THORLABS PM100USB Manual de usuario

Quick Reference

Thorlabs Instrumentation

Optical Power and Energy Meter

PM100USB

2009

Safety Attention 

All statements regarding safety of operation and technical data in

the instruction manual will only apply when the unit is operated

corectly.

The power meter PM100D must not be operated in explosion

endangered environments!

Sensor, photodiode and control inputs and outputs must only be

connected with duly shielded connection cables.

Only with written consent from Thorlabs may changes to single

components be carried out or components not supplied by

Thorlabs be used.

Do not remove covers!

Refer servicing to qualified personal!

1 General Information and Physical Overview

The PM100USB Optical Power and Energy Meter is designed to measure the

optical power of laser light or other monochromatic or near monochromatic light

sources and the energy of pulsed light sources with an external PC that is

connected via USB interface.

The PM100USB is compatible to all Thorlabs “C-Type” Photodiode, Thermal,

Pyroelectric sensors, and custom Photodiode, Thermal and Pyroelectric detectors.

The provided software, including drivers and applications for LabVIEW and C

makes it easy to integrate the instrument in test and measurement systems.

All software and commands are compatible and interchangeable with the PM100D

handheld power and energy meter and with the PM100A handheld optical power

meter.

FrontView RearView

Power / Energy -

Sensor Connecto

USB

Connecto

USB Device is

read

to o

erate

Sensor detected

and ready for

eration

2 Getting Started

2.1 Unpacking

Inspect the shipping container for damage.

If the shipping container seems to be damaged, keep it until you have inspected

the contents and you have inspected the PM100USB mechanically and electrically.

Verify that you have received the following items.

1. PM100USB power/energy meter

2. USB cable, type ‘A’ to ‘mini-B’

3. Quick-start guide

4. USB memory stick with instrument drivers, user application and operation

manual

5. Certificate of Calibration

2.2 Installation and Preparation

1.For proper installing the PM100USB it requires a NI-VISA runtime version on

the PC (available on the National Instruments website www.ni.com or from the

data carrier that comes with the instrument. Allow installing and follow the

dialog instructions.

2.Install the PM100 Utility software from the data carrier. You can chose a

convenient auto-run function of the data carrier by browsing to the folder

‘Autorun’ and executing ‘autorun.exe’.

3.Interlink the USB cable with its male type ‘A’ connector at the PC side and the

‘Mini B’ type connector on the instrument side. The PM100USB gets its opera-

tion power from the PC via the USB cable. When connecting the PM100USB

first time to a PC, sequent a new hardware ‘PM100USB test and measurement

device’ and a ‘DFU device’ will be recognized; please allow installing. After

successful installation the ‘USB LINK’ LED in the rear panel lights up and the

unit is ready to operate.

4.Connect a suitable power or energy sensor. The sensors are ‘hot swappable’

and have a self-fixing mechanism. To plug or unplug a sensor slightly press

from both sides on the pins in the connector housing. After recognizing a valid

sensor and downloading its information and calibration data the ‘SENSOR’ LED

in the rear panel lights up.

5.Run the PM100 Utility software and confirm the connected PM100USB.

For more information, please refer to the detailed user manual that is provided on

the data carrier that shipped with the PM100USB.

3 Addresses

Our Company is represented by several distributors and sales offices throughout

the world.

Europe

Thorlabs GmbH

Hans-Boeckler-Str. 6

D-85221 Dachau

Germany

Sales and Support

Phone: +49 (0) 8131 / 5956-0

Fax: +49 (0) 8131 / 5956-99

Email: [email protected]

Web: www.thorlabs.com

USA

Thorlabs, Inc.

435 Route 206 North

Newton, NJ 07860

USA

Sales and Support

Phone: 1-973-579-7227

Fax: 1-973-300-3600

Email: [email protected]

Web: www.thorlabs.com

Japan

Thorlabs, Inc.

Higashi Ikebukuro Q Building 1st floor

2-23-2, Higashi Ikebukuro, Toshimaku

Tokyo 170-0013

Japan

Sales and Support

Phone: +81-3-5979-8889

Fax: +81-3-5979-7285

Email: [email protected]

Web: www.thorlabs.jp

Please call our hotlines, send an Email to ask for your nearest distributor or just

visit our homepage

http://www.thorlabs.com

19570-D02 Rev B M0009-510-614

Otros manuales para PM100USB

Tabla de contenidos

Otros manuales de Instrumento de medición de THORLABS

THORLABS

THORLABS CCS Series Manual de usuario

THORLABS

THORLABS CCS Series Manual de instrucciones

THORLABS

THORLABS BP209-VIS Manual de usuario

THORLABS

THORLABS PM200 Manual de usuario

THORLABS

THORLABS HNL100R Manual de usuario

THORLABS

THORLABS PM100D Manual de usuario

THORLABS

THORLABS CS20K2 Manual de usuario

THORLABS

THORLABS NR360S Manual de usuario

THORLABS

THORLABS Chromatis Manual de usuario

THORLABS

THORLABS PDA20H Manual de usuario

THORLABS

THORLABS CCS Series Manual de usuario

THORLABS

THORLABS PM160 Manual de usuario

THORLABS

THORLABS HRS015 Manual de usuario

THORLABS

THORLABS ELL10(K) Manual de usuario

THORLABS

THORLABS S1 Series Manual de usuario

THORLABS

THORLABS MCLS Series Manual de usuario

THORLABS

THORLABS PM102 Manual de usuario

THORLABS

THORLABS PM100USB Manual de usuario

THORLABS

THORLABS CVH100-COL Manual de usuario

THORLABS

THORLABS PM320E Manual de usuario

THORLABS

THORLABS GCM102 Manual de usuario

THORLABS

THORLABS INT-MZI Series Manual de usuario

THORLABS

THORLABS upLED Manual de usuario

THORLABS

THORLABS HNLS008R Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario