Texas Instruments THS6132EVM Manual de usuario

THS6132EVM

November 2002 High Performance Linear Products

User’s Guide

SLOU154

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION

PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided

may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective

considerations, including product safety measures typically found in the end product incorporating the goods.

As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic

compatibility and therefore may not meet the technical requirements of the directive.

Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products

received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction

of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic

discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive.

TI assumesno liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM

User’s Guide prior to handling the product. This notice contains important safety information about temperatures

and voltages. For further safety concerns, please contact the TI application engineer.

Persons handling the product must have electronics training and observe good laboratory practice standards.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the specified input and output ranges described in

the EVM User’s Guide.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than

60°C. The EVM is designed to operate properly with certain components above 60°C as long

as the input and output ranges are maintained. These components include but are not limited

to linear regulators, switching transistors, pass transistors, and current sense resistors. These

types of devices can be identified using the EVM schematic located in the EVM User’s Guide.

When placing measurement probes near these devices during operation, please be aware

that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Information About Cautions and Warnings

Preface

Read This First

Information About Cautions and Warnings

This book may contain cautions and warnings.

This is an example of a caution statement.

A caution statement describes a situation that could potentially

damage your software or equipment.

This is an example of a warning statement.

A warning statement describes a situation that could potentially

cause harm to you.

The information in a caution or a warning is provided for your protection.

Please read each caution and warning carefully.

FCC Warning

This equipment is intended for use in a laboratory test environment only. It gen-

erates, uses, and can radiate radio frequency energy and has not been tested

for compliance with the limits of computing devices pursuant to subpart J of

part 15 of FCC rules, which are designed to provide reasonable protection

against radio frequency interference. Operation of this equipment in other en-

vironments may cause interference with radio communications, in which case

the user at his own expense will be required to take whatever measures may

be required to correct this interference.

Trademarks

Electrostatic Sensitive Components

This EVM contains components that can potentially be damaged by

electrostatic discharge. Always transport and store the EVM in its

supplied ESD bag when not in use. Handle using an antistatic

wristband. Operate on an antistatic work surface. For more

information on proper handling, refer to SSYA008.

Related Documentation From Texas Instruments

The URL’s below are correct as of the date of publication of this manual. Texas

Instruments applications apologizes if they change over time.

-THS6132 data sheet (SLLS543)

-Application report (SLMA002), PowerPAD Thermally Enhanced Package,

http://www-s.ti.com/sc/psheets/slma004/slma002.pdf

-Application report (SLMA004), PowerPAD Made Easy,

http://www-s.ti.com/sc/psheets/slma004/slma004.pdf

-Application report (SSYA008), Electrostatic Discharge (ESD),

http://www-s.ti.com/sc/psheets/ssya008/ssya008.pdf

-Application report (SLOA100), Active Output Impedance for ADSL Line

Drivers, http://www-s.ti.com/sc/psheets/sloa100/sloa100.pdf

Trademarks

PowerPAD is a trademark of Texas Instruments.

Contents

vii

Contents

1 Introduction and Description 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Evaluation Module Features 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 THS6132EVM Operating Conditions 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 EVM Default Configuration 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Using the THS6132EVM 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 THS6132EVM Applications 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Standard Gain Configuration 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Active Termination 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3 Receive Path Implementation 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4 High-Pass Filter 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.5 Single-Ended to Differential Conversion 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.6 Single-Ended Gain Stages 3-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 EVM Hardware Description 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

viii

Figures

1-1 Full Schematic of the Populated Circuit on the THS6132EVM (Default Configuration) 1-3. .

2-1 Interconnection Diagram 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1 Default Configuration Operation 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2 Differential Positive Feedback 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-3 Implementation of the Receive Signal Path 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-4 ADSL Spectrum and High-Pass Filter Response 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-5 Single-Ended Amplifier Configuration 3-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-1 Top Layer 1 (Signals for THS6132EVM) 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-2 Internal Plane (Layer 2) (Ground 1 Plane) 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-3 Internal Plane (Layer 3) (Power Plane) 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-4 Bottom (Layer 4) (Ground and Signal) 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

4-1 THS6132EVM Bill of Material 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-2 THS6132EVM Bill of Material for Items 25 and 26 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

Introduction and Description

The Texas Instruments THS6132 evaluation module (EVM) helps designers

evaluate the performance of the THS6132 operational amplifier. Also, this

EVM is a good example of high-speed PCB design.

Two packages of the THS6132, THS6132PWP, and THS6132RGU, are

supported by this EVM. The schematics and the bill of materials indicate any

differences associated with the two packages.

This document details the THS6132EVM. It includes a list of EVM features, a

brief description of the module illustrated with a series of schematic diagrams,

EVM specifications, details on connecting and using the EVM, and a

discussion of high-speed amplifier design considerations.

This EVM enables the user to implement various circuits to clarify the available

configurations presented by the schematic of the EVM. The user is not limited

to the circuit configurations presented. The EVM provides enough hardware

hooks that the only limitation should be the creativity of the user.

Topic Page

1.1 Evaluation Module Features 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 THS6132EVM Operating Conditions 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 EVM Default Configuration 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

Evaluation Module Features

1-2

1.1 Evaluation Module Features

The THS6132EVM provides a platform for developing high-speed operational

amplifier application circuits. It contains the THS6132 high-speed dual

operational amplifier, a number of passive components, and various features

and footprints that enable the user to experiment with, test, and verify various

operational amplifier circuit implementations. The PC board measures 4.21 by

3.01 inches. THS6132 high-speed operational amplifier EVM features include:

-Active termination capability (R3 and R12)

-Snubber circuit (R1 and C1), for use with active termination

-Hooks for a receive path signal (TP1 through TP4)

-Noninverting gain configuration for DSL

-High-pass filter (HPF) function for ADSL (C2 and R23)

-Short-loop length for the power supply differential high-frequency path

(C12, C14)

1.2 THS6182EVM Operating Conditions

Supply voltage range, ±VCC ±5 to ±15 Vdc (see the device data sheet)

Supply current, ICC (see the device data sheet)

For complete THS6132 amplifier IC specifications, parameter measurement

information, and additional application information, see the THS6132 data

sheet (SLLS543).

1.3 EVM Default Configuration

As delivered, the EVM has a fully functional example circuit, requiring added

power supplies, a signal source, and monitoring instrument. See Figure 1-1

for the complete EVM schematic.

The default configuration has a differential gain of 2.22, as determined by R2,

R23, and R11 in combination with series matching resistors R6, R7, R15, and

R16, and a 50-Ωload on the outputs at J1 and J3.

Some components such as R20, R21, R24–R29, C3–C12, FB1, FB2, JP1,

JP2, J5–J9, and TP8–TP10, etc., are omitted on the application schematics

of Chapter 3 for clarity.

Tabla de contenidos

Otros manuales de Placa madre de Texas Instruments

Texas Instruments

Texas Instruments ADS7043EVM-PDK Manual de usuario

Texas Instruments

Texas Instruments AFE7222EVM Manual de usuario

Texas Instruments

Texas Instruments TLV751-EVM Manual de usuario

Texas Instruments

Texas Instruments THS4601EVM Manual de usuario

Texas Instruments

Texas Instruments DRV632EVM Manual de usuario

Texas Instruments

Texas Instruments TSW12D1620 Manual de usuario

Texas Instruments

Texas Instruments DRV2605 Manual de usuario

Texas Instruments

Texas Instruments TPA032D01 Manual de usuario

Texas Instruments

Texas Instruments ADC14X250EVM Manual de usuario

Texas Instruments

Texas Instruments TPS552882EVM-400kHZ Manual de usuario

Texas Instruments

Texas Instruments TLV767EVM-014 Manual de usuario

Texas Instruments

Texas Instruments MSP430FR6043 Manual de usuario

Texas Instruments

Texas Instruments DEM-PCM2912 EVM Manual de usuario

Texas Instruments

Texas Instruments TPS7H2211EVM Manual de usuario

Texas Instruments

Texas Instruments TMS320C5 Series Manual de usuario

Texas Instruments

Texas Instruments ADS7861 EVM Manual de usuario

Texas Instruments

Texas Instruments TUSB320 Manual de usuario

Texas Instruments

Texas Instruments TRS3232RGTEVM Manual de usuario

Texas Instruments

Texas Instruments TVP7000EVM Manual de usuario

Texas Instruments

Texas Instruments TMAG5328 Manual de usuario

Texas Instruments

Texas Instruments LMR36506RREVM Manual de usuario

Texas Instruments

Texas Instruments DRV8701EVM Manual de usuario

Texas Instruments

Texas Instruments DACx760EMC-EVM Manual de usuario

Texas Instruments

Texas Instruments DLP LightCrafter Display 3010 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario