons change the heating or cooling

setpoint of the last active mode.

The setpoints will push each other if they

are adjusted to within the minimum heat/

cool separation setting. This is normally 3

degrees.

The internal schedule is disabled by

default. See system setting H/C Delta for

more information.

Temperature Display The thermostat displays the ambient

temperature as sensed by the internal

temperature sensor.

The internal temperature sensor can be

calibrated. See the Sensor Calibration

section.

Thermostat Function Control Buttons

72 77 H

11:15 PM

Sys O

Run

Filter AUTO

MODE AUTO

FAN RUN

74 C

System

Mode Button

Fan Mode

Button

Schedule

Mode Button

Menu Button

Button Description

Menu Other thermostat menus can be accessed by pressing the MENU button.

System Mode Used to change the system mode

Off: System off

Heating: Heating only on

Cooling: Cooling only on

Auto: Heating/Cooling on as necessary

Fan Mode Used to change the fan mode

Auto: Fan on when cooling/heating is necessary

On: Fan constantly on

Schedule Mode Used to change the schedule mode

Hold: System maintains the current temperature setpoints. Schedules are disregarded.

Run: Run the system schedule (or Z-Wave controlled schedule)

Energy Saving Mode: Temperature setpoints in ESM Setpoints are maintained. See

ESM Setpoints for more information.

Minimized Display Mode

Optionally, you can set the thermostat to show only the temperature in minimized display mode. This mode can

be enabled or disabled in the Users Settings screen.

ÎSee Screen Timeout on page for more information.

Menu Map

The menus are accessed by pressing the MENU button on the main screen.

A. "User Settings"

1. Set Clock

2. Filter Service

3. Maint. Service

4. Screen Timeout

5. F/C Settings

6. Sensor Callibration

7. Backlite/Display

B. "Usage Graph"

C. "ESM Setpoints"

D. "ZWave Install"

E. "Thermostat Info"

F. "Installer Settings" (hidden)

1. Display Lock

2. System Settings

a. Mechanical Settings

1. Type

2. Fan Type

3. C/O Type

4. 2nd Stage Heat

5. Aux Heat

6. 2nd Stage Cool

b. Sched Enable

c. Recovery Enable

d. H/C Delta

e. H Delta Stg1 ON

f. H Delta Stg1 OFF

g. H Delta Stg2 ON

h. H Delta Stg2 OFF

i. H Delta Stg3 ON

j. H Delta Stg3 OFF

k. C Delta Stg1 ON

l. C Delta Stg1 OFF

m. C Delta Stg2 ON

n. C Delta Stg2 OFF

3. Fan Cycler

4. Min Cool SP

5. Min Run Time

6. Min Off Time

7. T-Sense Match

8. Fan Cycler

a. Fan ON Time

b. Fan OFF Time

9. Restore Defaults

G. "Schedules" (disabled by default)

1. Heat and Cool

2. Preset: Comfort

3. Preset: EnergyStar

4. Copy (small c on each schedule screen)

User Settings

A.1 Set Clock

The Set Clock screen allows you to set the thermostat’s internal clock.

ÎIf the clock has been reset by an extended power outage, press the MENU button, scroll to the User Settings button and

select, select the Set Clock screen and set clock.

Set Clock

Back Set

Time 11: 15 AM

Date 01/01/09

Day Thu

Set the Clock

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Set Clock and press the Select button.

4. Scroll to the item you want to change (hour, minute, day part, month, day, year, day of week).

5. Press the plus (+) or minus (-) buttons to adjust the item.

6. Press the Set button to save the changes.

Filter Service

The Filter Service screen will show the accumulated Filter Runtime hours as well as the Service Interval that

will be used to trigger a Filter Message. Any type of HVAC operation that causes the HVAC system fan to run

will cause the Filter Runtime value to increase.

When the Runtime hours equals the Service Interval hours, a “Filter” message will appear to remind you to re-

place the media ﬁlter or service the air cleaner. Once the ﬁlter has been replaced, press the Reset button to reset

the Filter Runtime value to zero.

Filter Service

Done Reset

Filter Runtime 184 HRS

Service Interval 300 HRS

View/Reset Filter Runtime

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Filter Service and press the Select button. The Filter Runtime is displayed in hours.

4. To reset the Filter Runtime counter, press the Reset button.

ÎThe Filter Runtime counter should be reset each time the lter is changed.

Change the Filter Service Interval

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Filter Service and press the Select button.

4. Press the plus (+) or minus (-) buttons to adjust the service interval.

ÎThe service interval can be set between 100 and 4000 hours in 100 hour increments. Factory default is 300 hours.

Disable the Filter Service Interval

When the ﬁlter service interval is disabled, the runtime counter will continue to count the runtime, but the ﬁlter

service indicator will never be displayed.

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Filter Service and press the Select button.

4. Press the minus (-) button until Disabled is displayed

Maint Service

The Maintenance Service screen shows the accumulated Heat and Cool Runtime hours as well as the Service

Interval that will be used to trigger a Maintenance Message. Any HEAT or COOL type of HVAC operation will

cause the respective Runtime values to increase.

When the combined HEAT and COOL Runtime hours equals the Service Interval hours, a “Maint” message will

appear to remind you your HVAC system may require periodic maintenance. Press the Menu button to enter the

Maintenance Service screen. The Reset button can be pressed and the HEAT and COOL Runtime values will be

reset to zero.

Maintenance Service

Done Reset

Heat Runtime 200 HRS

Cool Runtime 300 HRS

Service Interval 3000HRS

Change the Maintenance Service Interval

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Maint Service and press the Select button.

4. Press the plus (+) or minus (-) buttons to adjust the service interval.

ÎThe service interval can be set between 200 and 4000 hours in 100 hour increments.

Disable the Maintenance Service Interval

When the maintenance service interval is disabled, the runtime counter will continue to count the runtime, but

the maintenance service indicator will never be displayed.

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Maint Service and press the Select button.

4. Press the minus (-) button until Disabled is displayed

Screen Timeout

This is the time before any screen reverts to the Minimized Screen (temperature display only), after you stop

pushing buttons. Minimized Screen feature is disabled by setting this time to “0”.

User Settings

Set Clock

Filter Service

Maint Service

Screen Timeout 0

Done Select

Change the Screen Timeout

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Screen Timeout

4. Press the plus (+) or minus (-) buttons to adjust the time (in seconds).

ÎThe screen time-out can be set between 0 and 120 seconds. Zero (0) is the default setting. When set to Zero (0), the

minimized screen feature is disabled.

Disable the Minimized Display

1. Press the MENU button.

2. Scroll to User Settings and press the Select button.

3. Scroll to Screen Timeout

4. Press the minus (-) button until zero (0) is displayed.

Tabla de contenidos

Otros manuales de Termostato de Trane

Trane

Trane TCONT302 Manual de usuario

Trane

Trane TCONT402AN32DA Instrucciones de montaje

Trane

Trane BAYSTAT150A Manual

Trane

Trane XR202 Manual de usuario

Trane

Trane TZONE940AC52Z Guía de solución de problemas

Trane

Trane TAYSTAT 575 Manual de usuario

Trane

Trane TCONT600AF11MA Manual de usuario

Trane

Trane X39641161-01B Manual del operador

Trane

Trane Comfort Control XB200 Manual de usuario

Trane

Trane BAC-1000 Manual de usuario

Trane

Trane XT500C Manual de usuario

Trane

Trane XT500C Instrucciones de montaje

Trane

Trane THS04 Manual de usuario

Trane

Trane TZEMT500AB32MAA Manual de usuario

Trane

Trane TAYSTAT 370 Manual de usuario

Trane

Trane XL824 Manual de usuario

Trane

Trane XL824 Manual de usuario

Trane

Trane TAYSTAT 540 Manual de usuario

Trane

Trane XL824 Manual de usuario

Trane

Trane XT302C Instrucciones de montaje

Trane

Trane 3518-7064 Manual de usuario

Trane

Trane TCONT800 Series Manual de usuario

Trane

Trane TCONT600AF11MA Manual de usuario

Trane

Trane X13511538-01 Manual del propietario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario