The Louvre Lounge ShadeTec Manual de usuario
www.louvrelounge.co.nz
ShadeTec Instruction Manual
(4x4m)
CONTENTS
Required Tools & Man Force1.
Parts List2.
Layout3.
Safety Disclaimers4.
Preassembly Tips5.
Installation6.
Remote Setup7.
Foundation Installation8.
Storage & Disposal9.
Maintenance10.
3
4-5
6
7-8
9
10-25
26
15, 16 & 27
28
29
ATTENTION: Read this instruction manual
thoroughly before starting installation.
First of all, thank you for choosing Louvre Lounge to
spice up your outdoor space. Please make sure you've
thoroughly studied the instruction manual before
starting installation.
If you have any questions during the installation
process, please email us at [email protected].
www.louvrelounge.co.nz | 2
REQUIRED TOOLS & MAN FORCE
Man Force
Tools:
Ladder1.
Tape Measure2.
Pencil3.
Spirit Level4.
Rubber Mallet5.
Electric Drill (10mm drill bit)6.
13mm Hex Wrench7.
17mm Hex Wrench8.
We recommend installing the Louvre Lounge with 2-3
people although having a third person would make the
installation quicker.
www.louvrelounge.co.nz | 3
www.louvrelounge.co.nz | 4
PARTS LIST
Before commencing the installation, please confirm all
parts are present. Email us at [email protected]
if you have any issues.
www.louvrelounge.co.nz | 5
PARTS LIST
www.louvrelounge.co.nz | 6
LAYOUT
SAFETY DISCLAIMER'S
WARNING: For the safety of yourself and others, it is
essential to follow all instructions and obey warnings.
Definitions:
This warning triangle calls attention to hazards that
that can lead to death, severe injuries or which are
important for the functioning of the Pergola.
This symbol identifies important notes.
Safety Disclaimer's
To install this pergola technical knowledge is necessary. Do not
install this pergola yourself instead, contact a professional if:
You are unsure if the pergola can be installed in the chosen spot
for installation.
1.
You do not understand the instruction manual or parts of it.2.
You do not have the necessary tools available.3.
You do not have the necessary technical knowledge4.
A minimum of three healthy adults are required to move and install
the pergola as the product is big and heavy. Do not try to install the
pergola alone. If the pergola falls, it could cause serious injuries and
damages! Contact us or a professional for help.
www.louvrelounge.co.nz | 7
Do not install the pergola when you find damaged parts or parts that
are missing. Contact us.
Keep children and pets out of the working area during assembly and
adjustments.
This product and its fixing parts are only suitable for installation on a
plain flat cement pad. If the concrete pad shows cracks or you
require installation on a wooden deck, please consult a professional
before installation.
Nobody is permitted to change the pergolas’ design and structure
without the permission of us (Louvre Lounge Limited)
Nobody is allowed to climb onto the Pergola. Hanging anything on
the Pergola is forbidden.
The sheeting used to protect the paint must be removed after installation. This
structure is a non-permanent structure, the warranty does not cover damage
incurred under extreme weather conditions including heavy rain, high winds or
if exposed to high heat from heaters or BBQs. Please refer to the warranty
policy for more information.
Safety precautions should always be followed when assembling and using this
product to reduce the risk of personal injury and damage to equipment. Never
leave children unattended around/under this pergola. Do not attempt to
assemble or use the pergola in moderate or heavy wind conditions.
Always secure the pergola and keep the louvres open during heavy winds or
extreme weather to avoid damage to the pergola or personal injury.
www.louvrelounge.co.nz | 8
To ensure the optimal placement of the power plug
that supplies the pergola with electricity, it is
recommended that the following guidelines be taken
into consideration:
The motor will be mounted specifically on beam B-1
and B-3. Consequently, the most suitable location for
the plug would be the posts (A-1 and A-4) which are
nearest to the motor mounting point.
www.louvrelounge.co.nz | 9
PREASSEMBLY TIPS
Wiring Placement
This kit includes base plate covers. While not a
mandatory component, the covers offer a neat
appearance once the pergola has been secured to its
foundation. If blinds are intended to be installed, base
plate covers must be installed.
To install, simply slide a post cover along all four
disassembled posts prior to attaching the base plates.
Post Covers
We recommend sealing all gutters with Silicone
sealant to ensure longevity and maximum water
protection.
Silicone Sealant
INSTALLATION
Step 1:
a. Insert the all 6 Base Plate Covers (2) on to each post.
b. Align each Base Plate (3) with the x4 holes on each
post. Fix the Base Plates in place with x4 M8*12 Hex
Screws (4) per post.
www.louvrelounge.co.nz | 10
NOTE: Ensure drainage
holes match that of the
diagram.
NOTE: On posts with plugs, thread through base plate
cover before attaching base plate.
Tabla de contenidos
