TP-Link TL-WA801ND Manual de usuario



Note If the LEDs display abnormally, please check to see if all the cable

connectors (power adapter and Ethernet cable) are well connected to your

device.

Connect to the Access Point with

the Ethernet cable or via wireless.

The default SSID of the Access

Point is TP-LINK_ XXXXXX. The

XXXXXX is the last 6 characters

of the Access Point’s MAC

address.

Plug the provided power adapter

into the power jack on the back of

the Access Point, and the other

end to a standard electrical wall

socket. Then press the QP1QHH

button to power on the device.

Turn on all of your network devices and then check to see if the LEDs on the

Access Point display normally as the diagram below describes.

Note If the distance between the outlet and the Access Point is too long to supply

the power, you can refer to the Power over Ethernet (PoE) solution in

Crrgpfkz"C<"Ykvj"RqG"Ugvwr on rcig"350

Uqnkf"nkijv"

Hncujkpi"

Uqnkf"nkijv"qt"hncujkpi"

Hncujkpi" kh" vjg" Yktgnguu"

Tcfkq"hwpevkqp"ku"gpcdngf

" Nqikp

Yktgnguu"Ugvvkpiu"

dialog box will prompt you for the

Wugt" pcog and Rcuuyqtf.Ente

the default values and click QM.

Note If the dialog box does not pop up, please refer to V5 in Vtqwdngujqqvkpi"on

rcig"32"to assign a static IP address 192.168.0.100 for your computer. V4

will give you some help if you forget the password.

Wugt"pcog<"cfokp"

Rcuuyqtf<"cfokp"

Click QM"

fter successfully logging in, the

Quick Setup page will display.

Open your web browser, type in

3;4038:020476 in the address

bar and press Gpvgt.

Click Pgzv"

Note If you click Gzkv and choose to manually configure the AP on your own need,

please note that the DHCP is enabled during the configuration, it is essential

to disable DHCP when all the settings are finished.

C0"Ceeguu"Rqkpv"Oqfg"

Kpvtqfwevkqp"

In this mode, the product will act as a wireless central hub for your wireless LAN

clients, giving a wireless extension for your current wired network.

Ugvvkpiu"

For Ceeguu"Rqkpv"mode, please refer to part C"qp"rcig"5.

For Tgrgcvgt*Tcpig"Gzvgpfgt+"mode, please refer to part D"qp"rcig"6.

For Dtkfig"ykvj"CR"mode, please refer to part E"qp"rcig"7.

For Enkgpv mode, please refer to part F"qp"rcig"8.

For Ownvk/UUKF"mode, please refer to part G"qp"rcig"9.

The Operation Mode page will appear then. The TL-WA801ND supports up to five

operation modes. You can refer to the HELP page to know more about the five

modes.

Select the operation mode

based on your need."

Click Pgzv"

1. Create an easy-to-remember name for your wireless network here.

2. Select Tgikqp and Ejcppgn for your device.

3. Select Oquv"Ugewtg"*YRC1YRC4/RUM+ mode and enter a wireless password

below to prevent unauthorized access to your AP.

After the settings above, please go to Pgvyqtm"Ugvvkpiu on rcig":"to continue

the configuration.

D0"Tgrgcvgt"*Tcpig"Gzvgpfgt+"Oqfg"

Kpvtqfwevkqp"

In this mode, the product can extend the coverage of another wireless Access Point

or Router. The universal repeater mode is for the wireless Access Point or Router

which does not support WDS function.

Ugvvkpiu"

The window displaying a list of available SSIDs will appear.

Select the repeater mode, for

example Universal Repeater.

Click Uwtxg{"

Find the SSID of the root

Access Point / Router that you

want to repeat, and then click"

Eqppgev in the corresponding

You will then return to the previous page.

After the settings above, please go to Pgvyqtm"Ugvvkpiu on rcig": to continue

the configuration.

E0"Dtkfig"ykvj"CR"oqfg"

Kpvtqfwevkqp"

In this mode, the product can wirelessly connect two or more remote LANs together.

Ugvvkpiu"

The security mode will be

selected automatically,

please confirm it and enter

the password that is the

same as on your router or

access

oint."

Click Pgzv"

Note The setup for YFU"Tgrgcvgt mode is similar to that of Wpkxgtucn Tgrgcvgt

mode.

Click Uwtxg{"

The window displaying a list of available SSIDs will appear.

You will then return to the previous page.

After the settings above, please go to Pgvyqtm"Ugvvkpiu on rcig": to continue

the configuration.

F0"Enkgpv"Oqfg"

Kpvtqfwevkqp"

In this mode, the product will act as a wireless adapter to connect your wired devices

(e.g. PC, Xbox, PS3, etc. ) to a wireless network.

Find the SSID of the root

Access Point / Router that you

want to bridge, and then click"

Eqppgev in the corresponding

Click Pgzv"

Create a name for the Local

Wireless Network."

The security mode will be

selected automatically,

please confirm it and enter

the password that is the

same as on the remote AP."

Ugvvkpiu"

The window displaying a list of available SSIDs will appear.

You will then return to the previous page.

After the settings above, please go to Pgvyqtm"Ugvvkpiu on rcig":"to continue

the configuration.

G0"Ownvk/UUKF"Oqfg"

Kpvtqfwevkqp"

In this mode, the product can be assigned up to four SSIDs to work with your VLAN.

Click Uwtxg{"

Find the SSID of the Access

Point / Router or WISP, and

click Eqppgev in the

corres

ondin

row.

Click Pgzv"

Select the security mode and

enter the password that is the

same as on the root AP."

Ugvvkpiu"

After the settings above, please go to Pgvyqtm"Ugvvkpiu on rcig":"to continue

the configuration.

Pgvyqtm"Ugvvkpiu"

Note For advanced configurations on this page, please refer to the User Guide on

the Resource CD.

Click Pgzv"

The Network Setting

page will appear then. It

is recommended that

you keep the default

settings on this page.

Note For the configuration of VLAN, please refer to the User Guide on the

Resource CD.

Click Pgzv"

You can create up to 4

SSIDs and rename them

here."

Configure the wireless

security for each SSID here.

Click Ucxg to apply the

current security settings for

the selected SSID.

Select Tgikqp and Ejcppgn.

Hkpkuj"

Congratulations! You have completed the setup.

Click QM"

Click Hkpkuj"

Check your settings and click

Ucxg to save your settings for

future reference."

Wait until the device

restarts successfully.

After Network Settings,

the Finish page will

appear. Here takes the

settings for Access Point

mode for example.

V30"Jqy"fq"K"tguvqtg"o{"Ceeguu"Rqkpv‚u"eqphkiwtcvkqp"vq"kvu"hcevqt{"fghcwnv"ugvvkpiuA

V40" Yjcv"ecp"K"fq"kh"K"hqtigv"o{"rcuuyqtfA"

1) Try to use the default user name and password: cfokp, cfokp;

2) Referring to the file that you have saved in Hkpkuj last time you configured

the device, the file will show you the user name and password that you have

configured.

3) If the password is still not the correct one, then you can try to restore the Access

Point’s configuration to its factory default settings referring to previous section

V3 and try to reconfigure your AP by following the instructions of this QIG.

V50"Yjcv"ecp"K"fq"kh"K"ecppqv"ceeguu"vjg"ygd/dcugf"eqphkiwtcvkqp"rcigA"

Assign a static IP address 192.168.0.100 for your computer first before logging in the

management page. Here takes the procedures in Windows 7 for example."

With the Access Point powered on,

use a pin to press and hold the

TGUGV button on the rear panel for

5 to 8 seconds before releasing it.

Once the Access Point is reset, the current configuration settings will be lost

and you will need to reconfigure the Access Point.

Note

Go to Uvctv"> Ugvvkpiu > Eqpvtqn"

Rcpgn, and then you will see the

following page.

Click"Xkgy"pgvyqtm"

uvcvwu"cpf"vcumu"

Hold it in for 5 to 8 seconds

Otros manuales para TL-WA801ND

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de TP-Link

TP-Link

TP-Link Auranet EAP330 Manual de usuario

TP-Link

TP-Link Pharos CPE210 Manual de usuario

TP-Link

TP-Link TL-WA1201 Manual de usuario

TP-Link

TP-Link Auranet EAP115 Manual de usuario

TP-Link

TP-Link TL-WA901ND Manual de usuario

TP-Link

TP-Link TL-WA1201 Manual de usuario

TP-Link

TP-Link TL-WA801ND Manual de usuario

TP-Link

TP-Link TL-WA601G Manual de usuario

TP-Link

TP-Link Pharos CPE210 Manual de usuario

TP-Link

TP-Link TL-WA901ND Manual de usuario

TP-Link

TP-Link Omada EAP653 Manual de usuario

TP-Link

TP-Link AURANET CAP300-Outdoor Manual de usuario

TP-Link

TP-Link Auranet EAP110 Manual de usuario

TP-Link

TP-Link Omada Manual de usuario

TP-Link

TP-Link 6935364097752 Manual de usuario

TP-Link

TP-Link Deco Manual de usuario

TP-Link

TP-Link Omada EAP225-Wall Manual de usuario

TP-Link

TP-Link Auranet EAP110 Manual de usuario

TP-Link

TP-Link TL-WA5210G Manual de usuario

TP-Link

TP-Link TL-WA901ND Manual de usuario

TP-Link

TP-Link Omada Pro Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

TP-Link

TP-Link AP300 Manual de usuario

TP-Link

TP-Link Omada EAP225 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario