Topcon RL-VH3A Manual de usuario

2002

RL-VH3 Series

(A/B/G)

INTERIOR

LASERS

All of the features you would expect ... and more!

Introducing the next generation interior lasers from Topcon, the RL-VH3 series.

This is the second generation to feature Topcon’s exclusive ultra-visible Green Beam®

(RL-VH3G). It quadruples beam brightness so you’ll never lose the beam, even in

direct sunlight. The RL-VH3 series is equipped with many "Smart" features, improved

battery life, excellent spot quality, and a full function optional remote, the RL-VH3

series is the only choice. It’s the one-man layout tool you’ll have to see to believe!

Level Floors to Ceilings and Everything in Between

For horizontal levelling and alignment, Topcon’s unique scanning technology increases

levelling production on ceiling grids, soffit elevations, and raised access flooring.

The RL-VH3 greatly simplifies any job requiring a horizontal reference level or slope.

Finish Walls Faster and Better

Set-up any RL-VH3 on its side (all have a built-in floor mount) to manage vertical layout and

alignment. The unique automatic plumb beam instantly establishes initial layout points and

the laser’s rotation transfers these points to any surface on the job to position studs, drop

walls, or bulkheads. With the 90° beam emitted from the top and bottom of the RL-VH3 you

can speed the pace of any 90° layout or alignment job, quickly establishing corners and Tee’s.

Simply smarter...

SmartScan™

A rotating laser beam is

great, but when you need

a concentrated laser line,

Topcon’s SmartScan lets

you draw a line of focused

laser light on any surface,

to any length you need.

And it stays there as long

as you need. All done

automatically from the

target.

SmartLine™

Aligning the beam for

vertical operation is,

you guessed it, automatic.

Simply place the target at

your farthest control point

and let the laser do the rest.

The beam automatically

centers on the target. You

get one person alignment

at record breaking speed.

SmartSlope

Raking-in a beam to match

a slope has always been

hard, usually requiring two

people and a lot of guess

work. Not anymore. Just like

SmartLine, put the target

at the right elevation and

the beam automatically

drives to it and stays there.

And it works for either

compound or single slopes.

One person. Accurate. Easy.

SmartPlumb

Vertical setups are fast and

accurate because the beam

automatically gives you a

plumb point directly below

the aperture. Just press

the SmartPlumb button

and the beam plumbs

down. You get the perfect

setup point, plus a scan

line for roughing in. It’s

great for tripod setups.

Only Topcon gives you these "world’s first" features to make your work easier and more productive than ever.

It’s brighter. Up to four times brighter

than conventional beams. You can see

the green beam anywhere under any

conditions. Set the laser up for best

coverage every time, no need to worry

about windows or other lighted areas.

You’re using the beam instead of losing

it, so the job gets done faster.

Isn’t that why you buy a laser in the

first place?

Whether green or red, the more tightly focused the beam, the brighter.

The RL-VH3A & G are the world’s only lasers to focus automatically on the target, no matter where you are on the job.

Because conventional beams focus at just one distance, the beam width varies from one work area to the next.

With SmartFocus, you can count on the tightest and brightest possible line of laser light where you need, automatically.

Simultaneous 90° beam

for plumb and layout

Rugged, sealed design

protects the unit from

dust and moisture

Simple push button slope control

to keep the job moving

Variable rotation speeds

from 0 to 300

Horizontal and vertical

SmartPlumb control

SmartPlumb™ Automatic

Plummet Beam

Floor Mount provides fast setup over a

point and includes tripod mount

Electronic self-levelling mechanism

provides fast setups and the world’s most

reliable and stable leveling

Compact in design with integrated

handle and weighing only 6.4 lbs (2.9kg),

the RL-VH3G is truly portable and

easy to set-up

The optional RC-30 radio remote handles

all of the functions of the RL-VH3 series

lasers. It features an operational range

of ±100m, two-way laser communication,

uses selectable transmission

frequencies, and the ability

to pinpoint focus the beam

on any surface.

The RL-VH3 is the completely

"hands-free" laser, but if you

need a remote the RC-30 is

your answer.

Why Green?

RC-30 Optional Remote

Focusing on Visibility

Topcon’s

RL-VH3G

vs.

Their

Red Beam

20’ / 6m

Topcon’s

RL-VH3G

vs.

Their

Red Beam

70’ / 20m

Topcon’s

RL-VH3G

vs.

Their

Red Beam

150 / 50m

SPECIFICATIONS

Designs and specifications here in are subject to change without prior notice.

In order to obtain the best results with this instrument,

please be sure to review all user instructions prior to operation.

RL-VH3G RL-VH3A RL-VH3B

Beam Type 532nm Green Laser 635nm Red Laser 635nm Red Laser

SmartFocus™ Yes Yes No

SmartScan™ Yes Yes Yes

SmartLine™ Yes Yes Yes

SmartPlumb™ Yes Yes Yes

Vertical Beam Yes (up and down) Yes (up and down) Yes (up only)

Vertical Accuracy ±15" ±15" ±15"

Horizontal Accuracy ±10" ±10" ±10"

Rotating Speed (RPM) 30 to 300 Selectable 30 to 600 Selectable 30 to 600 Selectable

Self-Levelling Range ±5° ±5° ±5°

Operating Range 100m (330’) Diameter 100m (330’) Diameter 100m (330’) Diameter

Power Sources

Batteries Rechargeable/Alkaline Rechargeable/Alkaline Rechargeable/Alkaline

External AC/12vDC AC/12vDC AC/12vDC

Operating Temperature -4 to 122°F (-20° to 50°C) -4 to 122°F (-20° to 50°C) -4 to 122°F (-20° to 50°C)

Laser Classification Less than 5mw/Class IIIa Less than 5mw/Class IIIa Less than 5mw/Class IIIa

Water/Dust Proof Yes Yes Yes

Field Calibration Yes Yes Yes

Dimensions 214 x 123 x 259.5 mm 214 x 123 x 259.5 mm 193.5 x 123 x 259.5 mm

(8.4" x 6.6" x 10.2") (8.4" x 6.6" x 10.2") (7.6" x 6.6" x 10.2")

Standard Warranty 2 Years 2 Years 2 Years

RC-30 Remote Optional Optional Optional

Wide Array of Power Choices

• Rechargeable Ni-H battery pack

• 4 Alkaline Batteries

• 230 AC/12vDC Operation

• 40 hr alk / 30 hr Ni-H operation

• Runcharge during AC or 12vDC

operation

RL-VH3 Series Standard Package

• Rechargeable Ni-H Battery Pack

• 2 Magnetic Ceiling Targets

• Floor Mount

• Hard Shell Carry Case

• SmartLine Target

Optional

• Adjustable wallmount (A&G)

• Standard wallmount (B model)

Topcon has the industry’s most complete

line of interior lasers including the NEW

low-cost interior laser with high-end

features, the RL-VH3C. Each has unique

technologies to make your jobs easier,

faster and more profitable.

Great mix of price and perfor-

mance RL-VH3A and RL-VH3B

Priced for value, the RL VH3A is a red

beam laser that offers all of Topcon’s

"smart" interior laser technologies like

SmartScan, SmartFocus, SmartLine and

SmartSlope. The RL-VH3B is the choice

among contractors looking for a high

performance laser at a great price.

Featuring Topcon’s high precision

levelling system, unique scanning

technology, selectable rotating speeds,

and slope match.

Certificatie No. 03682548

TOPCON EUROPE B.V.

Capelle a/d IJssel, The Netherlands

Your Topcon Partner

Item number: 5410201

Printed: 08-2002

TOPCON EUROPE B.V.

Essebaan 11

2908 LJ Capelle a/d IJssel

The Netherlands

Phone: 31-(0)10 - 458 50 77

Fax: 31-(0)10 - 458 50 45

E-mail: [email protected]

http: //www.topconeurope.com

Este manual sirve para los siguientes modelos

Otros manuales de Instrumento de medición de Topcon

Topcon

Topcon RC-5 Manual de usuario

Topcon

Topcon GTS-750 Series Manual de usuario

Topcon

Topcon RL-HV Series Manual de usuario

Topcon

Topcon IM-1000 Manual de usuario

Topcon

Topcon OS Series Manual de usuario

Topcon

Topcon GPT-7000i Series Manual de usuario

Topcon

Topcon GTS-710 Series Manual de usuario

Topcon

Topcon RL-VH4DR/G2 Manual de usuario

Topcon

Topcon RL-H1Sa Manual de usuario

Topcon

Topcon RD-80SA Manual de usuario

Topcon

Topcon ES-101 Manual de usuario

Topcon

Topcon CL-300 Instrucciones de funcionamiento

Topcon

Topcon IS01 Manual de usuario

Topcon

Topcon BM-7AC Manual de usuario

Topcon

Topcon GTS-821A, GTS-822A, GTS-823A, GTS-825A Manual de usuario

Topcon

Topcon BM-7A Manual de usuario

Topcon

Topcon DS Series Manual de usuario

Topcon

Topcon RL-H5A Manual de usuario

Topcon

Topcon Ez METER EZ-200 Manual de usuario

Topcon

Topcon RL-SV2S Manual de usuario

Topcon

Topcon UVR-300 Manual de usuario

Topcon

Topcon IM-600 Manual de usuario

Topcon

Topcon AT-G4 Manual de usuario

Topcon

Topcon SR-NIR Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario