TIC WPS5 Manual de usuario
TIC Wifi Patio Speakers
Featuring TIC WifiStream
multi-room music streaming platform
WPS5
Instruction Manual
1-2-3 Quick Start Guide
1. Connect main and pairing speaker with included
speaker wire. Plug in power adapter to main
speaker.
2. Download TIC WifiStream app from Apple App
Store or Google Play. Follow instruction on TIC
WifiStream app to connect speaker to your Wifi
network.
3. Once connected, install patio speakers in desired
locations. Play music via AirPlay or TIC
WifiStream app.
Content
Main Speaker Pairing Speaker
Power Adapter 15’Speaker Wire
Overview
1. Power Indicator LED
2. Bass Enhancing Sound Port
3. Tweeter
4. Woofer
5. Wifi Connect/Reset Button
6. Speaker Wire Connector
7. Power Adapter Connector
8. Mounting Threads
9. Bracket End Caps
10. 180° Mounting Bracket
Connection
The pairing speaker should be installed at least 5 feet apart but at
most 15 feet from the main speaker (with the included speaker wire).
If the pairing is installed further apart, you need to purchase an
additional speaker wire cable, ideally in thicker gauge (14AWG or
higher) for installation longer than 30 feet apart. Pairing speaker
performance may decline over long distance, especially when using
low-quality speaker wire.
Installation
While not required, we recommend that you first connect the speaker to
your Wifi network before you install the patio speakers in the desired
locations and allow the speakers to reconnect automatically.
Step-by-Step:
1. First determine the locations where the main and pairing speaker will
be installed. The main speaker should be installed close enough to a
suitable power source.
2. Remove the brackets from the speakers by simply unscrewing the
end caps. Secure the brackets to the desired locations with the
appropriate mounting screws/anchors. Please ensure the
appropriate screws/anchors match with the material of the mounting
location and can safely support the weight of the speaker.
3. Once the bracket is securely mounted, attach and install the speakers
by screwing back the end caps. Be sure to adjust the desired angle
before tightening the end caps.
4. Alternatively, the speaker may be installed directly (without the
brackets) with common 3rd party speaker mounts by using the
embedded mounting thread on the back of the speakers.
5. Connect power adapter to the main speaker. Ensure the connector is
screwed in tightly to prevent potential water damage.
6. Plug in power adapter to an electrical outlet. If the outlet is outdoor,
please ensure the connection is covered during use or the adapter is
unplugged when not in use.
7. Connect the speaker wire from the main speaker to the pairing
speaker. Ensure the polarity (Red +/Black -) of the wire matches on
both ends.
Please note the speakers are water-resistant but not water-proof. They are not
designed to be submerged in water. In addition, the front of the speaker should
be pointed at least 5° downward to minimize water pooling on drivers and
entering the sound port. To maximize longevity, the speakers are best installed
under an overhang (or patio, beam, awning, etc.) During periods of prolonged
inactivity and/or extreme weather, we recommend removing the speakers from
the brackets and storing them in a safe indoor space.
Wifi Setup
In order to use this speaker, you must download the
TIC WifiStream app on the Apple App Store or Google
Play. Search for “TIC WifiStream” in the respective
store. Alternatively, follow this QR code (or go to
www.ticcorp.com/wifistream) for download links and
additional help for installation and operation.
The TIC WifiStream app contains step-by-step instruction on how to
connect your speaker to your Wifi network. The supplemental instruction
below is provided for your convenience.
In order to connect the speaker to your Wifi network, your smartphone or
tablet device must be connected to the same network. This speaker is only
compatible with 2.4G band, not 5.8G band. Please ensure you are using
the 2.4G signal for any multi-band router.
During the initial set up, we recommend that you move the speaker close
to the router. While not required, it will provide the fastest and most
seamless set up. However, it is required that the speaker is close to the
phone/tablet you are using during the setup.
Please note the speaker is powered on when the power adapter is plugged
in (as indicated by the blue LED). However, it will take 10-20 seconds to
boot up the system. You will hear a musical phrase once the speaker is
ready to connect and operate.
WifiStream App Operation
Overview
The TIC WifiStream app is required to set up the speakers and
maintain AirPlay capability. Music can be streamed to any
WifiStream device via the app or AirPlay. The app must be
installed on each device that uses the speakers via AirPlay.
Streaming via AirPlay provides the most seamless experience and
the widest range of compatibility. On Apple devices, you can
directly choose the speaker as the output device in most native
media apps/services (ie. Pandora, Apple Music, Amazon Music,
Spotify, YouTube, TuneIn Radio etc.) under the AirPlay icon.
Android devices may take advantage of AirPlay capability via
third-party apps/services. Additional cost may be applied and
service is not guaranteed.
Tabla de contenidos
Otros manuales de Oradores de TIC
TIC
TIC B Series Manual de usuario
TIC
TIC WRS500 Manual de usuario
TIC
TIC AS P25 Manual de usuario
TIC
TIC B Series Manual de usuario
TIC
TIC AS P25 Manual de usuario
TIC
TIC Wireless Speakers Manual de usuario
TIC
TIC TFS14 Manual de usuario
TIC
TIC B Series Manual de usuario
TIC
TIC WRS010 Manual de usuario
TIC
TIC GS Series Manual de usuario
TIC
TIC GS5 Manual de usuario
TIC
TIC B503 Manual de usuario
TIC
TIC TFS10 Manual de usuario
TIC
TIC ASP90 Manual de usuario
TIC
TIC Outdoor Wireless Speakers Manual de usuario
TIC
TIC TFS0 Manual de usuario
TIC
TIC GS5 Manual de usuario
TIC
TIC B503 Manual de usuario
TIC
TIC TFS25 Manual de usuario
TIC
TIC TFS12 Manual de usuario
