This controller is used to control and dim single colour LED
strip. It enables the user to access 3 pre-set lighng levels
from the touch of a buon or adjust your lighng with
smooth dimming (5%-100%) via the touch sensive wheel.
Product Descripon
Technical Specicaon
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
Controller
Order Code LR-W
Type RF remote controller
Input Voltage 3.6VDC
Operaon Frequency 2.46GHz
Dimension 56x113x22mm (WxLxH)
Power Baeries 2xAAA
Receiver
Order Code LRR-W
Type RF receiver
Input Voltage 12-24VDC
Current 2x6A
Output 2x(72-144)W
Note Constant voltage
Dimension 45x85x23mm (WxLxH)
Features
RF technology allows for greater exibility when it
comes to controlling simple or complex lighng instal-
laons without the need of addional cabling.
There are some limitaons where installaons have
the receivers enclosed in electrical boxes or hidden
away in a ceiling, reducing the RF signal strength and
therefore the communicaon range.
In order to overcome these RF Signal restricons we
suggest the following when synchronising our RF con-
trollers and receivers:
• Keep the distance within 10 meters from the con-
troller to the receiver
• When expanding your lighng, always try and use
a signal repeater (PR-RGB), where possible
• It is not recommended to use more than 4 receiv-
ers with a single zone controller.
• This controller / receiver does not have a master/
slave funcon, meaning if you connect several
receivers to the same controller, the LED strip will
become unsynchronised when put into a colour
changing programme (play mode), however it will
not aect the performance in the stac mode.
Recommendaon
• 5%-100% smooth dimming capacity
• Touch sensive brightness wheel
• Wireless RF (Radio Frequency) range of 8-15m (de-
pending on signal obstacles within the installaon area)
LR-W and LRR-W
1 zone RF controller and receiver for single colour LED strip
