Texas Instruments TUSB3210 Manual de usuario

TUSB3210 Generic

Evaluation Board

2005 MSP USB

User’s Guide

SLLU031A

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and is

an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and application

solutions:

Products Applications

Amplifiers amplifier.ti.com Audio www.ti.com/audio

Data Converters dataconverter.ti.com Automotive www.ti.com/automotive

DSP dsp.ti.com Broadband www.ti.com/broadband

Interface interface.ti.com Digital Control www.ti.com/digitalcontrol

Logic logic.ti.com Military www.ti.com/military

Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork

Microcontrollers microcontroller.ti.com Security www.ti.com/security

Telephony www.ti.com/telephony

Video & Imaging www.ti.com/video

Wireless www.ti.com/wireless

Mailing Address: Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION

PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided

may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective

considerations, including product safety measures typically found in the end product incorporating the goods.

As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic

compatibility and therefore may not meet the technical requirements of the directive.

Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products

received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction

of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic

discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM

User’s Guide prior to handling the product. This notice contains important safety information about temperatures

and voltages. For further safety concerns, please contact the TI application engineer.

Persons handling the product must have electronics training and observe good laboratory practice standards.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of 4 V to 6 V and the output

voltage range of 3 V to 3.6 V.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than

50°C. The EVM is designed to operate properly with certain components above 50°C as long

as the input and output ranges are maintained. These components include but are not limited

to linear regulators, switching transistors, pass transistors, and current sense resistors. These

types of devices can be identified using the EVM schematic located in the EVM User’s Guide.

When placing measurement probes near these devices during operation, please be aware

that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Related Documentation From Texas Instruments

Preface

Read This First

About This Manual

This user’s guide describes the setup and operation of the TUSB3210 generic

evaluation board. Familiarity with universal serial bus (USB) protocol and

common laboratory testing equipment is required and assumed throughout

this user’s guide.

How to Use This Manual

This document contains the following chapters:

-Chapter 1—Hardware and Software Required

-Chapter 2—EVM Operation

Related Documentation From Texas Instruments

-TUSB3210 Literature No. SLLS466

-TPS76333 Literature No. SLVS181

-TPS2042 Literature No. SLVS173

-MAX232 Literature No. SLLS047

-MAX3232 Literature No. SLLS410

-Bootcode Literature No. SLLU025

These files are available from Texas Instruments; contact technical support for

assistance.

Trademarks

MacOS is a trademark of Apple Computer, Inc.

Windows and Windows ME are trademarks of Microsoft Corporation.

Other trademarks are the property of their respective owners

FCC Warning

This equipment is intended for use in a laboratory test environment only. It gen-

erates, uses, and can radiate radio frequency energy and has not been tested

for compliance with the limits of computing devices pursuant to subpart J of

part 15 of FCC rules, which are designed to provide reasonable protection

against radio frequency interference. Operation of this equipment in other en-

vironments may cause interference with radio communications, in which case

the user at his own expense will be required to take whatever measures may

be required to correct this interference.

Contents

vii

Contents

1 Hardware and Software Required 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Equipment 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Hardware Overview 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Bill of Materials 1-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Schematic Diagram 1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 EVM Operation 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 TUSB3210 Setup 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Interfaces and USB Port 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Power Supplies 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4 Light Emitting Diodes (LEDs) 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.5 Jumpers and Switches 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.6 EEPROM 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.7 GPIO Connector 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figures

1−1 TUSB3210 Evaluation Equipment 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1−2 TUSB3210 Evaluation Board 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1−3 TUSB3210 EVM Connected to a Compact Flash Daughterboard 1-3. . . . . . . . . . . . . . . . . . . .

1−4 TUSB3210 Printed-Circuit Board (REV 1.1)—Top Side 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1−4 TUSB3210 Printed-Circuit Board (REV 1.2)—Top Side 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2−1 GPIO Connector 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

2−1 LED Description 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2−2 Jumpers and Switches 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

viii

1-1

Chapter Title—Attribute Reference

Hardware and Software Required

The TUSB3210 generic EVM is designed for use with a personal computer

running a USB-enabled operating system. The PC should be USB 1.1

specification compliant. This implies that the BIOS, chipsets, and operating

system are all USB 1.1 specification compliant. If the BIOS is not specification

compliant, the system may not boot up when USB devices are connected at

power up, and the EVM may not function. Note that an ac/dc power supply

adapter is optional equipment (but included), because the EVM can function

in either bus-powered mode or self-powered mode.

Topic Page

1.1 Equipment 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Hardware Overview 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Bill of Materials 1-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Schematic Diagram 1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

Running Title—Attribute Reference

1-2

1.1 Equipment

Figure 1−1. TUSB3210 Evaluation Equipment

USB EVM

1.2 Hardware Overview

The TUSB3210 EVM hardware platform is 11 cm wide by 13 cm long.

Throughout this document, text inside of parenthesis (ex.) denotes reference

designators found on the TUSB3210 EVM. See Figure 1−2 for a photograph

of the EVM. All jumpers are installed with the factory settings. See the jumper

table for a description of settings, and make any required adjustments before

using the EVM.

The TUSB3210 EVM design allows great evaluation flexibility and provides a

platform that is practical and easy to use. The EVM runs on a 12-MHz crystal

and uses an I2C EEPROM. The EVM is set up for bus-powered operation

using a 5-V to 3.3-V voltage regulator. The UART port is disabled. The

firmware installed in the EEPROM allows USB HID-class-enabled operating

systems such as Windows98, Windows 2000, Windows ME, and

MacOSto directly access it like a keyboard, although it does not have one.

Reference firmware is installed and the source code is available to

developers. The RS-232 port is available for monitoring 8052 MCU activity for

debugging purposes. The port uses a one-to-one serial port cable instead of

a null modem. Several test points have been added to the EVM for probing.

Carefully review all setting changes prior to powering the EVM, as improper

use could result in damage to some of the EVM components.

This EVM is generic in the sense that it provides a 50-pin connector that allows

access to the GPIO pins of the TUSB3210. It is meant to be used with another

application-specific daughterboard that connects to the 50-pin connector. An

example of such a daughterboard is shown in Figure 1−3. Users are

responsible for developing their own application firmware for the target

hardware device. LED (D4) provides power and suspend status to the

Otros manuales para TUSB3210

Tabla de contenidos

Otros manuales de Placa madre de Texas Instruments

Texas Instruments

Texas Instruments bq20z70EVM-001 Manual de usuario

Texas Instruments

Texas Instruments ADS1625 EVM Manual de usuario

Texas Instruments

Texas Instruments TPS65680 Manual de usuario

Texas Instruments

Texas Instruments bqTESLA bq500414Q Manual de usuario

Texas Instruments

Texas Instruments AN-1975 LMP8640 Manual de usuario

Texas Instruments

Texas Instruments LMX2572EVM Manual de usuario

Texas Instruments

Texas Instruments DRV824x-Q1EVM Manual de usuario

Texas Instruments

Texas Instruments TPS53015 Manual de usuario

Texas Instruments

Texas Instruments DLP471TEEVM Manual de usuario

Texas Instruments

Texas Instruments LMK04906 Series Manual de usuario

Texas Instruments

Texas Instruments IWR1443BOOST Manual de usuario

Texas Instruments

Texas Instruments UCC3817-EVM Manual de usuario

Texas Instruments

Texas Instruments TPS7A3301EVM-061 Manual de usuario

Texas Instruments

Texas Instruments TPS6030 EVM-170 Series Manual de usuario

Texas Instruments

Texas Instruments TPS92612-Q1 Manual de usuario

Texas Instruments

Texas Instruments LAUNCHXL-F280025C Guía del administrador

Texas Instruments

Texas Instruments SWIFT TPS561201EVM-896 1-A Manual de usuario

Texas Instruments

Texas Instruments UA78LEVM-075 Manual de usuario

Texas Instruments

Texas Instruments BQ20Z40EVM-001 Manual de usuario

Texas Instruments

Texas Instruments DRV5011-5012EVM Manual de usuario

Texas Instruments

Texas Instruments ADS8910BEVM-PDK Manual de usuario

Texas Instruments

Texas Instruments DRV814x-Q1EVM Manual de usuario

Texas Instruments

Texas Instruments SmartRF CC900DBK Manual de programación

Texas Instruments

Texas Instruments FDC1004EVM Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario