Texas Instruments Arrow IoT Manual de usuario

Arrow IoT Seminar

LAB MANUAL

Arrow IoT Seminar

Revision 2.4

September 2014

Important Notice

ii Arrow IoT Seminar - Introduction

Important Notice

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or

to discontinue any product or service without notice, and advise customers to obtain the latest

version of relevant information to verify, before placing orders, that information being relied on is

current and complete. All products are sold subject to the terms and conditions of sale supplied at

the time of order acknowledgment, including those pertaining to warranty, patent infringement,

and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time

of sale in accordance with TI’s standard warranty. Testing and other quality control techniques

are utilized to the extent TI deems necessary to support this warranty. Specific testing of all

parameters of each device is not necessarily performed, except those mandated by government

requirements.

Customers are responsible for their applications using TI components.

In order to minimize risks associated with the customer’s applications, adequate design and

operating safeguards must be provided by the customer to minimize inherent or procedural

hazards.

TI assumes no liability for applications assistance or customer product design. TI does not

warrant or represent that any license, either express or implied, is granted under any patent right,

combination, machine, or process in which such semiconductor products or services might be or

are used. TI’s publication of information regarding any third party’s products or services does not

constitute TI’s approval, warranty or endorsement thereof.

Revision History

May 2014 – Revision 1.0

July 2014 – Revision 2.0

July 2014 – Revision 2.1

August 2014 – Revision 2.2

August 2014 – Revision 2.3

September – Revision 2.4

Mailing Address

Texas Instruments

Training Technical Organization

6500 Chase Oaks Blvd Building 2

M/S 8437

Plano, Texas 75023

Arrow IoT Seminar - CC3200 Tools Setup 1 - 1

CC3200 Tools Setup

Introduction

There are two main sections to this lab:

1. Pre-work to be completed prior to the seminar.

2. Final lab steps to install the CC3200 LaunchPad driver.

The pre-work includes downloading and installing several software packages from the Texas

Instruments website. It also includes the steps to import and build some Code Composer Studio

projects that are needed for the CC3200 software examples in the Software Development Kit

(SDK).

The final steps of the lab require you to plug in a CC3200 LaunchPad board. Since you will

receive this board at the seminar, this section of the lab will be performed at the seminar.

Timing

The pre-work for this lab should take from 45-60 minutes to complete, depending on the speed of

your internet connection. The final steps at the workshop should take only 5-10 minutes, once

you receive your CC3200 LaunchPad board.

Prerequisites

To run these labs you will need a Microsoft® Windows® 7 laptop with a good internet connection.

Optional: Android or iOS smartphone to install SimpleLink Wi-Fi Starter application

CC3200 Software Development Kit (SDK)

1 - 2 Arrow IoT Seminar - CC3200 Tools Setup

Chapter Topics

CC3200 Tools Setup ................................................................................................................... 1-1

CC3200 Software Development Kit (SDK) ............................................................................... 1-3

SimpleLink Wi-Fi Starter Application......................................................................................... 1-4

Install Arrow IoT Seminar Files ................................................................................................. 1-6

Install Code Composer Studio (CCS) ....................................................................................... 1-7

Import and Build Four Essential CCS

Projects

....................................................................1-10

Set the Default Target Configuration ..................................................................................1-14

Configure the CC3200 LaunchPad Board ................................................................................ 1-16

Check CC3200 LaunchPad Jumpers.................................................................................. 1-16

Install USB Driver................................................................................................................1-17

Trouble Installing FTDI Drivers? .........................................................................................1-19

Summary.............................................................................................................................1-19

CC3200 Software Development Kit (SDK)

Arrow IoT Seminar - CC3200 Tools Setup 1 - 3

CC3200 Software Development Kit (SDK)

1. Download the CC3200 SDK version 0.5.2. The seminar labs are built with the version of

the SDK. There may be later versions available, but this is the version you will need for

the seminar.

► Go to:

http://software-dl.ti.com/dsps/forms/self_cert_export.html?prod_no=CC3200SDK-0.5.2-

windows-installer.exe&ref_url=http://software-dl.ti.com/ecs/cc31xx/sdk/cc3200_sdk_v0_5_2

► You must fill in the U.S. Government export approval fields to download this software. This

will be the same procedure for several of the software packages you will need.

2. Install the CC3200 SDK

► Run the installer and choose the default installation folder c:\ti\CC3200SDK

Note: ► If you already have the CC3200 SDK installed, this installer will over-write your current

installation. If you have made any edits/additions to the SDK files, you should re-name

your current installation folder.

SimpleLink Wi-Fi Starter Application

1 - 4 Arrow IoT Seminar - CC3200 Tools Setup

SimpleLink Wi-Fi Starter Application

If you have an Android or iOS device, download and install the “SimpleLink Wi-Fi Starter

Application” from the App Store or Google Play. This application allows you to configure the

CC3200s Wi-Fi network information for the first time, using Smart Config (the first tab). A second

tab shows you a list of devices that are connected to the Wi-Fi network. A third tab lets you set

options to show or hide device information.

3. Download and install the application to your Android or iOS Device

► Using your Android or iOS device browser, go to http://www.ti.com/tool/wifistarter and click

on the appropriate download link (App Store or Google Play)

Note that you can also download the source code for either application from this page but you

won’t need that for the seminar.

SimpleLink Wi-Fi Starter Application

Arrow IoT Seminar - CC3200 Tools Setup 1 - 5

► For the Android app you will see this. Click on the INSTALL button to install.

► For the iOS app you will see this. Click on the INSTALL button to install. Note: In this

screenshot, the app was already installed, so you see the OPEN button instead.

Install Arrow IoT Seminar Files

1 - 6 Arrow IoT Seminar - CC3200 Tools Setup

Install Arrow IoT Seminar Files

4. Download the Arrow IoT Seminar Installer

► Go to http://processors.wiki.ti.com/index.php/Arrow_IoT_Seminar_2014 and click on the

Arrow IoT Seminar Installer download link.

5. Run the Arrow IoT Seminar Installer

► Run the installer and choose the default installation folder c:\Arrow_IoT_Seminar

This will install the project files we’ll use in the seminar, along with some documentation files.

Install Code Composer Studio (CCS)

Arrow IoT Seminar - CC3200 Tools Setup 1 - 7

Install Code Composer Studio (CCS)

6. Download Code Composer Studio (CCS) version 6.0.1.00040 or later

► Go to http://processors.wiki.ti.com/index.php/Category:Code_Composer_Studio_v6 and

click on the Windows Download link.

7. Install CCS

► Run the installer program and when prompted for Processor Support, select “SimpleLink

Wireless MCUs”. For the remaining options, select the default values. You should also

temporarily turn off your anti-virus software for this installation. The installation time is

typically 20 minutes, but can vary based on internet connection speed. If you are using

additional processors you can install those as well.

Hint: If you previously installed CCS version 6.0.1.00040 (or later) and you do NOT yet

have SimpleLink Wireless MCUs support installed, you have two choices:

1. We recommend that you re-install CCS. You can just delete or rename the

c:\ti\ccsv6 folder, and then re-install CCS with the processor support you need,

including the Wireless Connectivity MCUs. This has the advantage of giving you a

clean installation, and might be more reliable than the next option.

2. You can keep your current installation, and just install the Wireless Connectivity

MCU support on top of your existing CCS. With CCS v6, this seems to work in most

cases. You can’t remove existing installed processor support very easily, but it is

possible to add new support. Simply run the installer and check the box for Wireless

Connectivity MCUs.

NOTE:

This is the only processor

support used in the seminar,

although you can choose

others if you need them.

You can also install other

processors later if needed.

Install Code Composer Studio (CCS)

1 - 8 Arrow IoT Seminar - CC3200 Tools Setup

Note: The link we showed in the previous step is for the “online” installer. If you have any

problems installing using this link, you can try downloading a zip file of the full “Off-line”

installer from:

http://processors.wiki.ti.com/index.php/Download_CCS#Code_Composer_Studio_Version_6_Downloads.

Should you decide to download this zip file, you should un-zip the file to a folder before

running the installer.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Microcontrolador de Texas Instruments

Texas Instruments

Texas Instruments MSPM0L1306 Manual de usuario

Texas Instruments

Texas Instruments SimpleLink CC2650 Manual de usuario

Texas Instruments

Texas Instruments TDP0604 Manual de usuario

Texas Instruments

Texas Instruments Serial Programming Adapter MSP430 Manual de usuario

Texas Instruments

Texas Instruments Chipcon Products CC2400DK Manual de usuario

Texas Instruments

Texas Instruments TMS320F280039C Manual de usuario

Texas Instruments

Texas Instruments TMS320F28004x Manual del producto

Texas Instruments

Texas Instruments TMS320F2807 Series Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

Texas Instruments

Texas Instruments CC3220-LAUNCHXL Manual de usuario

Texas Instruments

Texas Instruments MSP430F5638 Manual de usuario

Texas Instruments

Texas Instruments MSP430F6775 Manual de usuario

Texas Instruments

Texas Instruments SimpleLink CC2652RB Manual de usuario

Texas Instruments

Texas Instruments TPS65910 EVM Manual de usuario

Texas Instruments

Texas Instruments TMUX646EVM Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

Texas Instruments

Texas Instruments DRV2605L Manual de usuario

Texas Instruments

Texas Instruments LaunchPad MSP430G2553 Manual de usuario

Texas Instruments

Texas Instruments LaunchPad LP-EM-CC2340R5 Manual de usuario

Texas Instruments

Texas Instruments CC3235 SimpleLink Series Manual del producto

Texas Instruments

Texas Instruments MSP432 Manual de usuario

Texas Instruments

Texas Instruments MSP430FG6626 Manual de usuario

Texas Instruments

Texas Instruments BoosterPack BOOSTXL-RS232 Manual de usuario

Texas Instruments

Texas Instruments MSP430F6748 Manual de usuario

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario

Silicon Laboratories

Silicon Laboratories C8051F800 Manual de usuario

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manual de usuario

Mikroe

Mikroe click Proximity 2 Manual de usuario