2-3
2. Safety Precautions
PCT/PC
2. Safety Precautions
Unpacking
zBe careful not to hit your hands or body against protruded parts.
Doing so may injure you, or cause fault or fracture of the product.
zCheck whether the delivered product is the product you ordered.
Using a wrong product may cause malfunction that could lead to injury or fault.
* In the packaging box, an accuracy inspection report is attached.
zCheck whether the product has any fractured parts.
Using a fractured product may cause injury or fault.
* If you find any defect, contact our Sales Division.
Transportation
zDo not drop or hit this product.
Doing so may cause injury or fracture, or a functional loss.
zWhen transporting this product, do not hoist or hold any moving part or the cover.
Doing so may cause the product to fall, leading to injury, or cause fault or fracture of the product.
zWhen transporting this product, do not hoist or hold the motor, sensor or cable.
Doing so may cause the product to fall, leading to injury, or cause fault or fracture of the product.
zWhen hoisting this product, hold the external cylinder/housing/plate/flange part (for
PC) or base/motor bracket/flange part (for PCT). The models whose number is larger
than PC40-06B-0250 are heavy articles (20 kg or more). Two or more people should
hold the product as necessary.
Failure to do so may cause the product to fall, leading to injury, or cause fault or fracture of the product.
* For the weight of the product, see the catalog of press series PCT/PC.
Installation and operation
zFirmly secure this product before operating it.
Failure to do so may cause abnormal operation that could cause injury, fault or fracture.
zRemove the hanger and fixtures for moving part used for transportation before
operating this product.
Failure to do so may cause abnormal operation that could cause injury, fault or fracture.
zPay attention to avoid applying the tension or bending to cables.
Failure to do so may cause abnormal operation that could cause injury, fault or fracture.
zIf anomaly occurs, immediately stop the machine.
Failure to do so may cause abnormal operation that could cause injury, fault or fracture.
zDo not exceed the maximum speed when using the product.
Doing so may cause fault or damage. Or may cause abnormal operation that could lead to injury.
zDo not exceed the torque limit when using the product.
Doing so may cause fault or damage. Or may cause abnormal operation that could lead to injury.
* See “7. Appendix (p.7-16).”
zDo not apply a load that exceeds the permissible level.
Doing so may cause fault or damage. Or may cause abnormal operation that could lead to injury.
* See “7. Appendix (p.7-16).”
zDo not use the failed and broken product.
Doing so may cause injury or machine failure.
zAfter trial run, supply the specified grease to ball spline (only for PC) and ball screw
before using the product.
PC Design Symbol A (standard model) contains THK L500 grease.
PCT (standard product) contains THK AFB-LF grease.
CAUTION
