Tieline VIA Manual de usuario

Users Guide To

Operating the

Tieline VIA

Users Guide To Operating the Tieline VIA

The following instructions are designed for presenters to

guide you through the successful operation of the equipment

for outside broadcasts using the via console combined with

the modems, laptop, headphone mics., USB music sticks and

the BOSE external speaker.

At the end of this guide is a checklist for the equipment and

OH&S requirements.

Note 1: If you do not have power available at the site you will need to make sure

all equipment is fully charged before you commit to the OB.

Note 2: If the weather is inclement you will need to also use the station’s Easy Up

shelter to protect yourself and the equipment.

Step 1. Before you power up the unit, plug in all cables

mics, headphones etc., per the illustrations below

Pic 1. USB modem Pic 2. Left side of the Via Pic 3. Turn the modem on

(Pic 1.) This is the USB modem.

Plug it into USB 1 on the left

hand side of the Via using the

white cable supplied. Ensure

both ends are secured correctly.

(Pic 2.) The left hand side of

the Via, showing where to

plug in.Do not power up

the modem until you have

plugged it in.

(Pic 3.) Press & hold the ON

switch on the top of the

modem for a moment to turn

it on.You should see the lights

start to power up.(No other

connections are required for this side of

the Via.)

Step 2. Plug the headphone / mic units into the front

of the Via.

Plug the headphone / mic units into the

front of the Via. No other connections are

required for the front of the via. If there

is a shared OB and guests are to be

interviewed, 2 other headphone / mics

can be inserted in exactly the same way.

Step 3. Connect the Via to the laptop & the BOSE speaker

Next, connect the XLR cable (3 prongs) from

the Output 1 plug on the right hand side of

the VIA into to the external speaker (BOSE).

When connecting the cables, make sure the

volume knobs on the external speaker are

turned to OFF. That way you won’t send

everyone deaf when you test after powering

up. No other connections required for this side of the Via.

Plug the audio cable (green) 3.5mm stereo

plug into the Stereo Line In 3.5mm plug on

the Via right hand side, also plugging the

other end into the Headphone Out socket on

the laptop. This takes the music feed from

Station Playlist on the laptop into the VIA for

the radio broadcast.

Step 4. Plug the Via, Laptop and External speaker to

the 240 volt power (optional if using battery only)

Using the cables supplied, plug the Via, Laptop and External speaker to the 240 volt power

box and connect to the power outlet. Then you can switch the power on.

(Of course if it is a remote OB using battery in all 3 units this step will not be required.)

The power plug for Via 240 volt connection

Step 5. You Are Ready To Go!

Turn the power on at the 240

volt outlet (if required), then

press the ON button on the

Via holding it down for a

second or two until you see

the activity lights in power up.

Turn on the laptop and the

external speaker, (remember

to make sure the volume levels

are set to zero on the speaker).

Load your USB music

program into Station Playlist

on the Laptop, (the same as

in the Studio) & press Play

Select the AUX IN button on

the Via. You should then see

LED activity in the VU meters

from the laptop audio input

and also adjust the sound

level on the BOSE external

speaker to suit the venue.

(see next step)

Step 5 (cont). You Are Ready To Go!

Now with the External speaker (BOSE)

turned on, slowly increase the volume

knobs on the speaker until you have

reached a comfortable level. warning, if

too high you will get feedback from the mics

when speaking. Good levels will be when

the activity led’s are only clipping into the

orange occasionally.

Before transmitting you can try your mics

and headphones in 1, 2 or 3 inputs as well,

by selecting 1, 2 or 3 input buttons and

adjusting your volume level in the

headphones by turning the green dials 1, 2

or 3 to adjust.

Just adjust the levels whilst talking at a normal level, and

turning the green knob associated with the channel you

are on to set a comfortable listening level.

Step 6. Now we are ready to Talk To The Studio

After powering up, the Via goes into "Power

Save" mode on the screen (it will look like it's

not working).

Press the home button on the top of the Via

and the screen will light up. By this time the

Via would have found the modem and be

ready to connect to the Merlin in the studio.

Just press the Connections tab on the Via

touch screen, you will then be presented

with a screen that asks you to connect

Step 6 (cont). Now we are ready to Talk To The Studio

Touch the Connect tab on the touch

screen and unless there is a problem

you will see a screen that shows a

green dot and you are on-air!

Of course, if you have done Step 5 which asked you

to run some music continually through the laptop to

the Via, the studio should be able to see the LED’s on

the Merlin responding. You can now reset your

playlist in the laptop and stop the music. Now you’re

ready to take over when introduced from the Studio

and enjoy your live On-Air interaction with the public.

Now its time to phone in and check with the

studio to make sure they are receiving the

signal and that all is in readiness for the

handover to the OB unit at the specified time.

Otros manuales para VIA

Tabla de contenidos

Otros manuales de Sistema de conferencias de Tieline

Tieline

Tieline Merlin PLUS Manual de usuario

Tieline

Tieline Genie Distribution Manual de usuario

Tieline

Tieline VIA Manual

Tieline

Tieline VIA Manual de usuario

Tieline

Tieline Bridge-IT Manual de usuario

Tieline

Tieline Genie STL Manual de usuario

Tieline

Tieline Merlin PLUS Manual de usuario

Tieline

Tieline Genie STL Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario