Tohnichi CEM3-P Manual de usuario

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Tohnichi

Tohnichi

Tohnichi CTB10N2X8D-G Manual de usuario

Tohnichi

Tohnichi WQL Series Manual de usuario

Tohnichi

Tohnichi DB SERIES Manual de usuario

Tohnichi

Tohnichi CL2NX8D Manual de usuario

Tohnichi

Tohnichi TiQL Manual de usuario

Tohnichi

Tohnichi QL Manual de usuario

Tohnichi

Tohnichi QL25N Series Manual de usuario

Tohnichi

Tohnichi SP Manual de usuario

Tohnichi

Tohnichi CL2Nx8D-MH Manual de usuario

Tohnichi

Tohnichi MPQL Manual de usuario

Tohnichi

Tohnichi CSPFHW Manual de usuario

Tohnichi

Tohnichi CTA2-G Manual de usuario

Tohnichi

Tohnichi DATA TORK CEM3-G-WF Manual de usuario

Tohnichi

Tohnichi PHL Manual de usuario

Tohnichi

Tohnichi DATA TORK CEM3-G Manual de usuario

Tohnichi

Tohnichi TW750N2 Manual de usuario

Tohnichi

Tohnichi SF Manual de usuario

Tohnichi

Tohnichi CMQSP Manual de usuario

Tohnichi

Tohnichi SP Series Manual de usuario

Tohnichi

Tohnichi DQL Manual de usuario

Tohnichi

Tohnichi YCL2 Manual de usuario

Tohnichi

Tohnichi QSPCA Series Manual de usuario

Tohnichi

Tohnichi QRSP-SP2-N Series Manual de usuario

Tohnichi

Tohnichi QLLS Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual

CEM3-P Program Version

Quick Start

1) After installing USB driver, and program software, set up “task list” in registration.

(Reference “CEM3-P Software Quick Start” or manual).

2) Move counter to “000”, hold MD key for 2 seconds. “DAT-IN” appears in display area. Press

Orange MEM key to enter set up mode:

Select Mode M or T, Auto-reset time, Buzzer on/off, Data out method, baud rate, default

settings, date and time setup.

(See standard CEM3 Quick Start for more details)

3) After confirming software setup ports and baud rates, install cable & hold down “MD” key for

2 seconds “DAT-IN” appears. In software select “transfer”, check groups and hit “transfer”.

If loading bar appears transfer is completed.

4) Use arrows to move count number off of “000”. Group id will appear. Select group name by

pressing MD key. Display will flash; use arrow keys to scroll through groups. Select by press-

ing MEM key.

5) Number of bolts will flash then part name will appear. Press “MD” key to check upper and

lower torque limits. If you need to go back to groups names press down arrow key.

6) Begin taking measurements or tightening and save by pressing MEM key.

7) When ready to download select max. count number to be included. “--” will appear in the dis-

play to indicate readings are stored in that count.

8) Press “MD” 1x for data out D-OUT, press MD 2x, for ALL OUT ,. Select Receive Menu “Data”

in software then press MEM to activate selection. Save data to Excel file. To clear out data on

wrench press MD. 3x for D-Clr 4x for ALL CLR.then press MD and C keys at the same time.

CLEAR will flash in the display and data will be deleted.

CEM3-P Program Version

Quick Start

Basic Keypad Instructions:

On count of 1 or higher

• Select Group: Hold MD key until screen flashes

• Use Up(+) or Down (-) to Scroll Groups Press

MEM key to Select

• Number of Fasteners:(Flashes quickly)

Ex. 1/4 (first of 4 bolts)

• Press MD Key to see Upper/Lower Limits for

this fastener

• Apply Torque: Manually Save: Press MEM key

• Press MEM to repeat same Group or MD to

Select New Group

.

Note: Download or delete periodically

to avoid maxing out the memory. If you

get an Err 6 the memory has reached

maximum capacity and data must be

deleted to continue..