TPI 285 Manual de usuario

285 Clamp on Meter

Instruction Manual

Table of Contents

Introduction…………………………………………………………………………………………………..3

Safety & Guidelines…………………………………………………………………………………………4

Specifications………………………………………………………………………………………………..5 & 6

Controls & Functions………………………………………………………………………………………..6 & 7

Measuring DC Volts………………………………………………………………………………………...8

Measuring AC Volts…………………………………………………………………………………………8

Measuring Resistance………………………………………………………………………………………9

Measuring Continuity………………………………………………………………………………………..9

Measuring Diodes………………………………………………………………………..…………………10

Measuring Capacitance………………………………………………………………………..…………..10

Measuring Frequency………………………………………………………………………………..……..11

Measuring Temperature…………………………………………………………………………………...11

Measuring DC Microamps…………………………………………………………………………………12

Measuring AC Amperage………………………………………………………………………………….12

Non-Contact Voltage……………………………………………………………………………………….13

Record & Relative Modes………………………………………………………………………………….13

In-Rush Current……………………………………………………………………………………………..14

Range & Function…………………………………………………………………………………………..14

Bluetooth, Hold, Backlight…………………………………………………………………………………14

Temperature Differential……………………………………………………………………………….…..15

Auto Power Off…………………………………………………………………………..…….…….……...15

Default Temperature Units……………………………………………………………………..….………15

Battery Replacement………………………………………………………………………..……….……..15

Cleaning & Storage…………………………………………………………………………..…………….15

Introduction

Thank you for purchasing TPI products. The 285 is easy to use and built to last. It is backed by a three

year limited warranty. Please visit www.testproductsintl.com to register your meter.

Product Description

The slim design 285 is a hand-held, auto ranging clamp-on DMM with Bluetooth output for use with the

TPI View app. Backlit dual display, True RMS response, Frequency with Duty Cycle, Min/Max/Avg,

Temperature, Inrush Current measurement, Capacitance, DC microamps, and Non-Contact Voltage

detection are just a few of the features of the 285.

The TPI View app can be used in conjunction with the 285 to store measurements to jobs, create and

email test reports, view live readings from a safe distance, or print measurements to the optional A711BT

printer.

Contents

The 285 comes complete with the following accessories:

Carrying Pouch

Test Lead Set

Temperature Probe

Instruction Manual

Battery & Fuse

TPI View App

The TPI View app is available for Android and iOS devices. Visit the Play Store or the App Store to

download and use the View app on your smart device.

Use the QR code below to find the TPI View app:

Safety

Please follow manufacturers test procedures whenever possible. Do not

attempt to measure unknown voltages or components until a complete

understanding of the circuit is obtained.

Veuillez suivre les procédures de test des fabricants dans la mesure du

possible. N'essayez pas de mesurer des tensions ou des composants

inconnus jusqu'à ce qu'une compréhension complète du circuit soit obtenue.

Read instructions before operating:

Be sure these instructions accompany the tool when passed from one user to a new or

inexperienced user.

If test equipment is used in a manner not specified by the manufacturer, the protection provided

by the equipment may be impaired.

GENERAL GUIDELINES

ALWAYS

•

Test the 285 before using it to make sure it is operating properly.

•

Inspect the test leads before using to make sure there are no breaks or shorts.

•

Double check all connections before testing.

•

Have someone check on you periodically if working alone.

•

Have a complete understanding of the circuit being measured.

•

Disconnect power to circuit, then connect test leads to the 285, then to circuit being measured.

NEVER

•

Attempt to measure unknown high voltages.

•

Attempt to measure DC microamps with the meter in parallel to the circuit.

•

Connect the test leads to a live circuit before setting up the instrument.

•

Touch any exposed metal part of the test lead assembly.

CONTENTS

•

285 Instrument

•

Test Lead Set

•

Temperature Probe (K-type) and input adapter

•

Instruction Manual

WARNING

ATTENTION

Specifications

ACV (45Hz ~ 450Hz)

Range

Res.

Accuracy

Impedance

0.001V

+/- (1.2% + 3 digits)

10MΩ

60V

0.01V

600V

0.1V

+/- (1.5% + 3 digits)

750V

DCV

Range

Res.

Accuracy

Impedance

0.001V

+/- (0.5% + 2 digits)

10MΩ

60V

0.01V

600V

0.1V

1000V

ACA (Measured with Clamp) (45Hz ~ 450Hz)

Range

Res.

Accuracy

Protection

60A

0.01A

+/- (3% + 10 digits)

600A AC Max

600A

0.1A

+/- (3% + 5 digits)

Accuracy is with conductor centered in jaw within +/-

5% of center

DCuA (DC Microamps measured with test leads)

Range

Res.

Accuracy

Protection

60uA

0.01uA

+/- (1% + 2 digits)

1.2kΩ / PTC

protected (self-

resettable)

600uA

0.1uA

Resistance (Ω)

Range

Res.

Accuracy

Protection

600Ω

0.1Ω

+/- (1.0% + 5 digits)

600VDC /

600VAC

Peak

6kΩ

0.001kΩ

+/- (1.0% + 2 digits)

60kΩ

0.01kΩ

600kΩ

0.1kΩ

6MΩ

0.001MΩ

+/- (3.0% + 5 digits)

60MΩ

0.01MΩ

+/- (3.0% + 10 digits)

Diode

Test

Voltage

Test

Current

Description

Protection

≈ 2.6V

≈ 1mA

Measures

approximate forward

bias of diode. Also

beeps when shorted.

600V Peak

Continuity

Threshold to audible beep

Protection

Approximately < 7Ω

600V Peak

Capacitance

Range

Res.

Accuracy

Protection

6nF

0.001nF

+/- (5.0% + 20 digits)

600VDC /

600VAC

Peak

60nF

0.01nF

+/- (3.0% + 5 digits)

600nF

0.1nF

6uF

0.001uF

60uF

0.01uF

600uF

0.1uF

6mF

0.001mF

+/- (7.0% + 10 digits)

60mF

0.01mF

+/- (10.0% + 20 digits)

Frequency

Range

Res.

Accuracy

Protection

60Hz

0.01Hz

+/- (0.5% + 2

digits)

600VDC /

600VAC Peak

600Hz

0.1Hz

6kHz

0.001kHz

60kHz

0.01kHz

600kHz

0.1kHz

6MHz

0.001MHz

Duty Cycle

Range

Res.

Accuracy

Protection

5% to 95%

(<600Hz)

0.1%

+/- (1.0% + 2 digits)

600VDC /

600VAC Peak

10% to 90%

(600 to

6kHz)

20% to 80%

(6kHz to

60kHz)

Temperature

Range

Res.

Accuracy

Protection

-49.9 to -0.1°C

0.1°C

+/- (2.0% + 3°C)

600VDC /

600VAC

Peak

0.0 to 99.9°C

+/- (1.0% + 1°C)

100°C to 999°C

1°C

+/- (1.0% + 2°C)

-57.9 to 31.9°F

0.1°F

+/- (2.0% + 5.4°F)

32.0 to 211.9°F

+/- (1.0% + 1.8°F)

212 to 1830°F

1°F

+/- (1.0% + 4°F)

Non-Contact Voltage

Detects AC voltage greater than 50V. Audible and visual

indication.

Controls and Functions

Jaw – Used to measure AC Amperage. Place single current

carrying wire in the middle of the jaw.

Jaw Lever – Used to open the jaw.

LCD – Measured readings display

Keypad – Used to select different modes of operation.

Input Jacks – Test lead connection points.

Rotary Switch – Used to select the measurement function.

NCV Switch – Used to activate non-contact voltage detection.

Jaw

Lever

NCV

Switch

Rotary

Switch

LCD

Keypad

Input

Jacks

General Specifications

Display

6000 count dual display LCD

with backlight

Max Voltage between

input terminal and

ground

1000VDC / 750VAC

Operating Temperature 32°F to 113°F (0°C to 40°C)

Storage Temperature -4°F to 140°F (-20°C to 60°C)

Relative Humidity 80% non-condensing

Altitude

6,562 feet maximum

(2,000 meters maximum)

IP Rating IPX0 per IEC 60529

Battery Type 9V Alkaline (NEDA 1604)

Battery Life

Approximately 90hrs (no

backlight or Bluetooth)

Size

9.9” x 2.5” x 1.4” (252mm x

64mm x 36mm)

Weight 0.79 lb (358g)

Bluetooth LE 4.2

International Symbols

: Dangerous Voltage

: DC (Direct Current)

: AC (Alternating Current)

: Warning

: Ground

: Double Insulation

: Either DC or AC

Agency

FCC ID: QOQBGM113

209-J00204

IC (Industry Canada) ID: 5123A-BGM113

IEC 61010-1 Over voltage:

CAT III 750

Vac/1000Vdc

CAT IV 600Vac/dc

Pollution Degree 2

UL 61010-1

CAT III 750

Vac/1000Vdc

CAT IV 600Vac/dc

LCD Display

Sub

Display:

Secondary

measured

values

display for

some

functions

Main

Display:

Measured

Values

display

area

Not all icons shown are used with the 285

Unique Icons

Auto Power Off is active. Instrument powers off after

15 minutes of inactivity. This feature can be disabled.

Please refer to page 15.

Low battery indicator. When on, battery should be

changed. If battery voltage drops too low, operation will

be affected.

Indicates a voltage over 30V AC or DC is being

measured. Extra caution should be taken when

measuring higher voltages or injury may occur.

Blinks when Bluetooth is on and ready for pairing to the

View app. Indicator stay on continuously when

connected to smart device.

Keypad Push Buttons

Relative – Once pressed, the reading on the display is

stored and used as reference in the main display.

Subsequent readings are in the sub display and

relative to this stored value.

Hold/Backlight – Press to freeze/unfreeze the display.

Press and hold to activate the backlight.

Range – Toggles between manual and auto range.

Press to switch to manual range then press

repeatedly to select the range. Press and hold to

return to Auto Range (AT in lower left of display).

Record – Activates record mode. Repeatedly pressing

REC cycles through maximum, minimum, and

average readings (shown in main display). Sub

display shows current reading. Press and hold to

disable Record mode.

Inrush/BT – Press to turn Inrush Current capture on

and off. Press and hold to turn Bluetooth on and off.

Function – Use to select the gray functions on the

rotary switch. Also used to set default temperature

units and to enable or disable auto power off. See

page 15.

Rotary Switch

Measurement function selector

DC / AC Voltage

Continuity Buzzer / Resistance

Diode

Capacitance

Frequency

Temperature

Microamps DC using test leads

AC Amperage using the jaw

Input Jacks

Test Lead Connections

Black test lead connection for

measuring AC/DC volts, Continuity

Buzzer, Resistance, Diode Test,

Capacitance, Frequency,

Temperature, and DC Microamps.

Red test lead connection for

measuring AC/DC volts, Continuity

Buzzer, Resistance, Diode Test,

Capacitance, Frequency,

Temperature, and DC Microamps.

Measuring DC Volts

Range: 0 to 1000VDC

Warning!

Do not attempt to make a voltage measurement of more

than 1000VDC or of a voltage level that is unknown.

Rotary Switch Position

Test Lead Connection

COM – Black Test Lead

VΩHz – Red Test Lead

Optional Functions

Relative – Displays measured value as difference of

referenced value.

Hold/Backlight – Press to freeze/unfreeze the

display. Press and hold to activate the backlight.

Range – Toggles between manual and auto range.

Press to switch to manual range then press

repeatedly to select the range. Press and hold to

return to Auto Range (AT in lower left of display).

Record – Activates record mode. Repeatedly

pressing REC cycles through maximum, minimum,

and average readings (shown in main display). Sub

display shows current reading. Press and hold to

disable Record mode.

Inrush/BT –Press and hold to turn Bluetooth on

and off.

Measuring AC Voltage

Range: 0 to 750VAC

Warning!

Do not attempt to make a voltage measurement of more

than 750VAC or of a voltage level that is unknown.

Rotary Switch Position

Test Lead Connection

COM – Black Test Lead

VΩHz – Red Test Lead

Selecting AC Mode

Press the function key to select AC Volts. The

ACV annunciator will illuminate and

Frequency will be seen in the sub display.

Optional Functions

Relative – Displays measured value as difference of

referenced value.

Hold/Backlight – Press to freeze/unfreeze the

display. Press and hold to activate the backlight.

Range – Toggles between manual and auto range.

Press to switch to manual range then press

repeatedly to select the range. Press and hold to

return to Auto Range (AT in lower left of display).

Record – Activates record mode. Repeatedly

pressing REC cycles through maximum, minimum,

and average readings (shown in main display). Sub

display shows current reading. Press and hold to

disable Record mode.

Inrush/BT –Press and hold to turn Bluetooth on

and off.

Measuring Continuity

Range: Buzzer sounds at <7Ω

Warning!

Do not attempt to make a continuity measurement with

the circuit energized.

Rotary Switch Position

Test Lead Connection

COM – Black Test Lead

VΩHz – Red Test Lead

Function - Press the function key to select

Continuity mode. The continuity annunciator

will illuminate in the display.

Optional Functions

Relative – Displays measured value as

difference of referenced value.

Hold/Backlight – Press to freeze/unfreeze the

display. Press and hold to activate the

backlight.

Inrush/BT –Press and hold to turn

Bluetooth on and off.

Measuring Resistance (Ohms)

Range: 0 to 60MΩ

Warning!

Do not attempt to make resistance measurements with

the circuit energized. For best results, remove the resistor

from the circuit before attempting to measure it.

Rotary Switch Position

Test Lead Connection

COM – Black Test Lead

VΩHz – Red Test Lead

Note: To make accurate low resistance measurements,

short the leads together and press the REL key. This

value, the test lead resistance, will be deducted from

measured readings.

Optional Functions

Relative – Displays measured value as difference

of referenced value.

Hold/Backlight – Press to freeze/unfreeze the

display. Press and hold to activate the backlight.

Range – Toggles between manual and auto range.

Press to switch to manual range then press

repeatedly to select the range. Press and hold to

return to Auto Range (AT in lower left of display).

Inrush/BT –Press and hold to turn Bluetooth

on and off.

Measuring Capacitance

Range: 0 to 60mF

Warning!

Do not attempt to make capacitance measurements with

the circuit energized. Remove the capacitor from the

circuit and make sure it is de-energized before making a

measurement.

Rotary Switch Position

Test Lead Connection

COM – Black Test Lead

VΩHz – Red Test Lead

Optional Functions

Relative – Displays measured value as difference of

referenced value.

Hold/Backlight – Press to freeze/unfreeze the

display. Press and hold to activate the backlight.

Range – Toggles between manual and auto range.

Press to switch to manual range then press

repeatedly to select the range. Press and hold to

return to Auto Range (AT in lower left of display).

Record – Activates record mode. Repeatedly

pressing REC cycles through maximum, minimum,

and average readings (shown in main display). Sub

display shows current reading. Press and hold to

disable Record mode.

Inrush/BT –Press and hold to turn Bluetooth on

and off.

Measuring Diodes

Range: Approximate forward bias voltage of diode

Warning!

Do not attempt to make diode measurements with the

circuit energized. For best results, remove the resistor

from the circuit before attempting to measure it.

Rotary Switch Position

Test Lead Connection

COM – Black Test Lead

VΩHz – Red Test Lead

Note: Continuity buzzer will sound if a resistance under

approximately 7 Ohms is measured.

Optional Functions

Relative – Displays measured value as

difference of referenced value.

Hold/Backlight – Press to freeze/unfreeze the

display. Press and hold to activate the

backlight.

Inrush/BT –Press and hold to turn

Bluetooth on and off.

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario