Toshiba Nv Series Instrucciones de funcionamiento

6F8C1370

Functional Manual

TC-net I/O system

8ch-Pulse Input Module PI918

Unified Controller

nv Series

Notes

(1) The technical information provided herein describes typical operations and applications of the product and does not

guarantee the intellectual property rights or other rights of Toshiba or third parties nor allows license of its use.

(2) No part or the whole of this document may be reproduced without prior consent.

(3) The information herein may be changed in the future without notice.

(4) All possible measures have been taken to prepare the information herein. If you have any question, comment, or

find any error, please contact us.

PROSEC, TOSLINE, TOSDIC, CIEMAC are trademarks or registered trademarks of Toshiba Corporation.

Microsoft, Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.

DeviceNet is a registered trademark of Open DeviceNet Vender Association Inc.

Unified Controller nv series TC-net I/O system 8ch-Pulse Input Module PI918 Functional Manual

Safety Precautions

The product and the instruction manual describe important information to prevent possible

harm to users and damage to the property and to use the product safely.

Understand the following description (signs and symbols), read the text and observe

descriptions.

Description of signs

Sign Meaning of the sign

DANGER This indicates an immediate danger that may result in death or

serious injury if not avoided.

WARNING This indicates a danger that may result in death or serious injury*1

if not avoided.

CAUTION This indicates a danger that may result in minor or moderate

injury*2 or only a physical damage if not avoided.

*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock,

broken bones, or intoxication that will have aftereffects and require hospitalization or long-term

hospital visits for healing.

*2: An injury indicates an injury, burn, or electric shock that does not need hospitalization or long-term

hospital visits for healing.

*3: Aproperty damage indicates consequential damage in terms of breakage of properties or materials.

Description of symbols

Symbol Meaning of the symbol

Prohibited

Indicates “Prohibition” or “You must not do”.

Specific details are indicated near the symbol with pictures and text.

Mandatory

Indicates “Mandatory Action” or “Do as indicated”.

Specific details are indicated near the symbol with pictures and text.

Warning

Indicates Warning.

Specific details are indicated near the symbol with pictures and text.

(Note) Descriptions of Prohibition, Mandatory Action, and Warning vary depending on the display on

the main unit.

6F8C1370

1. Safety Precautions in Installation

WARNING

Ground

Ground the device.

Otherwise, it may cause an electric

shock or fire.

CAUTION

Prohibited

Do not install, store, or use it in the

following environments.

・A place with a lot of dust

・A place with corrosive gases (SO2,

H2S) ore flammable gases

・A place with vibrations and shocks

exceeding the allowed values

・A place with condensations due to

rapid temperature changes

・A place with low or high temperature

outside of the installation condition

・A place with high humidity outside of

the installation condition

・A place with direct sunlight

・A place near equipment generating

strong radio waves or magnetic fields

It may cause accidents.

Mandatory

Install the device in a place where

maintenance and inspection can be

done easily.

Otherwise, it may cause accidents.

Prohibited

Do not block the ventilation hole or

air inlet/outlet.

It may cause fire or failure due to

overheat.

Prohibited

Do not insert any foreign object such

as wasted lines into the module or

unit.

It may cause fire, failure, or

malfunction.

Mandatory

Install the power module, controller

module, station bus module, and

TC-net I/O module to the base unit.

Otherwise, it may cause an electric

shock, injury, or failure.

Do not use it alone or for other purposes.

Mandatory

Install the power module, controller

module, and I/O module to the base

unit for the nv series because they

are dedicated to the nv series.

Otherwise, it may cause an electric

shock, injury, or failure.

Do not use it alone or for other purposes.

Mandatory

Install or remove the module, base

unit, and terminal block while the

power is off.

Otherwise, it may cause an electric

shock, malfunction, or failure.

Unified Controller nv series TC-net I/O system 8ch-Pulse Input Module PI918 Functional Manual

iii

Mandatory

For installation and wiring of the

system, observe the installation

conditions and methods described in

this document.

Otherwise, it may cause a fall, fire,

failure, or malfunction.

Mandatory

When connecting the connectors

and cables or installing the module

to the base unit, press them fully

until they clicks, and secure them

with screws tightly.

Insufficient tightening may cause

failure or malfunction due to

vibrations.

6F8C1370

2. Safety Precautions on Wiring

WARNING

Mandatory

Connect the cables while the power

is off.

Otherwise, it may cause an electric

shock or failure.

Mandatory

When wiring the module, use crimp

contacts with sheath, or cover it

with tape.

Otherwise, exposed conductors may

cause an electric shock.

Mandatory

Install the terminal block cover

securely to the terminal block.

Exposed conducting parts may cause an

electric shock.

CAUTION

Mandatory

Connect an external power supply

that matches the rating.

Otherwise, it may cause an explosion or

fire.

Mandatory

Wiring work must be done by

qualified experts.

Wrong wiring may cause a fire, electric

shock, or failure.

Mandatory

Install a fuse that matches the

current capacity to the external

circuit for overload protection of the

relay output module.

Otherwise, a load short-circuit may

cause an accident or damage to the

machine.

Mandatory

When using the contact relay used

for relay output, check the contact

life.

If the contact life of the relay is expired,

an output error may occur due to a

defective contact, resulting in an

accident or damage to the machine.

Contact relays have a life due to wearing

of the contact. If the life is expired,

replace it with a new one.

Mandatory

Install the battery before use.

If the RAM is operated without any

battery, memory data or programs may

be lost, causing an accident or damage

to the machine due to malfunction.

Replace the battery according to the

battery replacement cycle guideline.

Unified Controller nv series TC-net I/O system 8ch-Pulse Input Module PI918 Functional Manual

Mandatory

Turn on the power in the following

order:

Turn on the power of the nv series, and

then turn on the I/O module supply

external power and external load power.

If this order is not followed, it may cause

an accident or damage to the machine

due to malfunction.

Mandatory

For system safety, turn off the load

power before the power of the nv

series.

If this order is not followed, it may cause

an accident or damage to the machine.

Share the external power supply for the

I/O module with the load power supply

whenever possible. If this is not

possible, construct the system so that

the external power supply and load

power supply are turned off

simultaneously.

Mandatory

Construct the emergency stop

circuit and interlock circuit outside

the nv series.

Otherwise, it may cause an injury

accident or damage to the machine if

failure or malfunction occurs in the nv

series.

3. Safety Precautions in Daily Use

WARNING

No touch

Do not touch the terminals of the

module and unit during

energization.

It may cause an electric shock.

Prohibited

Do not modify, repair, disassemble,

or adjust the device, module, or

board.

It may cause an electric shock, fire,

injury, or failure.

Upon faulty operation or failure, contact

Toshiba's branch office or service offices.

Mandatory

Before using, check that the power

capacity, frequency, voltage, and

regulation comply with the device

specifications.

If not, it may cause damage of the

device, or fire due to overheat, as well

as not obtaining the original

performance of the device.

Prohibited

When the ambient or internal

temperature of the device rises

abnormally or failure occurs in the

device, stop using the device, turn

off the power, and contact one of

Toshiba's service representatives.

Using it as it is may cause fire due to

overheat.

No touch

Do not touch the terminals of the

module and unit during energization.

It may cause an electric shock.

The power supply module is for the nv

series only. Do not use it alone for any

other purposes.

6F8C1370

CAUTION

Mandatory

When performing program changes

during operation, forced output,

run, or halt operations, ensure

safety.

Wrong operations or failure to ensure

safety may cause an accident or damage

to the machine.

Mandatory

When there is any smoke or strange

odor, turn off the power.

Otherwise, it may cause a fire or electric

shock.

Contact one of our branch offices or

service agencies.

No touch

Do not touch the card parts, contacts,

connectors, or soldered surface in the

module.

Ends of the lead wire of the parts may

cause an injury, or electrostatic

breakdown of the ICs or LSIs may occur,

resulting in failure.

Prohibited

Do not forcefully bend, pull, or twist

the power cord and cables.

It may cause breaks or heating.

Prohibited

Do not insert any metal into the gaps

of the device main body.

It may cause fire.

4. Safety Precautions in Maintenance and Inspection

WARNING

Mandatory

When installing or removing the

module, unit, terminal block, or

wiring cable, make sure that the

external power supply is off.

Otherwise, there will be live electric

poles on the back of the external

terminal block of the module, causing an

electric shock.

Prohibited

Do not connect the battery in

reverse, charge, disassemble,

overheat it, throw it into fire, or

short-circuit it.

It may cause an explosion or fire.

Mandatory

When replacing the power fuse or

alarm fuse of the device, turn off the

device.

Otherwise, it may cause an electric shock

or fire.

Mandatory

Replace fuses or batteries with

specified items.

Using anything other than specified may

cause a fire or failure.

Unified Controller nv series TC-net I/O system 8ch-Pulse Input Module PI918 Functional Manual

vii

Mandatory

Be extremely careful when

measuring the power supply voltage

at the power terminal part of the

module during an inspection.

Otherwise, it may cause an electric

shock.

CAUTION

Mandatory

Replace the battery every 5 years.

If the battery is worn, the data or

programs saved in the controller module

may be lost, causing an accident or

damage to the machine due to

malfunction.

Mandatory

Replace the shutdown capacitor

every 8 years.

If the shutdown capacitor is worn, the

data or programs saved in the controller

module may be lost, causing an accident

or damage to the machine due to

malfunction.

Mandatory

Replace the battery for the PU811

and PU821 every 4 years

(confirmation required) if the annual

average temperature is 30°C or less,

or every 2 years (confirmation

required) if it is above 30°C.

If the battery is worn, the data or

programs saved in the PU811 and PU821

may be lost depending on the

application, causing an accident or

damage to the machine due to

malfunction.

5. Safety Precautions in Disposal

WARNING

Prohibited

Do not throw the lithium battery

into a fire.

The battery may explode.

CAUTION

Mandatory

When disposing of the lithium

battery or Ni-Cd battery, follow the

ordinances or rules of the local

government.

Otherwise, it may cause environmental

damage.

Mandatory

Dispose of the unit and module of

the nv series as industrial waste.

Otherwise, it may cause environmental

damage.

6F8C1370

viii

6. Checking the Warning Label on the Main Body

Check that warning label is attached on the main body.

If the label is missing or hard to read due to stain, contact our service department.

[Warning symbols on the nv series main body]

This symbol is a warning symbol for dangerous parts. It is attached on plac

where there is a risk of an electric shock or a risk of damage to the main body

due to wrong wiring.

Note the following where this symbol is present.

●Touching the power input terminal of the power supply module while the power is on

causes an electric shock and is very dangerous.

Do not touch the power input terminal.

●For safety, turn off the power before wiring or performing maintenance and

inspection.

●Wire the power input terminal correctly, and avoid applying any voltage exceeding

the specified voltage range. It may cause failure or damage.

●Perform connector connection of the nV-Tool port after turning off the power of the

nV-Tool (such as the PC).

Turn on the power of the nV-Tool after connection.

Be careful not to short-circuit the connector pins with the connector cover.

[Warning stickers]

The warning sticker as shown in the

left figure is attached to the power

terminal of the nv series (except for

power supplies below 24V).

Remove the sticker from the mount,

and attach it on the main body of the

nv series, or on a location near the nv

series where it can be seen easily.

There are stickers in both Japanese

and English. Use the one that suits

your need.

When wiring, remove the sticker

mount.

If the sticker is damaged, contact

you

r distributor.

Otros manuales para nv Series

Tabla de contenidos

Otros manuales de Controladores de Toshiba

Toshiba

Toshiba V Series Manual de usuario

Toshiba

Toshiba V Series Manual de usuario

Toshiba

Toshiba V200 Series Manual de usuario

Toshiba

Toshiba Prosec T-Series Manual de usuario

Toshiba

Toshiba Programmable Controller PROSEC T3 Manual de usuario

Toshiba

Toshiba BMS-CT2560U-E Manual de usuario

Toshiba

Toshiba BMS-CT2560U-E Manual de usuario

Toshiba

Toshiba TCB-TSC640-PY Manual de usuario

Toshiba

Toshiba Programmable Controller PROSEC T3 Manual de usuario

Toshiba

Toshiba TSL3000 Manual de uso y cuidado

Toshiba

Toshiba TOSVERT VF-S15 series Manual de usuario

Toshiba

Toshiba RBC-EXW21E2 Manual de usuario

Toshiba

Toshiba TE3 Series Manual de usuario

Toshiba

Toshiba JK Series Manual de usuario

Toshiba

Toshiba BMS-CT1280UL Manual de usuario

Toshiba

Toshiba V Series Manual de usuario

Toshiba

Toshiba LC531 Series Manual de usuario

Toshiba

Toshiba nv Series Manual de usuario

Toshiba

Toshiba JK-UC1 Manual de usuario

Toshiba

Toshiba TE-18-BP Guía de solución de problemas

Toshiba

Toshiba TS3000 Series Manual de usuario

Toshiba

Toshiba V Series Manual de usuario

Toshiba

Toshiba V Series Manual de usuario

Toshiba

Toshiba nv Series Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario

Toshiba nv Series Instrucciones de funcionamiento

Manuales populares de Controladores de otras marcas