TP-Link TGR1900 Manual de usuario

User Guide

OnHub

REV1.0.1

191001

1984

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link

Technologies Co., Ltd. Google, Google Wifi, OnHub and other trademarks are owned by Google Inc.

http://www.tp-link.com

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1）This device may not cause harmful interference.

2）This device must accept any interference received, including interference that may

cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s authority

to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This device and its antenna must not be co-located or operating in conjunction with

any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile

Configurations. The antennas used for this transmitter must be installed to provide a separation

distance of at least 31cm from all persons and must not be co-located or operating in conjunction

with any other antenna or transmitter.”

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference, and

(2)This device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage

est susceptible d’en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment.This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un

environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20

cm de distance entre la source de rayonnement et votre corps.

This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils radio

exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif

ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage

reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Industry Canada Statement

Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725

MHz shall be such that the equipment still complies with the e.i.r.p. limit;

(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such

that the equipment still complies with the e.i.r.p. limits specified for point-to-point and

non-point-to-point operation as appropriate; and

(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation

mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.

(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority

users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause

interference and/or damage to LE-LAN devices.

Avertissement:

Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur

les restrictions susmentionnées, notamment :

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une

utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de

satellites mobiles utilisant les mêmes canaux;

(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à 5

350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e;

(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5

850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à

point et l’exploitation non point à point, selon le cas;

(iv) les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la

p.i.r.e. applicable au masque d’élévation, et énoncée à la section 6.2.2 3), doivent être

clairement indiqués.

(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute

puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes

5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des

dommages aux dispositifs LAN-EL.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 37cm

between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un

environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de

37cm de distance entre la source de rayonnement et votre corps.

Safety Information

When product has power button, the power button is one of the way to shut off the product;

when there is no power button, the only way to completely shut off power is to disconnect the

product or the power adapter from the power source.

Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock

and voiding the limited warranty. If you need service, please contact us.

Avoid water and wet locations.

Chapter 1 TGR1900 Theory of Operation

1.1 Overview of the Router

The TGR1900 integrates a Switch, Firewall, NAT-Router and Wireless AP. The TGR1900

delivers exceptional range and speed, which can fully meet the need of home networks and

users demanding high networking performance.

The TGR1900 utilizes a high speed ARM CPU. The router provides up to 600Mbps (2.4GHz) +

1300Mbps (5GHz) wireless connection with wireless clients. It is compatible with IEEE 802.11a,

IEEE 802.11b, IEEE 802.11g, IEEE 802.11n and IEEE 802.11ac products. Multiple protection

measures include Wi-Fi Protected Access (WPA2-PSK), as well as advanced firewall

protection.

Management of the device is provided by Google cloud services. All of the system software

for the platform and specifically for the control of all radios is signed and authenticated at

every time of initialization (booting). Google will build and distribute upgrades using the same

secure boot mechanism.

1.2 Main Features

Supports IEEE 802.11 a, b, g, n, ac and required WLAN amendments

Supports simultaneous 2.4GHz 600Mbps and 5GHz 1300Mbps connections for 1.9Gbps

of total available bandwidth

Two 10/100/1000Mbps Auto-Negotiation RJ45 LAN ports (Auto MDI/MDIX)

Provides a USB 2.0/3.0 port

Supports wired bridge mode and Router functionality

Multi-user sharing a high-speed Internet connection

WAN connection supports PPPoE, static IP configuration, and DHCP

Remote configuration, logging and device monitoring

Supports secure boot technology

Built-in DHCP server with static reservations

Built-in firewall and supports UPnP

Provides WPA2-PSK key management with AES cipher suite

Supports Bandwidth Control

Supports IPv6

Operating frequency including WiFi / BT & ZIGBEE：

Radio 2.4 GHz: 2.400GHz ~ 2.4835GHz

Radio 5 GHz: 5.170GHz ~ 5.250GHz, 5.735GHz ~ 5.835GHz.

Modulation type

CCK,DQPSK,DBPSK for DSSS

BPSK,QPSK,16QAM,64QAM,256QAM for OFDM

Chapter 2 OnHub

Table of Contents

Welcome

What’s In the Box

What You Need

Plug in OnHub

Get the Google Wifi App

Set-Up WiFi

Welcome to OnHub

We use the Internet for so much more than we used to. We stream movies, watch TV, download

music. OnHub keeps up with all the ways you're enjoying the Internet, easily and securely. Let's

plug it in and get started.

What’s in the Box

●OnHub wireless router with housing

●2x ethernet cables

●1 power adapter

What You Need

The Google Wifi app on Android or iOS mobile device:

●Android 4.0 and above

●iOS 7 and above

●A broadband Internet account via Ethernet connection—typically through a DSL or cable

modem. Contact your local Internet Service Provider (ISP) for details.

Plugging in the OnHub

a) Twist left and lift the plastic housing to find the power and ethernet ports at the base of the

port.

b) Connect one end of the provided ethernet cable to the OnHub ethernet WAN port

(SYMBOL) and the other end to one of the ethernet ports of your DSL or model cable.

c) Connect the cable from your power adapter to your OnHub and plug your OnHub into a

power outlet.

Important: Use only the AC adapter that came with your OnHub.

d) The status light will pulse blue when OnHub is ready for setup.

e) Open the Google Wifi app on your mobile device to set up your OnHub and wireless

network.

What color is the OnHub?

●White

○Solid: OnHub is ready to go.

●Blue

○OnHub is ready for setup or, if flashing, setting up.

●Teal / Green

○OnHub has successfully completed a command.

●Deep Orange / Red

○Something is wrong. Check the Google Wifi app for more details.

Set-Up WiFi

a) To get started, open the Google Wifi app.

On iOS, the app will prompt you to sign-in with your Google Account or ask you to create

a new account.

On Android, your OnHub will automatically be associated with the Google account used

with your Android phone.

What's a Google Account?

A Google Account gives you access to Google products like Gmail, Google+, YouTube, and

more with a single username and password. To create a new account, visit

https://accounts.google.com

b) Follow the on-screen instructions to set up your OnHub and WiFi network.

Connect to the onHub

○[Android] The Google Wifi app will detect your OnHub.

○[iOS] Follow the onscreen instructions to connect to your network in the

connection manager.

○Note: You may be asked to enter the setup code. Find these on a label under the

base of your OnHub.

Create WiFi network, name (SSID), and password

○Note: Your OnHub may automatically update software at this time. While it’s

updating, the status light on the OnHub will have a quick blue pulse. This should

only take about 5 minutes.]

Follow the onscreen instructions to complete setup. Your OnHub will slowly pulsate a

blue light when setup is in process.

Once you see the on-screen confirmation and the light on the OnHub is solid white,

OnHub has successfully completed setup.

Warranty

TP-Link 2 Year Warranty

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de TP-Link

TP-Link

TP-Link AC1900 Manual de usuario

TP-Link

TP-Link MR-3020 Manual de usuario

TP-Link

TP-Link Archer VR400 V2 Manual de usuario

TP-Link

TP-Link TL-SG2424 Manual de usuario

TP-Link

TP-Link Archer C9 Manual de usuario

TP-Link

TP-Link TL-MR150 Manual de usuario

TP-Link

TP-Link AC600 Manual de usuario

TP-Link

TP-Link Deco BE65 Manual de usuario

TP-Link

TP-Link TD-8817B Manual de usuario

TP-Link

TP-Link TD-8811 Manual de usuario

TP-Link

TP-Link TD-W8101G Manual de usuario

TP-Link

TP-Link Archer AX10 Manual de usuario

TP-Link

TP-Link TL-WR820N Manual de usuario

TP-Link

TP-Link Archer C88 Manual de usuario

TP-Link

TP-Link Archer C20 Manual de usuario

TP-Link

TP-Link TL-SF2109P Manual de usuario

TP-Link

TP-Link SafeStream TL-R600VPN Manual de usuario

TP-Link

TP-Link Archer MR600 Manual de usuario

TP-Link

TP-Link OnHub Manual de usuario

TP-Link

TP-Link Deco X20-4g Manual de usuario

TP-Link

TP-Link MR5-WR542G Manual de usuario

TP-Link

TP-Link SafeStream TL-R600VPN Manual de usuario

TP-Link

TP-Link TL-R470T+ Manual de usuario

TP-Link

TP-Link AC2100 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario