TP-Link HS200 Manual de usuario
User’s Manual
HS200
1910011729 REV 1.0.0
Smart Wi-Fi Light Switch
Copyright & Trademarks
Specications are subject to change without notice. is
a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other
brands and product names are trademarks or registered trademarks
of their respective holders.
No part of the specications may be reproduced in any form or
by any means or used to make any derivative such as translation,
transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD.
Apple and App Store are trademarks of Apple Inc., registered in the
U.S. and other countries.
Android and the Google Play logo are trademarks of Google Inc.
© 2016 TP-LINK. All rights reserved.
www.tp-link.com
5 Introduction
7 Product Requirements
7 Smart Wi-Fi Light Switch Installation
10 Using Kasa with Smart Switch
10 Kasa Account
11 Customizing Smart Switches
13 Scheduling
14 Creating Scenes
15 Away Mode
17 Energy Monitoring
18 Maintaining the Smart Switches
18 Firmware Update
19 Resetting
21 Troubleshooting
21 Frequently Asked Questions
22 Usage Tips
23 Support
24 Specications
24 Limited Warranty
Contents
5www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Introduction
TP-LINK Smart Wi-Fi Light Switch is a standard,
single-pole, wall light switch that can be controlled via
your iOS or Android devices. Along with the TP-LINK
Kasa mobile app, you can follow an intuitive wiring
instructions provided to replace your standard in-
wall switch, connect the Smart Switch to your home
network, then control your lights and create custom
lighting automations from anywhere, at anytime with an
Internet connection.
The Smart Switch is compatible with incandescent,
LED, Halogen, and compact uorescent light
bulbs. The switch also includes a white backlight
LED indicator to easily locate the switch at night.
6www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Blinking Amber and Green: App-
Cong mode initiated.
Green: Successfully connected to
the Wi-Fi network.
Blinking Amber: Resetting or during
rmware update.
Red: No Wi-Fi connection.
White: Lit up when the light is
switched OFF to show the Smart
Switch location in the dark.
Press to reboot the Smart Switch.
Press and hold (about 5 seconds)
until the Wi-Fi status LED blinks
amber and green alternately to
initiate App-Cong mode.
Press and hold (about 10 seconds)
until the Wi-Fi status LED blinks
green rapidly to factory reset the
Smart Switch.
RESET
RESTART
7www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Product Requirements
• In-wall installation with hardwired connections.
• A smartphone or tablet running iOS 8 and up or
Android 4.0 and up.
• A Wi-Fi connection (supports 802.11b/g/n
standard).
Smart Wi-Fi Light Switch Installation
Important Safety Information
Before installing, servicing, or removing the Smart
Switch, read and follow all safety precautions, including
the following:
• WARNING: RISK OF ELECTRIC SHOCK OR FIRE.
Turn OFF power supply at the circuit breaker or
fuse. Use a noncontact voltage tester to ensure the
power is off.
• The Smart Switch must be installed and used in
accordance with the National Electric Code (NEC)
or your local electrical code. If you are unfamiliar
with these codes and requirements, or are
uncomfortable performing the installation, consult
8www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
a qualied electrician.
• The Smart Switch is an indoor single-pole switch
that requires a neutral connection.
• Do not install the Smart Switch with wet hands or
when standing on wet or damp surfaces.
1 Download TP-LINK Kasa from App Store or Google
Play.
OR
Scan QR
code
2 Connect mobile device to your 2.4GHz Wi-Fi
network.
Note: The Smart Switch only supports 2.4GHz
networks.
9www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
3 Lauch Kasa and follow the wiring steps provided,
then connect the Smart Switch to your home
network.
Sketch 9:41 AM 100%
Before we start
Have you already wired up your
Smart Switch?
NOT YE T
Yes, I have
Log in to access your devices.
Welcome
home
Sketch 9:41 AM 100% Sketch 9:41 AM 100%
Start the con guration
Locate the reset button below the
switch on the left.
NEXT
Press and hold for 5 seconds until the
Wi-Fi light blinks amber and green.
RESE T
10www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Using Kasa with Smart Switch
Kasa Account
While you don’t have to have a Kasa account to use TP-
LINK Smart Home devices, signing up for an account
provides added functionality such as:
• Synchronization of settings and congurations to
all your mobile devices.
• Ability to control and congure the devices from
outside your home.
• Use of third-party services and products such as
Amazon Echo.
Devices can only be associated with one Kasa account.
To remove the association, turn off Remote Control in
the Kasa’s settings, or factory reset the device.
After creating your Kasa account, you will need to verify
the email associated with your account by clicking a
link in an email that Kasa sends you. Until you verify the
email, much of the above functionality will not work.
Otros manuales para HS200
6
Tabla de contenidos
Otros manuales de Cambiar de TP-Link
TP-Link
TP-Link TL-SF1008D Manual de usuario
TP-Link
TP-Link Tapo S220 Manual de usuario
TP-Link
TP-Link TL-SL5428 Manual de usuario
TP-Link
TP-Link JetStream TL-SG3216 Manual de usuario
TP-Link
TP-Link TL-SF1005P Manual de usuario
TP-Link
TP-Link TL-SG3210 Manual de usuario
TP-Link
TP-Link UH720 Manual de usuario
TP-Link
TP-Link TL-SF1008P Manual de instrucciones de instalación
TP-Link
TP-Link TL-SF1008P Manual de usuario
TP-Link
TP-Link TL-POE150S Manual de usuario
TP-Link
TP-Link TL-SX1008 Manual de usuario
TP-Link
TP-Link JetStream TL-SG3424 Manual de usuario
TP-Link
TP-Link TL-SG105E Manual de usuario
TP-Link
TP-Link JetStream TL-SL5428E Manual de instrucciones
TP-Link
TP-Link TL-SG105-M2 V2 Manual de usuario
TP-Link
TP-Link UH400 Manual de usuario
TP-Link
TP-Link TL-SG105 Manual de usuario
TP-Link
TP-Link T1700G-28TQ Manual de usuario
TP-Link
TP-Link TL-SG105 Manual de usuario
TP-Link
TP-Link JetStream TL-SG2008 Manual de usuario
