Trane Thermostats Instrucciones de funcionamiento

Thermostats

Standard and Programmable Versions

March 2012 BAS-SVX36C-EN

Installation and

Operation

SAFETY WARNING

Only qualified personnel should install and service the equipment.The installation, starting up, and servicing

of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and

training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or

serious injury. When working on the equipment, observe all precautions in the literature and on the tags,

stickers, and labels that are attached to the equipment.

2 BAS-SVX36C-EN

This document and the information in it are the property ofTrane and may not be used

or reproduced in whole or in part, without the written permission ofTrane.Trane reserves

the right to revise this publication at any time and to make changes to its content without

obligation to notify any person of such revision or change.

Trademarks

Trane and its logo are trademarks ofTrane in the United States and other countries. All

trademarks referenced in this document are the trademarks of their respective owners.

Warnings, Cautions, and Notices

Warnings, cautions, and notices are provided in appropriate places throughout this

document:

WARNING: Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided,

could result in minor or moderate injury. It could also be used to alert against

unsafe practices.

NOTICE:Indicates a situation that could result in equipment or property-

damage-only accidents.

Table of Contents

BAS-SVX36C-EN 3

Introduction ............................................................ 5

Product Features and Capabilities .................................... 6

Dimensions ....................................................... 7

Pre-Installation ......................................................... 9

Location Considerations ............................................ 9

Height Requirements ............................................... 9

Mounting Surfaces ................................................. 9

Maximum Wire Lengths ........................................... 10

Thermostat to HVAC Equipment ................................ 10

Remote Sensor to Programmable Thermostat ..................... 10

Installation ............................................................ 11

Mounting the Back Plate ........................................... 11

Wiring ........................................................... 12

General Practice .............................................. 12

Terminal Identification ........................................ 13

Wiring Diagrams ............................................. 14

1-Heat/1-Cool Thermostat ................................... 14

3-Heat/2-Cool Non-Programmable Thermostat .................. 15

Programmable Thermostat .................................. 19

Replacing the Cover ............................................... 24

Applying Power ................................................... 25

Configuration ......................................................... 26

Operation ............................................................. 33

Icon Descriptions ................................................. 33

Overview of Operation ............................................. 33

Non-Programmable Thermostats ................................... 34

Changing the System Mode .................................... 34

Showing or Changing the Heating or Cooling Temperature Setpoint . . 34

Changing the Fan Mode ....................................... 35

Programmable Thermostats ........................................ 35

Programming ................................................ 35

Setting the Time ........................................... 35

Scheduling ............................................... 36

Day-to-Day Operation ......................................... 39

Showing the Setpoint or Temperature on Display ............... 39

Timed Override (TOV) Mode ................................. 40

Locking or Unlocking Modes ................................ 40

Operational and Programming Reference Information .................... 41

Deadband ........................................................ 41

4 BAS-SVX36C-EN

Heat and Cool Cycling Rate ......................................... 41

Minimum Compressor Off Time .................................... 41

Configuration and Programming Retention ........................... 42

Extended Fan-on Time (Heat or Cool) ................................ 42

Compressor and Auxiliary Heat Lockout ............................. 42

Auxiliary Heat Control ............................................. 42

Economizer/TOD .................................................. 42

Troubleshooting ....................................................... 43

Error Codes ...................................................... 43

System Test Mode ................................................ 43

Troubleshooting Table ............................................. 47

Thermostat Specifications .............................................. 48

BAS-SVX36C-EN 5

Introduction

This document provides installation, operation, and troubleshooting information for threeTrane

models of push-button thermostat:

• TheTrane Programmable 3-Heat/2-CoolThermostat:

– Trane PLM # X13511537-01

– Trane Clarksville part # BAYSTAT150A

– Service parts #THT02774

• TheTrane (non-programmable) 3-Heat/2-CoolThermostat:

– Trane PLM # X13511536-01

– Trane Clarksville part # BAYSTAT155A

– Service parts #THT02773

• TheTrane (non-programmable) 1-Heat/1-CoolThermostat:

– Trane PLM # X13511535-01

– Trane Clarksville part # BAYSTAT151A

– Service parts #THT02772

Note: To identify the thermostat type, locate theTrane PLM # and theTrane PLM #/Trane Clarksville

# on the thermostat circuit board.

The information contained in this document applies to either one or two models or to all.

Differences are noted where appropriate. If no difference between models is noted, assume that

all thermostat models share the information.

6 BAS-SVX36C-EN

Introduction

Product Features and Capabilities

The table below shows the functional differences between the three thermostat models.

Thermostat Function or Feature

1H/1C Thermostat

(p/n X13511535-01)

3H/2C Thermostat

(p/n X13511536-01)

Programmable

Thermostat

(p/n X13511537-01)

A liquid crystal display (LCD) with symbols for temperature, setpoints, and system operating

modes. The programmable thermostat also has day of the week, time of day, and occupancy

settings.

 

System modes: Heat, Cool, Auto, Off. Both types of 3-Heat/2-Cool thermostat also have

Emergency Heat mode.

 

System Configuration Options. See “Configuration,” p. 26 for more information:

• 1-heat/1-cool, conventional  

• 1-heat/1-cool, heat pump without auxiliary heat  

• 1-heat only, conventional without fan  

• 1-heat only, conventional with fan  

• 1-cool, conventional  

• 2-heat/1-cool, heat pump with auxiliary heat  

• 2-heat/2-cool, conventional 

• 2-heat/1-cool, conventional  

• 1-heat/2-cool, conventional  

• 2-heat/2-cool, heat pump without auxiliary heat  

• 3-heat/2-cool, heat pump with auxiliary heat  

A heating and cooling setpoint range of 40ºF to 90ºF (4.5ºC to 32ºC)  

Two fan modes: On, Auto  

Additional configurable options (See “Configuration,” p. 26) 

Terminals and configuration options for a remote temperature sensor. Options include:

• Displaying the remote/outdoor temperature on the LCD 

• Using the remote/outdoor temperature to lockout the compressor or auxiliary heat 

• Using the remote/outdoor temperature instead of the built-in sensor 

Scheduling function with two or four periods per day and the following day/week options:

• 5/2 day schedule: weekdays share a schedule; Saturday and Sunday share a schedule 

• 5/1/1 day schedule: weekdays share a schedule; Saturday and Sunday have their own,

independent schedules



• 1 day schedule: Every day shares the same schedule 

• 7 day schedule: Each day has its own, independent schedule 

Temporary override function with configurable override time limit 

BAS-SVX36C-EN 7

Introduction

Dimensions

Figure 1 and Figure 2 provide dimensions for each type of thermostat.The two non-programmable

thermostats have the same dimensions; the programmable thermostat has slightly different

dimensions.

Figure 1. ProgrammableThermostat Dimensions

3.25 in.

(83 mm)

1.08 in.

(27.5 mm)

4.7 in.

(119 mm)

0.3 in.

(8 mm)

Typ.P Radius 0.08 in. (2 mm)

3.4 in.

(86 mm)

Note: Drawing not to scale. Dimensions within ± 0.02 in. (± 0.5 mm)

Typ. Radius

0.08 in.

(2 mm)

8 BAS-SVX36C-EN

Introduction

Figure 2. 1-Heat/1-Cool or 3-Heat/2-Cool (non-programmable)Thermostat Dimensions

3.07 in.

(78 mm)

1.1 in.

(28 mm)

4.7 in.

(119 mm)

0.3 in.

(8 mm)

Typ.P Radius 0.08 in. (2 mm)

3.4 in.

(86 mm)

Note: Drawing not to scale. Dimensions within ± 0.02 in. (± 0.5 mm)

Typ. Radius

0.08 in.

(2 mm)

BAS-SVX36C-EN 9

Pre-Installation

This section provides the following pre-installation information:

• Location considerations

• Height requirements

• Mounting surfaces

• Maximum wire length

Location Considerations

When selecting a location, avoid the following:

• Areas of direct sunlight

• Areas in the direct airstream of air diffusers

• Exterior walls and other walls that have a temperature differential between the two sides

• Areas that are close to heat sources such as sunlight, appliances, concealed pipes, chimneys,

or other heat-generating equipment

• Drafty areas

• Dead spots behind doors, projection screens, or corners

• Walls that are subject to high vibration

• Areas with high humidity

• High traffic areas (to reduce accidental damage or tampering)

Height Requirements

It is recommended that you mount the back plate a maximum distance of 54 in. (137 cm) above the

floor. If a parallel approach by a person in a wheelchair is required, reduce the maximum height

to 48 inches.

Note: Consult section 4.27.3 of the 2002 Americans with Disability Act guideline, and local building

codes, for further details regarding wheelchair requirements.

Mounting Surfaces

The thermostat can be mounted to any sturdy, vertical surface. Plastic threaded anchors and

M3.5 x 20 mm screws are provided for mounting to plaster or wallboard; 6-32 x 3/4 inch machine

screws are provided for mounting directly to a standard electrical device box. Other fastener

varieties may be required for other surface types.

When replacing a horizontally mounted thermostat and there is an adapter kit available to cover

any opening in the wall. Contact your localTrane office for more information.

10 BAS-SVX36C-EN

Pre-Installation

Maximum Wire Lengths

Thermostat to HVAC Equipment

The thermostat may not function properly if the total resistance of any of the thermostat to HVAC

equipment wires exceeds 2.5 ohms.To ensure that wire length does not cause excess resistance,

refer to Table 1 and ensure that the wires from the thermostat to the HVAC equipment are not too

long.

Remote Sensor to Programmable Thermostat

Because remote temperature sensors measure resistance, very long cable runs can cause slight

errors in the measurement. For the highest temperature reading accuracy, avoid exceeding the

maximum recommended wire lengths shown in Table 2.

Note: For 22 AWG (0.33 mm2) copper wires, the rate of error can be up to 0.5 °F (0.3 °C) per 100 ,

which typically requires wire lengths in excess of 5000 ft (1500 m).

Table 1. Maximum Thermostat to HVAC Equipment Wire Lengths

Copper wire size Maximum recommended wire length

22 AWG (0.33 mm2) 150 ft (46 m)

20 AWG (0.50 mm2) 240 ft (73 m)

18 AWG (0.75 mm2) 385 ft (117 m)

Table 2. Maximum Recommended Remote Sensor Wire Length

Copper wire size

Maximum recommended remote

sensor wire length

22 AWG (0.33 mm2) 1000 ft (300 m)

20 AWG (0.50 mm2) 1500 ft (450 m)

18 AWG (0.75 mm2) 2500 ft (750 m)

Otros manuales para Thermostats

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Termostato de Trane

Trane

Trane XT300C Instrucciones de montaje

Trane

Trane DELUXE programable XT302C Manual de usuario

Trane

Trane TAYSTAT 370 Manual de usuario

Trane

Trane Schlage LiNK TZEMT400BB32MAA Instrucciones de montaje

Trane

Trane TCONT802AS32DA Manual de usuario

Trane

Trane BAC-1000 Manual de usuario

Trane

Trane TZEMT400BB32MMA Manual de usuario

Trane

Trane Link UX360 Manual de usuario

Trane

Trane TCONT302 Manual de usuario

Trane

Trane XR102 Manual de usuario

Trane

Trane THS-02 Manual de usuario

Trane

Trane Comfort Control XB200 Manual de usuario

Trane

Trane TAYSTAT 375 Manual de usuario

Trane

Trane Pivot Smart Manual de usuario

Trane

Trane XL824 Manual de usuario

Trane

Trane ZSASSMAL012 Instrucciones de montaje

Trane

Trane X13511537-01 Manual

Trane

Trane taystat TAYSTAT 570 Manual de usuario

Trane

Trane X39641161-01B Manual del operador

Trane

Trane SENS-IN-1D18-HD60D29-4 Instrucciones de montaje

Trane

Trane Nexia TCONT624AS42DA Manual de usuario

Trane

Trane XT500C Instrucciones de montaje

Trane

Trane TCONT 800 Series Manual de usuario

Trane

Trane TR-SAS908MTW-0-F3 Manual operacional

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario