TP-Link Tapo P306 V1.60 Manual de usuario

User Guide

Smart Wi-Fi Outlet Extender

Contents

About This Guide ···················································· 1

Introduction ······························································· 2

Appearance ······························································· 3

System LED Status ··············································· 4

Set Up Your Smart Device via Tapo·············· 5

Set Up Your Smart Device via HomeKit ····· 6

Authtication································································ 9

About This Guide

This guide provides a brief introduction to the Smart Wi-Fi Outlet Extender and the Tapo app, as well as regulatory information.

Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and

descriptions in this guide are only examples and may not reect your actual Tapo experience.

Conventions

In this guide, the following convention is used:

Convention Description

Blue Key information appears in blue, including management page text such as menus, items, buttons and so on.

Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.

Note: Ignoring this type of note might result in a malfunction or damage to the device.

More Info

• Specications can be found on the product page at https://www.tapo.com.

• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.

Introduction

The smart Wi-Fi outlet extender is designed to integrate your outlets in one, plus control your lighting and appliances from anywhere.

• 9-in-1 Outlet Extender - Features 3× individual smart outlets, 3× always-on outlets, and 3× USB ports. Perfect for any area with limited outlets.

• Fast Charging USB Ports - 1× USB-C port (PD) and 2× USB-A ports (QC3.0) each deliver up to 18 W of power. Charge your iPhone to 50% in just

half an hour.§

• Dual Antennas - Experience a more reliable connection and superior anti-interference capabilities with dual antennas.

• App & Voice Control - Control 3× AC outlets (individually) and 3× USB ports (together) through the Tapo app, Apple Home app, or compatible voice

assistants.

• Smart Night Light - The built-in light sensor senses the low ambient lighting and activates a night light for you. You can also adjust brightness and

set schedules via the Tapo app or voice assistant.

• HomeKit Supported - Control your plugged-in appliances using the Apple Home app and Siri on your iPhone, iPad, Apple Watch, HomePod, or Mac.

• Remote Control - Use the Tapo app to control the smart outlet extender at any time from anywhere.

• Surge Protection and More - Built-in surge protection, overheat protection, and a UL94-V0 ame-retardant shell help keep your home safe.

• Wide Space - Eortlessly connect and power multiple devices all at once.

• Firmly Mounted - Secure the extender to wall outlets using the included widgets without worrying about wobbling when unplugging devices. Its

stablizing post is adjustable to t any wall outlet.

Adjustable Stabilizing Post

Mounting Screw

Appearance

1× USB-C (PD)

Phone Holder

Ambient Light Sensor:

Senses the amount of ambient light and works as a

trigger for the integrated night light.

System LED

3× Smart Outlets

· Individual LED Indicators:

Indicate the status of the the corresponding smart

outlet.

· Individual Power Buttons:

Press once to turn on/o the corresponding smart

outlet.

Press and hold any one of them for 5s to reset Wi-Fi

while keeping other settings.

Press and hold any one of them for 10s to restore

factory default settings.

Smart Night Light

2× USB-A (QC)

USB LED Indicator

Mounting Hole

3× Always-On Outlets

System LED Status

LED Status Event

Solid white Starting up;

Connected to Cloud.

Blinking white and orange slowly Ready for setup;

Resetting Wi-Fi.

Solid orange Connected to Wi-Fi.

Blinking orange slowly Disconnected from Wi-Fi.

Blinking white slowly Firmware updating.

Blinking white and orange quickly Restoring to factory default settings.

Set Up Your Smart Device via Tapo

Follow the steps below to get started with your new smart plug, or you can follow the setup video at https://www.tp-link.com/support/setup-video/.

Step 1. Download Tapo App

Get the Tapo app from the App Store or

Google Play, or by scanning the QR code

below.

Step 2. Log In

Open the app, and log in with your TP-Link ID.

If you don't have an account, create one rst.

Step 3. Add Your Plug

Tap the button in the Tapo app, choose

Plugs under the Tapo brand, and select your

model. Follow the instructions in the Tapo app

to complete the setup.

Set Up Your Smart Device via HomeKit

Before You Start

• Your iPhone/iPad should be connected to a stable 2.4 GHz Wi-Fi network with internet access.

• Ensure your iPhone/iPad, HomeKit device, and Apple home hub* (if any) are connected to the same Wi-Fi network.

*The hub like HomePod, HomePod mini, and Apple TV helps control your HomeKit devices remotely, share the devices with others, and

automate your devices to do tasks for you.

• To control the HomeKit-enabled device in the Apple Home app, the latest iOS or iPadOS version is highly recommended.

• Find the HomeKit QR code or numeric code on your device or in its packaging. After setup, you can save the code in Device Settings in

the Tapo app.

How to Set Up

1. Factory reset your Tapo device.

2. Open the Apple Home app.

If you have added your smart device to the Tapo app, you can go to Device Settings > Device Info in the app to nd the HomeKit setup

code and add the device to the Home app.

3. Scan the HomeKit QR code or enter the provided numeric setup code.

4. Follow the instructions in the app to complete setup.

Failed to Set Up?

• Factory reset the smart device and restart your phone. Then try again.

• Move your iPhone/iPad and the smart device closer to the router to get a stronger Wi-Fi signal.

• HomeKit setup will be disabled in 10 minutes since the smart device is powered on. You can power o your smart device, then power it

on and try again.

• Creating a new home in the Home app can greatly help set up your smart device.

• You can visit https://www.tp-link.com/support/faq/3390/ or scan the QR code below for more troubleshooting instructions.

Scan QR Code

https://www.tapo.com/support

for Technical Support, FAQs & more

Authtication

FCC compliance information statement

Product Name: Smart Wi-Fi Outlet Extender

Model Number: Tapo P306

Responsible party:

TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: [email protected]om

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

Tabla de contenidos

Otros manuales de Extensor de TP-Link

TP-Link

TP-Link TL-WA850RE Manual de usuario

TP-Link

TP-Link RE500X Manual de usuario

TP-Link

TP-Link AC750 Archer C2 Manual de usuario

TP-Link

TP-Link RE220 Manual de usuario

TP-Link

TP-Link RE210 Manual de usuario

TP-Link

TP-Link TL-WA860RE Manual de usuario

TP-Link

TP-Link TL-WPA8630 Manual de usuario

TP-Link

TP-Link TL-WPA7517 Manual de usuario

TP-Link

TP-Link TL-WA730RE Manual de usuario

TP-Link

TP-Link TL-WPA7510 KIT Manual de usuario

TP-Link

TP-Link TL-WA750RE Manual de usuario

TP-Link

TP-Link RE200 Manual de usuario

TP-Link

TP-Link TL-WA855RE Manual de usuario

TP-Link

TP-Link TL-WA850RE Manual de usuario

TP-Link

TP-Link TL-WA855RE Manual de usuario

TP-Link

TP-Link TL-WPA4220 TKIT Manual de usuario

TP-Link

TP-Link AC1750 Manual de usuario

TP-Link

TP-Link TL-WA860RE Manual de usuario

TP-Link

TP-Link TL-WPA2220 Manual de usuario

TP-Link

TP-Link RE205 Manual de usuario

TP-Link

TP-Link TL-WA830RE Manual de usuario

TP-Link

TP-Link RE300 Manual de usuario

TP-Link

TP-Link RE350 AC1200 Manual de usuario

TP-Link

TP-Link RE205 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manual de usuario

TP-Link tapo P306 V1.60 Manual de usuario

Manuales populares de Extensor de otras marcas