TP-Link ARCHER C1200 Manual de usuario

Conﬁguration Guide

TP-LINK C1200

For Windows 8

IMPORTANT MESSAGE

Your router has been pre-conﬁgured, you do not need to

follow each step of the set-up guide but should retain this

document in case you need to manually conﬁgure your

equipment.

To conﬁgure your PC/Laptop with your wireless password including

changing your wireless password, please proceed to step 4.

Contents

1. Physical Connection

2. Network Conﬁguration

3. Conﬁguring Internet

4. Conﬁguring WI-FI

5. Change of Password

1. PHYSICAL CONNECTION

Please refer to the Quick Installation Guide that came with your router.

PLEASE NOTE: Have your router powered on and connected directly to your

PC via Ethernet Cable before you begin, as these instructions are based on

wired Ethernet connection

2. NETWORK CONFIGURATION

PPPoE connection does not require you to have an IP address or DNS

settings manually encoded on your network card.

PPPoE connection uses authentication to establish the Internet

connection and its after doing this that your router is assigned an

IP and DNS settings from TPG.

To begin, your PC needs to receive a private IP address from the

router. Most NBN routers have DHCP enabled by default that

will take care of this.

To ensure your Network Card is ready for this, please follow the

following steps:

A. Click Start -> Control Panel -> Network and Internet ->

Network and Sharing Center -> Change adapter settings

B. Right click on Local Area Connection and select Properties

Conﬁguration Guide TP-LINK C1200

C. Click on Internet Protocol Version 4 (TCP/IPv4), and then click

Properties

D. Ensure “Obtain an IP address automatically” is selected

E. Ensure “Obtain DNS server address automatically” is selected

F. Click OK

Conﬁguration Guide TP-LINK C1200

3. CONFIGURING ROUTER

A. Open your browser and in the address bar type

http://tplinkwiﬁ.net or http://192.168.1.1 and press Enter

B. Enter admin for both the username and password and

click Login. If you have changed the login credentials,

please enter the current username and password for your

router interface.

C. Click Quick Setup tab towards the top of the page.

D. Select your Time Zone, and click Next.

E. Click on PPPoE, and click Next.

F. Type in your own TPG username and password, and

click Next.

G. You can change your Wi-Fi settings in this step. By default,

the router is conﬁgured with the following Wi-Fi security settings:

SSID (name for the Wi-Fi connection): TP-LINK_XXXX

(XXXX is a random 4 digit alpha numeric code)

Password: By default, the password is printed on a sticker

underneath your router (Wireless Password/Pin). You can

enter your own text as an option.

Click Next to continue.

H. On the summary page click Save

Click Finish to complete the Quick Setup.

4. CONFIGURING WI-FI

To use Wi-Fi, ensure that you have already setup your wireless

adapter on your PC/laptop.

Conﬁguration Guide TP-LINK C1200

3. Find the SSID (network name) of your modem

and click Connect By default, the network name

should be TP-LINK_XXXX (XXXX is a random 4

digit alpha numeric code).

4. Select the Wi-Fi network you wish to connect to.

By default, the Wi-Fi access point name (SSID) is

TP-LINK_XXXX (XXXX is a random 4 digit alphanumeric code)

5. Enter the network security key (Wi-Fi password)

and then click Next. By default, the password is

printed on a sticker underneath your router

(Wireless Password/Pin).

2. Click Settings inside the Charms Bar.

1. Open the Charms Bar by moving your mouse pointer to the top corner of the screen and then moving your

mouse pointer down. If you have a touch screen, simply swipe from the right side of the screen to the left.

TP-LINK_XXXX

5. CHANGE OF PASSWORD

For security purposes we highly recommend that you change your

password if you are using your default or

if you believe your password security has been compromised.

To change your password, ﬁrst please visit www.tpg.com.au/password

Your new password will take approximately 10-15 minutes to take effect,

after which you must reconﬁgure your new password in your router.

PLEASE NOTE:

Each time your router is powered on, it will initialize this automated authentication process after which your router will receive

a public IP address (ﬁxed or dynamic depending on your plan) and DNS settings from TPG.

Conﬁguration Guide TP-LINK C1200

13 14 23tpg.com.au/support

Otros manuales para ARCHER C1200

Tabla de contenidos

Otros manuales de Enrutador de red de TP-Link

TP-Link

TP-Link TD-8841T Manual de usuario

TP-Link

TP-Link Archer C2 Manual de usuario

TP-Link

TP-Link JetStream T2600G-28TS Manual de usuario

TP-Link

TP-Link Archer MR400 Manual de usuario

TP-Link

TP-Link Archer C50 Manual de usuario

TP-Link

TP-Link ARCHER C3150 Manual de usuario

TP-Link

TP-Link Archer C50 Manual de usuario

TP-Link

TP-Link Archer BE805 Manual de usuario

TP-Link

TP-Link Archer D50 Manual de usuario

TP-Link

TP-Link AX17 Manual de usuario

TP-Link

TP-Link TL-WR1043ND Manual de usuario

TP-Link

TP-Link TL-WR850N Manual de usuario

TP-Link

TP-Link X1500 Manual de usuario

TP-Link

TP-Link TD-8816 Manual de usuario

TP-Link

TP-Link Archer MR600 Manual de usuario

TP-Link

TP-Link TL-R480T+ Manual de usuario

TP-Link

TP-Link TD-W8961NB Manual de usuario

TP-Link

TP-Link JetStream TL-SL3428 Manual de usuario

TP-Link

TP-Link tl-wr845n Manual de usuario

TP-Link

TP-Link Archer D2 Manual de usuario

TP-Link

TP-Link TL-MR105 Manual de usuario

TP-Link

TP-Link TL-WA860RE Manual de usuario

TP-Link

TP-Link TL-WR840N Manual de usuario

TP-Link

TP-Link TL-R860 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario