Terex Genie GS-1930/32 Manual de usuario
Operator's Manual
Serial Number Range
GS
-
1530/32 from GS3010A
-
110000
from GS3011C-10000
from GS3014D-101
AUS
Australia
GS
-
1930/32 from GS3010A
-
110000
from GS3011C-10000
from GS3014D-101
F
GS
-
2
032 from GS3211A-110000
from GS3212C-10000
GS
-
2
632 from GS3211A-110000
from GS3212C-10000
GS
-
3232 from GS3211A-110000
from GS3212C-10000
with
Maintenance
Information
GS
-
2
04
6
from GS4612A-110000
from GS4612C-10000
from GS4616D-101
GS
-
2
64
6
from GS4612A-110000
from GS4612C-10000
from GS4616D-101
GS
-
324
6
from GS4612A
-
110000
from GS4612C-10000
from GS4616D-101
GS
-
4047 from GS4712C-101
from GS4716D-101
Seventh Edition
Eighth Printing
Part No. T107028
Operator's Manual Seventh Edition • Eight Printing
GS-30 • GS-32 • GS-46 • GS-47 Part No. T107028_78
Front Matter
Important
Read, understand and obey these safety rules and
operating instructions before operating this
machine. Only trained and authorized personnel
shall be permitted to operate this machine. This
manual should be considered a permanent part of
your machine and should remain with the machine
at all times. If you have any questions, contact us.
Contact Us:
Internet: www.genielift.com
Contents
1Introduction ...................................................... 1
2Symbol and Hazard Pictorials Definitions........ 3
3General Safety................................................. 5
4Personal Safety ............................................... 8
5Work Area Safety............................................. 9
6Legend........................................................... 17
23 Controls ......................................................... 20
12 Inspections..................................................... 24
13 Operating Instructions.................................... 44
14 Transport and Lifting Instructions .................. 55
15 Maintenance .................................................. 60
16 Specifications................................................. 62
Copyright © 2012 Terex Corporation
Seventh Edition: Eighth Printing, May 2018
Genie is registered trademarks of Terex South Dakota, Inc. in
the U.S.A. and many other countries.“GS” is a trademark of
Terex South Dakota, Inc.
These machines comply with
AS 1418.10
Seventh Edition • Eight Printing Operator's Manual
Introduction
Part No. T107028_78 GS-30 • GS-32 • GS-46 • GS-47 1
Introducti on
Owners, Users and Operators:
Thank you for choosing our machine for your
application. Our number one priority is user safety,
which is best achieved by our joint efforts. We feel
that you make a major contribution to safety if you,
as the equipment users and operators:
1 Comply with employer, job site and
governmental rules.
2 Read, understand and follow the instructions
in this and other manuals supplied with this
machine.
3 Use good safe work practices in a
commonsense way.
4 Only have trained/certified operators,
directed by informed and knowledgeable
supervision, running the machine.
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer’s instructions and safety
rules—safety and operator’s manuals and
machine decals.
You read, understand and obey employer’s
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Operator's Manual Seventh Edition • Eight Printing
Introduction
2 GS-30 • GS-32 • GS-46 • GS-47 Part No. T107028_78
Hazard Classification
Decals on this machine use symbols, color coding,
and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates a property damage
message.
Intended Use
This machine is intended to be used only to lift
personnel, along with their tools, and materials to
an aerial work site.
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
DANGER
WARNING
CAUTION
NOTICE
Seventh Edition • Eight Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Part No. T107028_78 GS-30 • GS-32 • GS-46 • GS-47 3
Symbol and Hazard P ictorials Definiti ons
Read the operator’s
manual
Read the service
manual
Crush hazard Crush hazard Collision hazard
Tip-over hazard Tip-over hazard Tip-over hazard Tip-over hazard Electrocution hazard
Electrocution hazard Explosion hazard Fire hazard Burn hazard Skin injection hazard
Engage safety arm Keep away from
moving parts
Keep clear of
outriggers and tires
Move machine to
level ground
Close chassis tray
Lower the platform. Do not set up where
it cannot be leveled
with outriggers
Maintain required
clearance
Only trained
maintenance
personnel should
access
compartments
Use a piece of
cardboard or paper to
search for leaks
Operator's Manual Seventh Edition • Eight Printing
Symbol and Hazard Pictorials Definitions
4 GS-30 • GS-32 • GS-46 • GS-47 Part No. T107028_78
Batteries used as
counterweights
Chock the wheels Release brakes Grounded AC
3-wire only
Replace damaged
wires and cords
Wheel load Transport diagram Tiedown Lanyard anchorage
points
No smoking
Voltage rating for
power to platform
Pressure rating for
air line to platform
Manual force Wind speed
Maximum capacity
Seventh Edition • Eight Printing Operator's Manual
General Safety
Part No. T107028_78 GS-30 • GS-32 • GS-46 • GS-47 5
General Safety
Operator's Manual Seventh Edition • Eight Printing
General Safety
6 GS-30 • GS-32 • GS-46 • GS-47 Part No. T107028_78
Seventh Edition • Eight Printing Operator's Manual
General Safety
Part No. T107028_78 GS-30 • GS-32 • GS-46 • GS-47 7
DANGER
Explosion / Burn Hazard
Ignition of explosive gases or contact with corrosive
acid will cause death, burns or blindness
1290675 A
Keep all open and sparks away.Wearflames
personal protective including faceequipment,
shield, gloves and long sleeve shirt.
READ MANUALS
Read all man ior to operuals pr ation.
DO NOT OPERATE if you do notequipment
understand the information in the manuals.
Consult your supervisor, the owner or the
manuf .acturer
1290675
1290657
Tip-over hazard.
Failure to replace batteries with
proper weight batteries will result
in death or serious injury.
Batteries are used as
counterweight and are critical to
machine stability. Each battery
must weigh
46 1
lbs/2 kg.
Battery box including batteries
must weigh a minimum of 138 lbs /
62.5 kg.
1290657 A
=
138 lbs /
62.5 kg
DANGER
Operator's Manual Seventh Edition • Eight Printing
Personal Safety
8 GS-30 • GS-32 • GS-46 • GS-47 Part No. T107028_78
Personal Safety
Personal Fall Protection
Personal fall protection equipment (PFPE) is not
required when operating this machine. If PFPE is
required by job site or employer rules, the following
shall apply:
All PFPE must comply with applicable
governmental regulations and must be inspected
and used in accordance with the manufacturer’s
instructions.
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Otros manuales de Sistema de elevación de Terex
Terex
Terex Genie SX -180 Manual de instalación y funcionamiento
Terex
Terex GTH08E-11500 Manual de instalación y funcionamiento
Terex
Terex Genie Z-45/25 DC Manual de instalación y funcionamiento
Terex
Terex Genie Super Series Manual de usuario
Terex
Terex Z-30/20N Manual de usuario
Terex
Terex Genie Z-45 DC Manual de instalación y funcionamiento
Terex
Terex Genie Superlift Advantage Manual de usuario
Terex
Terex Genie GTH1215M-101 Manual de instalación y funcionamiento
Terex
Terex Genie IWP Series Manual de usuario
Terex
Terex MAC 25-4 SL Manual de usuario
Terex
Terex Genie GS-1532 Manual de instalación y funcionamiento
Terex
Terex Genie SHOV5DL15B-1001 Manual de usuario
Terex
Terex SX135D-101 Manual de usuario
Terex
Terex Genie Z452513A-48153 Manual de instalación y funcionamiento
Terex
Terex Genie AWP Series Manual de usuario
Terex
Terex SX135XCH-101 Manual de instalación y funcionamiento
Terex
Terex Genie Z-60/37DC Manual de usuario
Terex
Terex Genie Z-34/22 IC Manual de usuario
Terex
Terex Genie GR-12 Manual de usuario
Terex
Terex HP-32 Manual de usuario
Manuales populares de Sistema de elevación de otras marcas
morse
morse 82H-124 Manual de usuario
Braun
Braun NL955 Series Manual de usuario
haacon
haacon 1889.10 Manual de usuario
Protekt
Protekt AT 252 Manual de usuario
R. Beck Maschinenbau
R. Beck Maschinenbau HS 600 Manual de usuario
Nova Technology International, LLC
Nova Technology International, LLC NAS Series Manual de usuario
Genie
Genie Z-60/34 Manual de usuario
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manual de usuario
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manual de usuario
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manual de programación
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manual de programación
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manual de programación
