TP-Link Tapo C100 Manual de usuario
User Guide
Home Security Wi-Fi Camera
Tapo C100
© 2021 TP-Link 1910013029 REV2.0.0
Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Appearance ······························································· 3
Set Up Your Camera·············································· 4
Main Camera Controls········································· 6
Motion Detection···················································· 8
24-hour Recordings············································12
Privacy Mode ··························································14
Authentication························································15
1
About This Guide
This guide provides a brief introduction to the Home Security Wi-Fi Camera and the Tapo app, as well as regulatory information.
Please note that features available of the Tapo smart camera may vary by model and software version. The availability may also vary by region. All
images, steps, and descriptions in this guide are only examples and may not reect your actual experience.
Conventions
In this guide, the following convention is used:
Convention Description
Blue Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
More Info
• Specications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
• The setup video can be found at https://www.tp-link.com/support/setup-video/#cloud-cameras.
2
Introduction
When you are away home, there are always something you care about. Tapo C100 helps you receive a notication whenever your camera detects
movement and check it in detail through the Tapo app. Also, you can personalize your security by setting motion detection zones to only notify you of
what happens in areas that you choose.
• 1080p High-Denition – Provides greater sharpness and clarity.
• Night Vision – Provides a visual distance of up to 30 ft in total darkness.
• Live View – Always keep an eye on what matters most to you—anytime, anywhere.
• Two-Way Audio – Communicate in real time through a built-in microphone and speaker.
• Alarm System – Triggers lights and sounds as an alarm when motion is detected.
• Privacy Mode - Temporarily shut down surveillance with a tap in the app.
• Sharing - Share interesting and funny videos to everyone on social media.
• Easy Setup - Follow in-app instructions to easily set up within minutes.
• Local Storage – Store up to 128 GB of video on a microSD card†, equal to 384 hours (16 days) of footage△.
†The SD card is not provided. △The data comes from TP-Link laboratory.
3
Appearance
The Home Security Wi-Fi Camera has a system LED that changes color according to its status, an alert light, lens, microphone, DC power port, RESET
button and a microSD card slot. Refer below for details.
microSD Card Slot
Insert a microSD card and initialize it on the
app for local recording.
System LED
• Solid red: Starting up
• Blinking red and green: Ready for setup
• Blinking red slowly: Connecting to Wi-Fi
• Solid amber: Connected to Wi-Fi
• Solid green:
Connected to TP-Link Cloud server
• Blinking red quickly: Camera resetting
• Blinking green quickly: Camera updating
RESET Button
Press and hold for at least 5 seconds until
the LED blinks red to reset your camera.
Alert Light
Blinks to alert you when the
activity detected.
DC Power Port
Connect the power cord provided.
Lens
Microphone
Built-in internal microphone.
Note: Do NOT insert objects into the hole.
4
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download App
Get the Tapo app from the App Store or
Google Play, or by scanning the QR code
below.
OR
Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don't have an account, create one rst.
Step 3. Add Your Camera
Tap the button in the app and select your
model.
5
Step 4. Congure Camera
Follow app instructions to configure your
camera and add it to your home network.
Step 5. Place Camera
Place your camera on a at surface, or install it on a wall or ceiling with the provided
mounting screws.
1. Mark Position
Place the mounting template where you want
the camera.
For wall mounting, drill two holes through two
circles.
2. Mount Base
Ax two mounting screws with the help of
mounting template.
For wall mounting, insert two anchors into holes
and screw the screws into the anchors.
3. Secure Camera
Hang your camera on the screws.
6
Home Page
This page lists all your cameras you've added and you can view them
directly and manage them easily. Tap the camera or go to Camera
Preview > Manage to enter the Live View page.
Main Camera Controls
After you successfully set up the camera, you will see your camera listed on the home page. You can view and manage your camera from anywhere at
any time with the Tapo app.
Live View
Tap Talk or Voice Call to communicate with loved ones, turn on Alarm
to get noticed when motion detected, enable the Privacy Mode to
temporarily shut down the surveillance for privacy, or go to Playback &
Memory to check all recordings and saved moments.
Multi-Screen
View live videos from
multiple cameras at
the same time
Screenshot
Full Screen
Volume
Record
Camera Settings
Day/Night Mode
7
Camera Settings
On Live View page, tap to enter the Camera Settings page. You can
change the settings of your camera to meet various needs, such as
change your camera name, customize detection settings and recording
schedules, turn on or o notications, set activity zones, etc.
Me
On this page, you can edit your account, quickly check the memorable
moments you saved, or nd the FAQs of using smart camera and basic
info related to the Tapo app.
Camera Memory
Photos and videos
you took will appear
here
Device Sharing
Share your Tapo
devices to your family
members to manage
devices together
Camera Preferences
You can choose to display
the Live or Speed tag on
the screen for all your
Tapo cameras
Voice Control
Set up connections with
third-party services
to control your Tapo
devices by voice
Account Info
Change your avata,
edit your name, or
modify the password
8
1. Go to Camera Settings page and tap Detection & Alerts to customize
its current detection settings.
2. On the Detection & Alerts page, enable the Motion Detection
function. It's recommended to enable the Notications function to
receive motion detection messages.
Motion Detection
With motion detection, the Tapo app alerts you of activity that matters and sends notications straight to you when motion detected.
Insert a microSD card to record the clips when motion detected. Otherwise, you can only receive the notications.
Note: Initialize the SD card on the app before using it.
Otros manuales para Tapo C100
3
Tabla de contenidos
Otros manuales de Cámara de seguridad de TP-Link
TP-Link
TP-Link VIGI C340HPWSM Manual de usuario
TP-Link
TP-Link TL-SC3430 Manual de usuario
TP-Link
TP-Link Tapo C212 Manual de usuario
TP-Link
TP-Link tapo C500 Manual de usuario
TP-Link
TP-Link NC220 Manual de usuario
TP-Link
TP-Link VIGI C400HP V2 Manual de usuario
TP-Link
TP-Link kasa KC410S Manual de usuario
TP-Link
TP-Link Tapo C320WS Manual de usuario
TP-Link
TP-Link Tapo C100 Manual de usuario
TP-Link
TP-Link tapo C125 Manual de usuario
TP-Link
TP-Link NC260 Manual de usuario
TP-Link
TP-Link Tapo Camera Manual de usuario
TP-Link
TP-Link Tapo C210 Manual de usuario
TP-Link
TP-Link TL-SC4171G Manual de usuario
TP-Link
TP-Link TL-SC3230N Manual de usuario
TP-Link
TP-Link Kasa Smart KC300 Manual de usuario
TP-Link
TP-Link Kasa Spot Pan Tilt Manual de usuario
TP-Link
TP-Link TL-SC3171G Manual de usuario
TP-Link
TP-Link Tapo C520WS Manual de usuario
TP-Link
TP-Link Tapo C225 Manual de usuario
