Texecom W/32XP-W Manual de usuario

Premier Elite 8XP-

W/32XP-W

Wireless Mesh Networking Expander

INS467-9

INS467-9 2/47

Content

1.0 Premier Elite 8XP-W & 32XP-W 3 ............................................................................................

2.0 Ricochet V3.xx and above 4 .....................................................................................................

2.1 System Requirements 6 .........................................................................................................

2.2 System Design Considerations 6 ............................................................................................

3.0 Quick Start Guide 8 ...................................................................................................................

4.0 System Overview 9 ....................................................................................................................

4.1 Mounting the Expander 11 .....................................................................................................

4.2 Wiring 12 ................................................................................................................................

4.3 Selecting an Address 12 .........................................................................................................

4.4 Ricochet Expander Addressing 13 ..........................................................................................

5.0 Programming 14 ........................................................................................................................

5.1 Premier Elite™ V2.10 / 12/24/48/88/168 Ricochet Learn Menu 15 .........................................

5.2 Auto Zone Type & Area 17 .....................................................................................................

5.3 Deleting Devices 17 ...............................................................................................................

5.4 Summary of Keys used 19 ......................................................................................................

5.5 Premier EliteV2.00 - V2.09 24/48/88/168 & 640 + Ricochet V2.xx 19 ....................................

5.6 Premier Elite SmartKey™ 22 ..................................................................................................

5.7 Premier 412/816 V9.5 &V11.10 & Later, Premier 832 2.5 &V4.10 & Later 26 ........................

5.8 Learning Devices directly to the 8XP-W & 32XP-W 30 ............................................................

5.9 Using the Engineers Keypad 30 ..............................................................................................

6.0 Ricochet Diagnostics 30 ...........................................................................................................

6.1 Premier Elite 8XP-W & 32XP-W V3.XX 30 ...............................................................................

6.2 Premier elite V2.XX & later 31 ................................................................................................

6.3 Premier Elite V3.XX / 36 .........................................................................................................

7.0 Modes of Operation 36 .............................................................................................................

7.1 Commission Mode 36 .............................................................................................................

7.2 Device Speciﬁc Functions 37 ..................................................................................................

7.3 Walktest Mode 38 ...................................................................................................................

8.0 System Attributes 39 ................................................................................................................

8.1 Polling 39 ................................................................................................................................

8.2 System Devices 39 .................................................................................................................

8.3 Premier Elite SmartKey™ 41 ..................................................................................................

8.4 Battery Considerations 44 ......................................................................................................

8.5 Premier Elite 8XP-W & 32XP-W Power Loss 44 .......................................................................

9.0 Speciﬁcations 45 ........................................................................................................................

9.1 Electrical 45 ............................................................................................................................

9.2 Physical 45 .............................................................................................................................

9.3 Wireless 46 .............................................................................................................................

9.4 Standards 46 ..........................................................................................................................

9.5 Warranty 47 ...........................................................................................................................

INS467-9 3/47

1.0 Premier Elite 8XP-W & 32XP-W

Texecom has developed a new method of wireless security signalling based on the

concept of mesh networking. Mesh-networking is the process whereby every single

wireless device is capable of receiving and retransmitting any signal from any

other wireless device on the network. The size, scalability and range of the entire

system are extended as wireless signalling is no longer limited by point-to point

communications. The range of a Ricochet® enabled wireless system is greater

than previous systems, with multiple devices capable of relaying messages to and

from even the most remote locations in a building. Each Ricochet enabled device

provides signalling routes to and from control panels. If the wireless

communication between devices weakens, the Ricochet network ‘self-heals’ and

automatically re-routes communications via alternate Ricochet enabled devices.

The reliability of the wireless system increases as more Ricochet devices are

installed. SignalSecurity™ further enhances network reliability with each device

already aware of the number of communication paths available to it.

The 8XP-W & 32XP-W expanders can be used on any premier control panel;

however certain features and functions are dependent on the version of panel

ﬁrmware as detailed in the table below. To determine the ﬁrmware version of your

control panel press N/N 4 on the keypad.

N Firmware versions prior to those listed are NOT compatible.

INS467-9 4/47

2.0 Ricochet V3.xx and above

Premier Elite Series™ control panels with V4.xx ﬁrmware now contains

additional Ricochet V3 capability. This new technology adds new features and

functions for Ricochet enabled security systems.

N DO NOT mix V1 &V2/V3 expanders on the same Premier Elite panel

V3 Expander Diagnostics

V3 expanders have the ability to display diagnostic information about devices.

Please see chapter 6.0 for full details.

V3 Expander & V4 Premier Elite Control Panels

Temperature Readings are available from supported devices

INS467-9 5/47

Expanders can be replaced without the need to relearn devices

This only applies if devices were originally learned to a V4 panel.

V3 Multiple Expander Support

V2 introduced multiple expander support to the system allowing for greater

ﬂexibility in system design, and also taking wireless capability to new levels.

Control Panel Capacity

The table below details the maximum number of expanders, devices and Premier

Elite SmartKey™ that may be used on the diﬀerent control panels, other

conﬁgurations may be possible by mixing Premier Elite 32XP-W & Premier

Elite 8XP-W.

N Premier Elite 32XP-W take 4 address slots on the network, Premier Elite 8XP-W

take one address

INS467-9 6/47

2.1 System Requirements

To enable all of the advanced functionality and diagnostics capability for Ricochet

V3 the following are minimum requirements:-

Wintex™ Version 6.2 Build 4 or later

Ricochet Monitor™ 0.2.18.5.1 or later

Premier Elite™ Series V4.xx or later

Premier Elite™32XP-W & 8-W Expanders V3.xx or later

N Expander ﬁrmware version can be found on the round green sticker located on

the RH side of the PCB.

2.2 System Design Considerations

To ensure correct setup and operation of the Wireless Network it is important that

the following procedures are used when learning and placing devices.

Multiple Expander Systems

When using multiple expanders great care should be taken when designing the

system. Each expander should be treated as its own wireless network; it is not

possible for devices to hop from one wireless network to the other; it is also not

possible for expanders to pass wireless signals from devices not assigned to them

and nor can the expanders talk to each other.

Learning Devices

All devices should be learnt before they are placed in their ﬁnal location. The

expander should be in commission mode, please see chapter 7.1.This will ensure

that they are registered on the receiver or control panel, and that Mesh Networks

and routing are established correctly. Please refer to the relevant section in this

document to Learn Devices to the system.

Learning Premier Elite SmartKey™

Premier Elite SmartKey™ should only be learned AFTER all devices and

INS467-9 7/47

expanders are in their ﬁnal location, this is critical on larger systems where

multiple expanders are being used

N Devices should be at least 30cm’s away but no further than 10m from the

receiver when being learned.

Placing Devices

Once all of the devices have been learnt, they will need placing in their desired

location, this should be done by installing devices closest to the expander ﬁrst and

then working outwards so that the last devices installed are those furthest away

from the expander.

Make sure to install devices with the expander in Commission mode. See chapter

7.1.

Devices also have a commission mode which will indicate a secure and valid path

of communication to the receiver. See chapter 7.1.

N You should wait at least 20 minutes after installing the last device to make sure

routing has been correctly established between all system devices.

N For maximum reliability and system integrity avoid long and thin set-ups. Do

not mount devices on or near metal. Keep devices away from mains electricity

supplies.

N Devices are capable of hopping through up to two other devices, or a maximum

of three hops.

INS467-9 8/47

3.0 Quick Start Guide

INS467-9 9/47

4.0 System Overview

1: Engineers Keypad Connection

An engineer’s keypad (Premier/Elite LCD keypad and interface lead) can be

temporarily plugged onto this connector to allow system programming and testing.

(Functions dependent on Panel ﬁrmware version) Set the keypad address switches

to all on.

2: Network Connection

The + and – terminals provide power whilst the T and R terminals are transmit and

receive data.

3: For Future Use

INS467-9 10/47

4: Comm. Port Connection

Serial communications port for connecting the 8 XP-W & 32XP-W to a PC via PC

Com/USB Com or Com IP/WiFi for use with Ricochet Monitor Software.

5: Lid Tamper

When open puts the system into commission mode and digitally attenuates the

receiver signal by 15Db.

6: Programming/Diagnostic LED’s

Allows programming of devices directly to the receiver, in conjunction with the

learn switch (Legacy mode only). For diagnostic information please see chapter

6.0.

7: Antenna

RF Antenna.

8: Network LED's

Green LED = Data received by the expander from the panel Red LED = Data

transmitted by the expander to the panel. (The ﬂash rate depends on the mode

and RF activity)

9: Heartbeat LED

Flashes steadily to indicate that the receiver is functioning correctly. If the light is

ON or OFF all the time, then there could be a hardware problem.

10: Learn Switch

To be used with programming LED’s to learn devices directly to the receiver.

11: Options Switch

Use to select the receiver functionality depending on panel ﬁrmware.

Switch 1 ON =ﬁrmware dependant, please see the relevant programming section.

Switch 2 ON = Legacy Mode

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Extensor de Texecom

Texecom

Texecom Premier Elite 32XP-W Manual de usuario

Texecom

Texecom premier 60ixd Manual de usuario

Texecom

Texecom Premier Elite 32XP-W Manual de usuario

Texecom

Texecom Premier8XP Manual de usuario

Texecom

Texecom Premier OP16 Manual de usuario

Texecom

Texecom Premier 8X Manual de usuario

Texecom

Texecom Premier Elite 8XP Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario