The Label Dispensers LD5000 Manual de usuario

02/03

instructions

5000/5100/7000

START International

4270 Airborn Dr.

Addison, TX 75001, USA

Tel 972.248.1999

Fax 972.248.1991

[email protected]

www.startinternational.com

START Japan Corporation

1-26-14 Toshin-Cho

Itabashi-ku

Tokyo, Japan

Tel 81.3.3554.5608

Fax 81.3.5966.9591

[email protected]

CONTENTS

Read this user’s manual before use to ensure proper operation. Keep the manual on

hand for reference in case there is a problem.

Warranty Information .....................2

Features .........................................3

Notes ............................................3

Repair Policy ..................................3

Specifications .................................3

Set-up ............................................4

Operation/Adjustments ...................5

Maintenance ..................................6

Legend ...........................................6

Exploded View ...............................7

Start International warrants all parts on LD series label dispensers against defects in

design, materials and workmanship for a period of 360 days. Labor to replace

defective parts will be performed at no charge for the first 180 days after date of

purchase. Warranty does not cover transportation costs.

Our sole obligation under this warranty is limited to repair, replacement or credit of

the purchase price, at our option, for the machines listed above, which do not

perform properly the function for which they were designed.

Warranty repair is contingent upon our examination and determination that alleged

defects have not been caused by misuse, abuse, improper installation or application,

repair, alteration, accident or neglect in use, storage, transportation or handling.

The above warranty and remedy constitutes Start International’s sole liability

hereunder and are in lieu and exclusive of all other warranties and remedies

expressed, implied, or statutory, including, but not limited to, those of merchantability

and fitness for a particular purpose.

WARRANTY POLICY FOR LD SERIES LABEL DISPENSERS

EXPLODED VIEW

Using 5/32" (4mm) hex wrench, adjust reel holder arm to vertical.

Place the label roll on the 1" (25mm) reel hanger bar.

*If roll has 3" (76.2mm) core, use plastic spool*

Slide reel guide arm onto reel hanger bar to hold roll against reel holder arm to ensure

it is held straight.

(Hex wrench, reel guide arm and spool included.)

Thread the liner under the guide rod, between the hold down and the strip plate, then

back under the strip plate. Lay the liner across the slot in the take-up hub. Slide the lock

rod into the slot to secure the liner. Align shaft guide on guide rod with edge of liner to

keep material feeding straight.

Hold Down:

Using the upper thumbscrew on the side of the label dispenser, adjust the hold down for

tensioning.

For best results, labels should be pressed firmly against the strip plate. If labels are held

too tightly, they will cause excessive drag on the motor.

Photosensor:

The photosensor can be adjusted in any direction to accommodate virtually any label.

Loosening the lower thumbscrew allows the photosensor to swivel and sets the overhang

distance of the label over the strip plate. When the label is being fed the correct

distance, tighten the lower thumbscrew.

Loosen the two screws on the front of the sensor holder to align the photosensor with

the center of the label. If there are two or more labels across, align the photosensor

with the last label to be removed. When these two screws are tightened, the machine

is set.

Hold Down

Photosensor

Strip Plate

Guide Rod

Lock Rod

Take-up Hub

Reel Hanger Bar

Reel Holder Arm

Incorrect

Correct

Sensor sees beyond label

- Will not stop Sensor sees strip plate

- Will not feed

Sensor sees front edge of label

ADJUSTMENTS

SET-UP INSTRUCTIONS

Positioning of Photosensor

MAINTENANCE

Turn the Label Dispenser off when not in use. Remove liner material from take-up hub at

approximately 3" in diameter or if motor appears to be straining. Do not operate

machine without covers in place. Do not operate if inspection reveals a damaged

power or sensor cord.

• Will dispense butt-cut and die-cut material.

• Adjustable photosensor for pinpoint accuracy.

• Handled lock rod makes scrap removal easy.

• No tools required for adjustment.

• Keep strip plate free of adhesive build-up.

• Clean photosensor with compressed air or dry cloth.

• Do not drop the dispenser or subject it to heavy shock.

• Turn off machine when not in use.

Contact START INTERNATIONAL to determine nature of problem.

Furnish START with the following information:

1. Who the unit was purchased from.

2. Model number and serial number.

3. Date purchased (copy of invoice or packing slip required).

START will issue an RGA (Return Goods Authorization) for repair.

Return machine to START by UPS, insured and prepaid.

START will notify the customer if there is a repair charge.

A $25.00 evaluation charge will apply to all non-warranty repairs, which will be

applied to repair charge.

FEATURES

NOTES

REPAIR POLICY

Model# LD5000 LD5100 LD7000

Liner Capacity

Width .25" to 4.5" .25 to 4.5" .25 to 7.0"

(6.35mm to 115mm) (6.35mm to 115mm) (6.35 to 178mm)

Length .125" to 7" .25" to 7" .25" to 7"

(3.2mm to 178mm) (6.4mm to 178mm) (6.4mm to 178mm)

Roll Capacity 12" (30.5cm) 12" (30.5cm) 12" (30.5cm)

Feed Speed 1.3" / sec* 2.6” / sec* 2.6" / sec*

(3.3cm / sec.) (6.6cm / sec.) (6.6cm / sec.)

Dimensions

Inches 10.8 (L) x 10.8 (W) x 14.5 (H) 10.8 (L) x 10.8 (W) x 14.5 (H) 10.8 (L) x 13.2 (W) x 14.5 (H)

Centimeters 27.4 (L) x 27.4 (W) x 36.8 (H) 27.4 (L) x 27.4 (W) x 36.8 (H) 27.4 (L) x 33.5 (W) x 36.8 (H)

Weight 10.5 lb. (4.76 kg.) 10.5 lb. (4.76 kg.) 11.3 lb. (5.12 kg.)

Electrical 117V 50/60Hz, <1 amp

Requirements (220V 50/60Hz available)

SPECIFICATIONS:

*at start-up

LEGEND

Model LD5000 Model LD5100 Model LD7000

Item # Part # Part # Part#

1 LD50008-C LD50008-C LD50008-C

1A LD50008-1 LD50008-1 LD50008-1

1B LD50008-2 LD50008-2 LD50008-2

2 LD50010-C LD50010-C LD50010-C

2A LD50010-1 LD50010-1 LD50010-1

2B LD50010-2 LD50010-2 LD50010-2

3 LD50017-C LD50017-C LD70017-C

3A LD50017-1 LD50017-1 LD50017-1

4 LD50023-A LD50023-A LD50023-A

5 LD-SPOOL LD-SPOOL LD-SPOOL

6 LD50001A LD50001B-A LD50001B-A

6A LD50001-1 LD50001-1 LD50001-1

6B LD50018-2 LD50018-2 LD50018-2

7 LD50013B-A LD50013B-A LD70013B-A

8 LD50012C LD50012-C LD70012-C

8A LD50012-1 LD50012-1 LD50012-1

9 LD50014-1A LD50014-1A LD50014-1A

9A LD50014-4 LD50014-4 LD50014-4

10 LD50014-C LD50014-C LD70014-C

10A LD50017-1 LD50017-1 LD50017-1

11 LD50026D-B LD50026D-B LD70026D-B

11A LD50011-2 LD50011-2 LD50011-2

11B LD50026-1 LD50026-1 LD50026-1

12 LD50026C-A LD50026C-A LD70026C-A

13 LD50015C LD50015-C LD70015-C

13A LD50017-1 LD50017-1 LD50017-1

13B LD50015A LD50015A LD70015A

14 LD50011A LD50011A LD50011A

15 LD50002A LD50002A LD50002A

16 LD50011B-C LD50011B-C LD70011B-C

16A LD50011-2 LD50011-2 LD50011-2

16B LD50011-1 LD50011-1 LD50011-1

17 LD50007-C LD50007-C LD50007-C

18 LD50003 LD50003 LD50003

19 LD50009-D LD50009-D LD70009-D

19A LD50007-1 LD50007-1 LD50007-1

20 LD50021 LD50021 LD50021

20A LD50005-1 LD50005-1 LD50005-1

20B LD50021-1 LD50021-1 LD50021-1

21 LD50019 LD50019 LD50019

21A LD50019F-3 LD50019F-3 LD50019F-3

22 LD50018C LD50018C LD50018C

23 LD50005 LD50005 LD50005

23A LD50005-1 LD50005-1 LD50005-1

23B LD50021-1 LD50021-1 LD50021-1

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario