Texas Instruments 66AK2Gx Manual de usuario

Este manual sirve para los siguientes modelos

1

Otros manuales de Placa madre de Texas Instruments

Texas Instruments

Texas Instruments TUSB8040AEVM Manual de usuario

Texas Instruments

Texas Instruments TPS7A21EVM-059 Manual de usuario

Texas Instruments

Texas Instruments TPS7H4010EVM Manual de usuario

Texas Instruments

Texas Instruments DUAL-DIYAMP-EVM Manual de usuario

Texas Instruments

Texas Instruments bq27531EVM Manual de usuario

Texas Instruments

Texas Instruments ADC32RF-EVM Series Manual de usuario

Texas Instruments

Texas Instruments bq76PL536A Manual de usuario

Texas Instruments

Texas Instruments TPD1E01B04 Manual de usuario

Texas Instruments

Texas Instruments LMR38020EVM Manual de usuario

Texas Instruments

Texas Instruments ADS8028EVM-PDK Manual de usuario

Texas Instruments

Texas Instruments ADS8350EVM-PDK Manual de usuario

Texas Instruments

Texas Instruments TPS7A14EVM Manual de usuario

Texas Instruments

Texas Instruments TIDA-050038 Guía

Texas Instruments

Texas Instruments SN74AVC2T244EVM Manual de usuario

Texas Instruments

Texas Instruments AMC131M03EVM Manual de usuario

Texas Instruments

Texas Instruments OMAP-L137 EVM Manual de usuario

Texas Instruments

Texas Instruments LMG342XEVM-04X Manual de usuario

Texas Instruments

Texas Instruments BQ76952EVM Manual de usuario

Texas Instruments

Texas Instruments ADS79 EVM Series Manual de usuario

Texas Instruments

Texas Instruments SN74AXC4T774 Manual de usuario

Texas Instruments

Texas Instruments INA228 Manual de usuario

Texas Instruments

Texas Instruments TMAG5115 Manual de usuario

Texas Instruments

Texas Instruments TUSB217EVM Manual de usuario

Texas Instruments

Texas Instruments TPS40345EVM-353 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario

Demonstrating

U-Boot from SPI/QSPI for 66AK2G

SPI

Master

SPI

Slave

Quad-SPI

Master

SPI

Slave

K2G EVM Console capture SPI NOR boot configuration

To tftp get the prebuilt .gph file to the EVM memory, set up the tftp server and

configure serverip and tftp_root of the u-boot environment variables:

=> setenv serverip 158.218.109.194

=> setenv tftp_root psdk4209-keg

Once these are set up and in u-boot prompt, run the u-boot script get_uboot_net

to retrieve the file, and burn_uboot_spi to program the NOR flash:

=> run get_uboot_net

=> run burn_uboot_spi

K2G GP EVM Technical Reference Manual

http://www.ti.com/lit/sprui65a

K2G EVM Console Capture QSPI configuration

To retrieve the MLO from SD card, be sure the mmc is responding by

rescanning it. Then, load the MLO file from mmc with fatload command.

=> mmc rescan

=> fatload mmc 0 ${loadaddr} MLO

To retrieve the file from network, the tftp server needs to be set up, and

the serverip and ipaddr of the u-boot environment variables need to be

set. Then, tftp the prebuilt MLO file from the tftp server.

=> setenv serverip tftp.server.ip.addr

=> setenv ipaddr evm.ip.addr

=> tftp ${loadaddr} ${serverip}:psdk4209-k2g/MLO-k2g-evm

K2G GP EVM Technical Reference Manual

http://www.ti.com/lit/sprui65a

K2G EVM Console capture: Kernel boot

In this example, the network boot is used with an NFS-mounted

filesystem. With this kernel boot option, the u-boot environment

variables boot, serverip, nfs_root, and tftp_root need to be

configured:

=> setenv boot net

=> setenv serverip 158.218.109.194

=> setenv nfs_root /nfs/nfs_fs1

=> setenv tftp_root psdk4209-keg

Once configured, the system will be able to boot to the kernel prompt.

For More Information

•66AK2x Multicore DSP + ARM Processors:

http://www.ti.com/processors/dsp/c6000-dsp-arm/66ak2x/overview.html

•Processor SDK for 66AK2Gxx Processor:

http://www.ti.com/tool/processor-sdk-K2G

•Evaluation Modules for the 66AK2Gxx User’s Guide (TRM):

http://www.ti.com/lit/sprui65

•Processor SDK U-boot User’s Guide:

http://processors.wiki.ti.com/index.php/Linux_Core_U-Boot_User%27s_Guide

•For questions about this training, refer to the E2E Community Forums for Sitara

Processors at http://e2e.ti.com/support/arm/sitara_arm/f/791/t/277411