Texas Instruments 430BOOST-TMP006 BoosterPack Manual de usuario

430BOOST-TMP006 BoosterPack

User's Guide

Literature Number: SLAU440

June 2012

Contents

1 430BOOST-TMP006 BoosterPack Overview ............................................................................ 3

1.1 Overview .................................................................................................................. 3

2 TMP006 Information ............................................................................................................ 4

2.1 TMP006EVM ............................................................................................................. 4

3 Getting Started ................................................................................................................... 4

3.1 Requirements ............................................................................................................ 4

3.2 Configuring LaunchPad ................................................................................................. 4

3.3 Connecting Hardware ................................................................................................... 5

4 Obtaining Software Packages ............................................................................................... 5

4.1 Re-Downloading or Modifying Firmware ............................................................................. 5

4.2 Installing BoosterPack GUI ............................................................................................. 5

4.3 Starting The Demo Application ........................................................................................ 5

5 User Experience Application ................................................................................................ 6

5.1 Data Sampling Mode .................................................................................................... 6

5.2 Data Logging Mode ..................................................................................................... 8

6 API Guide ........................................................................................................................... 9

6.1 Summary of API Functions ............................................................................................. 9

7 References ......................................................................................................................... 9

8 Schematics ....................................................................................................................... 10

2Table of Contents SLAU440–June 2012

Submit Documentation Feedback

Toggles between Data Streaming Mode

and Data Logging Mode

LED On – Data Streaming Mode

LED Off – Data Logging Mode

TMP006EVM

Recalibrate the temperature

reading to current room temperature

Red LED – Indicates warmer

than calibrated value

Green LED – Indicates colder

than calibrated value

User's Guide

SLAU440–June 2012

430BOOST-TMP006 BoosterPack

1 430BOOST-TMP006 BoosterPack Overview

1.1 Overview

The 430BOOST-TMP006 BoosterPack provides a quick and low-cost solution to evaluate and develop

with the TMP006 contactless temperature sensor. To quickly get started, this BoosterPack comes with a

pre-loaded firmware for MSP430G2553 device. The software ecosystem also provides fully commented

source code for customers to get started with developing their application.. A GUI is also available for

interaction with the BoosterPack. See Figure 1 for an overview of the BoosterPack hardware.

Figure 1. 430BOOST-TMP006 BoosterPack Overview

SLAU440–June 2012 430BOOST-TMP006 BoosterPack

TMP006 Information

www.ti.com

2 TMP006 Information

The TMP006 is a contactless temperature sensor that uses an infrared thermopile sensor to detect the

temperature of a target object. The TMP006 data sheet contains all relevant electrical information (both

analog and digital) pertaining to the device. The TMP006 User’s Guide answers many common questions

related to the operation of the TMP006, including critical application criteria, printed circuit board (PCB)

layout guidelines, and the equations used to calculate target object temperature.

2.1 TMP006EVM

This BoosterPack is intended to demonstrate how an MSP430 and TMP006 can integrate into one

system. To simplify this integration, the TMP006EVM is included as part of this BoosterPack kit. The

TMP006EVM hardware is well documented in the TMP006EVM User Guide; however, note that this

BoosterPack contains different software.

3 Getting Started

3.1 Requirements

TMP006 BoosterPack requires LaunchPad rev1.4 and above. See www.ti.com/launchpadwiki for more

information. TMP006 BoosterPack also requires a MSP430G2553 device, which is included. This device is

pre-programmed with the user experience firmware (see Section 5).

3.2 Configuring LaunchPad

1. LaunchPad rev1.4 and below requires cross jumpering the UART lines. See MSP-EXP430G2

LaunchPad Experimenter Board User's Guide (SLAU318) for more information.

2. For LaunchPad rev1.5, switch to hardware UART through J3 jumpers (see Figure 2).

Figure 2. J3 Jumper

3. Remove P1.6 jumper for I2C operation (see Figure 3).

Figure 3. P1.6 Jumper

4. Do not touch the TMP006 sensor.

5. Replace the existing LaunchPad device with the MSP430G2553 device inside the TMP006

BoosterPack. This device has been pre-loaded with the user experience firmware.

6. Insert BoosterPack on top of the LaunchPad.

4430BOOST-TMP006 BoosterPack SLAU440–June 2012

Submit Documentation Feedback

www.ti.com

Obtaining Software Packages

3.3 Connecting Hardware

Install the LaunchPad drivers included in the firmware package, if needed (see Section 4 for details on

downloading the latest software).

Connect LaunchPad using a USB cable to a PC that is running Windows (see Figure 4). If prompted,

allow Windows to install the software automatically.

Figure 4. Connect USB

4 Obtaining Software Packages

Download the latest software packages from www.ti.com/tmp006boosterpack.

Download the two software packages. One package contains the source code and binaries for

MSP430G2553 firmware. The other is the GUI application created in LabView for interacting with the

BoosterPack.

4.1 Re-Downloading or Modifying Firmware

This step is optional to get started if you have used the pre-loaded MSP430G2553 device inside the

TMP006 BoosterPack. This step can be used to reload the firmware with a newer version or to a blank

device. The quickest way to re-download firmware image is to run MSP430Flasher.bat inside the

bin/firmware folder.

To modify the firmware, see Section 5 regarding supported compilers.

4.2 Installing BoosterPack GUI

Extract the software zip software package with the filename 430boost_tmp006_gui_x_xx_xx_xx.zip.

Execute the setup.exe inside gui_installer folder and follow the installation instructions.

4.3 Starting The Demo Application

1. Determine LaunchPad COM port through the Windows Device Manager.

2. Launch TMP006 BoosterPack GUI software.

3. Select COM Port and OK (see Figure 5).

SLAU440–June 2012 430BOOST-TMP006 BoosterPack

User Experience Application

www.ti.com

Figure 5. Select COM port and Click OK

5 User Experience Application

This software package includes the project files to allow customers re-compile the code for user

development. You could download free and unrestricted compilers and debuggers, including:

• Code Composer Studio™ version 5.2 (CCS)

• IAR Embedded Workbench™ v5.40.3

These project files are located inside 430boost_tmp006_x_xx_xx_xx.zip src folder with their respective

compiler names as the folder.

This application uses hardware UART using the MSP430G2553 USCI module to communicate to the PC

via the LaunchPad’s backchannel UART. The software is capable of using timer-based UART, but the

user would need to change the HARDWARE_UART definition inside the uart.h file, re-compile, and re-

download the firmware.

There are two main user application modes in this user experience code. It operates together with the GUI

application.

• Data Sampling Mode

• Data Logging Mode

5.1 Data Sampling Mode

This mode samples the object temperature and streams the data back to the PC via the MSP430

LaunchPad backchannel UART. The PC then displays the data on the GUI. The Object Temperature is

the calculated temperature of the object. The Local Temperature is the temperature with transient

correction filter applied.

When this mode is operating, the LED1 (RED) on the LaunchPad is on.

The BoosterPack has green (D1) and red (D2) LEDs onboard. These LEDs light up depending on how

cold or hot since it was last calibrated. The colder the temperature is from the calibrated value, the

brighter the green LED would be. The hotter the temperature is from the calibrated value, the brighter the

red led would be. To calibrate a new value, press the S1 button on the Launchpad.

6430BOOST-TMP006 BoosterPack SLAU440–June 2012

Submit Documentation Feedback

Change the conversion rate

on how often to sample the

target temperature

Clear the data logger

memory from Flash

Raw data output

from MSP430

Triggers a data dump from

LaunchPad's memory buffer to the PC.

Available only in Data Logging Mode.

Toggle between

Data Stream and

Data Logger Modes

www.ti.com

User Experience Application

Figure 6. BoosterPack GUI in Data Streaming Mode

Figure 7 shows the graph plot of the data that were streamed back to the PC over time. To save the data

into a CSV file (for example, for data analysis), click Tools > Save Streamed Temperature Data.

SLAU440–June 2012 430BOOST-TMP006 BoosterPack

User Experience Application

www.ti.com

Figure 7. Temperature Values Plotted on Graphs

5.2 Data Logging Mode

In this mode, temperature can be sampled without connection to a PC. An external power source like a

battery pack, not included, must be used. To start data logging mode, press the S2 button. This button is

required if the BoosterPack is used in an untethered mode from the PC. Ensure that LED1 is no longer

ON, which indicates that the firmware is no longer in Data Logging Mode.

To operate the following user configurations, the BoosterPack must be connected to a PC. Select the data

logging mode in the GUI or press the S2 button to switch the mode if the BoosterPack is in data sampling

mode. Clear the data logging buffer in flash memory by pressing Erase Flash Data on the GUI. To send

the data to the PC for data analysis, click Dump Flash Data to PC in the GUI. All of the logged

temperature from the flash memory is read. This data can then be used for data analysis; for example,

using an Excel® spreadsheet.

8430BOOST-TMP006 BoosterPack SLAU440–June 2012

Submit Documentation Feedback

www.ti.com

API Guide

Figure 8. BoosterPack GUI in Data Logging Mode

6 API Guide

This source code allows the user to leverage it for their application development when coupled with an

MSP430 device and TMP006. The TMP006 API source code is fully documented in the doc folder. See

the Doxygen output under doc folder for detailed information on all available API functions.

6.1 Summary of API Functions

The following API functions are available for code development:

void tmp006_init (unsigned char drdyPinEn, unsigned int conversionTime)

void tmp006_wakeup (void)

void tmp006_disable (void)

unsigned char tmp006_ready (void)

struct TempReading tmp006_getTemp (void)

long double tmp006_calculateTemp (long double *tDie, long double *vObj)

int tmp006_read (unsigned char writeByte)

void tmp006_write (unsigned char pointer, unsigned int writeByte)

7 References

1. MSP-EXP430G2 LaunchPad Experimenter Board User's Guide (SLAU318)

SLAU440–June 2012 430BOOST-TMP006 BoosterPack

VCC

P1.0 (LED1)

P1.1 (TXD)

P1.2 (RXD)

P1.3 (S2)

P1.4

P1.5

P2.0

P2.1

P2.2 P2.3

P2.4

P2.5

P1.6 (LED2)

P1.7

(S1) RST

TEST

XOUT

XIN

GND

TMP006EVM Input #2 (Optional)

1 2

500

DNI - Optional

P2.2

P2.1

P2.5

P1.5

P1.6

VCC

P1.1

P1.2

P2.0

P1.4

P1.7

TMP006EVM Input #1

Schematics

www.ti.com

8 Schematics

Figure 9. 430BOOST-TMP006 Schematic

10 430BOOST-TMP006 BoosterPack SLAU440–June 2012

Submit Documentation Feedback

Tabla de contenidos

Otros manuales de Microcontrolador de Texas Instruments

Texas Instruments

Texas Instruments CC3235 SimpleLink Series Manual del producto

Texas Instruments

Texas Instruments MSP430F5638 Manual de usuario

Texas Instruments

Texas Instruments CC13 Series Manual de usuario

Texas Instruments

Texas Instruments CC2530 ZigBee Development Kit Manual de usuario

Texas Instruments

Texas Instruments CC2543EM Manual de usuario

Texas Instruments

Texas Instruments Arrow IoT Manual de usuario

Texas Instruments

Texas Instruments MSP430F6725A Manual de usuario

Texas Instruments

Texas Instruments LaunchPad MSP430G2553 Manual de usuario

Texas Instruments

Texas Instruments Concerto F28M36 Series Manual del producto

Texas Instruments

Texas Instruments AM5728 Manual de usuario

Texas Instruments

Texas Instruments SimpleLink Wi-Fi BoosterPack CC3135 Manual de usuario

Texas Instruments

Texas Instruments Delfino TMS320F28377D controlCARD Manual técnico

Texas Instruments

Texas Instruments MSP430F42 series Manual de usuario

Texas Instruments

Texas Instruments TMS570LS0 32 Series Manual de usuario

Texas Instruments

Texas Instruments MSP430F6769 Manual de usuario

Texas Instruments

Texas Instruments Chipcon Products CC1110DK Manual de programación

Texas Instruments

Texas Instruments MSP430F5529 LaunchPad Manual de usuario

Texas Instruments

Texas Instruments ADS1298RECG-FE Manual de usuario

Texas Instruments

Texas Instruments CC2540 Manual de usuario

Texas Instruments

Texas Instruments MSP430F663x Manual de usuario

Texas Instruments

Texas Instruments TMS320C6000 DSP Manual de usuario

Texas Instruments

Texas Instruments DV2031S2 Manual de usuario

Texas Instruments

Texas Instruments TMS570LC43x Manual de usuario

Texas Instruments

Texas Instruments MSP430 series Manual de usuario

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario

Silicon Laboratories

Silicon Laboratories C8051F800 Manual de usuario

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manual de usuario

Mikroe

Mikroe click Proximity 2 Manual de usuario