TP-Link Kasa Smart KC300 Manual de usuario
User Guide
Kasa Wire-Free Camera
1910012702 REV1.1.0
Contents
About This Guide ··························································1
Introduction ·····································································2
Appearance ·····································································3
Set Up Your Camera····················································5
View Your Camera ························································7
Congure Your Camera·············································8
Check Activity Notications ···································9
Work with Other Smart Home Products ·······10
Authentication·····························································11
1
About This Guide
This guide provides a brief introduction to the Indoor/Outdoor Security Camera System and the Kasa app, as well as regulatory information.
Please note that features of the product may vary slightly depending on the model and software version you have, and on your location, language and
internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention Description
Camera Stands for Kasa Smart Wire-Free Camera.
Hub Stands for Kasa Smart Camera Hub.
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.
2
Introduction
An Indoor/Outdoor Security Camera System generally includes one Kasa Smart Camera Hub and one or more Kasa Smart Wire-Free Cameras.
The Kasa Smart Wire-Free Camera monitors anywhere and everywhere. Monitor live video and recordings directly on the Kasa Smart app from the
convenience of your smartphone. The Kasa Smart Camera Hub adds a layer of security with a siren, alert and audio recordings to mimic occupancy.
Your home is always protected.
• Night Vision
At night, the camera will detect activity up to 25 ft. away with night vision.
• Wired or Wire-free
A camera that gives you freedom to take it anywhere you want. When connected to our adapter, the
Kasa Smart camera allows for a pre-roll which begins recording a few seconds before every clip.
• Crystal Clear 1080p Video
Sharp and clear 1080p video makes sure you never miss a thing. In the dark, the camera will detect
activity up to 25 feet away with Night Vision.
• Rechargeable Lithium Ion Battery*
With a low-power Wi-Fi protocol, we’ve extended the battery life for a longer and smarter experience.
*Optional: Adapter for wired use if needed.
• Built-in Siren and 2-way Talk
Use crisp 2-way audio to communicate with the delivery person at your front door or use the
camera’s siren to scare away intruders.
• More Than A Hub
The hub helps save power and also plays as a secondary security alarm. Any intruder will be met with
an unwelcome sound.
• Weatherproof
The Kasa Smart Wire-Free Camera is weatherproof and will be protected against rain and dust.
3
Appearance
Kasa Smart Wire-Free Camera has a system LED that changes color according to its status, speakers and microphone, and a Sync button. See the
explanation below:
Speaker and Microphone
Built-in internal speaker and microphone are protected by the waterproof membrane.
！
Warning: Do NOT insert objects into the holes!
Sync button
• Press for 1 second duringDiscovery
mode:
Initiates the syncing process with hub
• Press and hold for about 15 seconds:
Resets the camera to factory settings
System LED
• Alternating amber and green:
Powering on or starting up
• Flashing green:
Connecting to hub (Discovery
mode)
• Solid green:
Connected to hub
• Quick ashing red:
Failed to connect to or sync with
hub
Flashing red once per minute:
Low battery (below 15%)
• Quick ashing amber:
Firmware updating
Flashing amber once per second:
Factory resetting
• Solid amber:
No connection, initializing, or
rebooting
• Solid blue:
Battery starts charging
• O:
No power or Status LED o
4
Kasa Smart Camera Hub has a LED ring that changes color according to its status, a Siren O button, and a Reset button. See the explanation below:
Reset button
• Press and hold for about 15 seconds
when neither siren nor alert is playing:
Resets the hub to factory settings
Siren O button
• Press for 1 second when siren is on:
Turns o the siren
System LED
• Alternating amber and green:
Connected to home router but no internet connection
• Alternating red and green:
Not connected to home router and internet
• Quick ashing green:
Camera attempting to sync with hub (Discovery mode)
Flashing green once per second:
Connected to home router and internet
• Solid green:
Camera connected to hub
• Solid red:
Camera too far from hub
• Flashing red:
Siren or speaker is on
• Quick ashing amber:
Firmware updating
Flashing amber once per second:
Factory resetting
• Solid amber:
Powering on or starting up
• O:
Communicating with camera and internet, no camera
connected, or no power
5
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download Kasa
Get the Kasa Smart app from the Apple App
Store or Google Play, or by scanning the QR
code below.
Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don't have an account, create one rst.
Step 3. Add Camera
Tap the button in the Kasa app, select
Add a Device, then select Kasa Cam Wire-
Free. Follow app instructions to add hub and
cameras.
6
Step 4. Mount Camera
Follow mounting instructions in the app for
ideal camera placement.
Enjoy!
Your camera is ready for use in your device list.
7
View Your Camera
After initial setup is complete, you can view your camera from anywhere.
View Smart Devices List
Go to the Devices page, then you can view the
list of all your cameras and any other smart
devices if any.
View Cameras List
Go to the Cameras page, then you can view
the list of all your cameras.
View Live Video
Tap a camera on the Devices or Cameras
page, then you can view the live video, talk to
a person near the camera, sound the siren to
scare away intruders, and more.
8
Congure Your Camera
On the live video page, you can congure your camera to meet various needs.
Set Schedule
Tap on the live video page, then you can
schedule an automatic On/Off event for your
camera to simplify your daily routine.
Change Camera Settings
Ta p on the live video page, then you can
view and change camera settings.
Tabla de contenidos
Otros manuales de Cámara de seguridad de TP-Link
TP-Link
TP-Link Tapo C320WS Manual de usuario
TP-Link
TP-Link TL-SC3130 Guía de inicio rápido
TP-Link
TP-Link NC200 Manual de usuario
TP-Link
TP-Link TL-SC3130 Manual de usuario
TP-Link
TP-Link Tapo C100 Manual de usuario
TP-Link
TP-Link vigi C445 Manual de usuario
TP-Link
TP-Link TL-SC3130G Manual de usuario
TP-Link
TP-Link VIGI C540-4G V1 Manual de usuario
TP-Link
TP-Link VIGI C540 Manual de usuario
TP-Link
TP-Link tapo C425 Manual de usuario
TP-Link
TP-Link Tapo TC70 Manual de usuario
TP-Link
TP-Link TL-NC230 Manual de usuario
TP-Link
TP-Link TL-SC3130G Manual de usuario
TP-Link
TP-Link TL-SC3130G Manual de usuario
TP-Link
TP-Link Tapo C400S2 Manual de usuario
TP-Link
TP-Link VIGI Manual de usuario
TP-Link
TP-Link Tapo C110 Manual de usuario
TP-Link
TP-Link Tapo C200 Manual de usuario
TP-Link
TP-Link Tapo C420S2 Manual de usuario
TP-Link
TP-Link tapo C125 Manual de usuario
