Terex Genie Superlift Advantage Manual de usuario

Operator's Manual

Serial Number Range

Superlift®

Advantage

with

Maintenance

Information

Original Instructions

Fourth Edition

First Printing

Part No. 1314199GT

Front Matter

Operator's Manual Fourth Edition • First Printing

Genie Superlift®Advantage Part No. 1314199GT

Manufacturer:

Terex Global GmbH

Bleicheplatz 2

Schaffhausen, 8200

Switzerland

EU Authorized representative:

Genie Industries B.V.

Boekerman 5

4751 XK OUD GASTEL

The Netherlands

UK Authorized representative:

Genie UK Limited

The Maltings

Wharf Road

Grantham

NG31 6BH

Contents

Introduction ........................................................... 1

Symbol and Hazard Pictorials Definitions............. 6

General Safety ...................................................... 7

Work Area Safety................................................ 11

Legend ................................................................ 15

Inspections.......................................................... 17

Operating Instructions......................................... 27

Transport and Lifting Instructions ....................... 30

Load Capacity Charts ......................................... 32

Specifications...................................................... 34

Fourth Edition: First Printing, October 2022

Genie is a registered trademark of Terex South Dakota, Inc. in

the U.S.A. and many other countries.

Complies with EC Directive 2006/42/EC

See EC Declaration of Conformity

Supply of Machinery (Safety) Regulations 2008

Fourth Edition • First Printing Operator's Manual

Introduction

Part No. 1314199GT Genie Superlift®Advantage 1

Introducti on

About this manual

Genie appreciates your choice of our machine for

your application. Our number one priority is user

safety, which is best achieved by our joint efforts.

This book is an operation and daily maintenance

manual for the user or operator of a Genie

machine.

This manual should be considered a permanent

part of your machine and should remain with the

machine at all times. If you have any questions,

contact Genie.

Product Identification

The machine serial number is located on the serial

label.

Serial label Serial number stamped on

chassis

Intended Use and Familiarization

Guide

The intended use of this machine is to lift material.

Before operating the machine, it’s the operator’s

responsibility to read and understand this

familiarization guide.

Each person must be trained to operate a

material lift.

Familiarization with the material lift must be

given to each person who is authorized,

competent and trained.

Only trained and authorized personnel should

be permitted to operate the machine.

The operator is responsible to read,

understand, and obey the manufacturer’s

instructions and safety rules provided in the

Operator’s Manual.

The Operator’s Manual is located in the

manual storage container, on the machine.

For specific product applications, see

Contacting The Manufacturer.

Operator's Manual Fourth Edition • First Printing

Introduction

2 Genie Superlift®Advantage Part No. 1314199GT

Related machine movement:

Lower the leg to down

position.

Inserting the adjustable

fork

Fork pin inserted

Swivel caster lock

Raise and lowering

carriage

Limitations of use:

•The intended use of this machine is to lift

materials to an aerial work site.

•Do not raise the carriage unless the machine is

on a firm level surface.

Stability enhancing means:

•Stabilizer (if equipped)

•Leg

Restricted operating envelope:

•Load handling attachments (See Load Capacity

Charts section.)

Fourth Edition • First Printing Operator's Manual

Introduction

Part No. 1314199GT Genie Superlift®Advantage 3

Bulletin Distribution and

Compliance

Safety of product users is of paramount

importance to Genie. Various bulletins are used by

Genie to communicate important safety and

product information to dealers and machine

owners.

The information contained in the bulletins is tied to

specific machines using the machine model and

serial number.

Distribution of bulletins is based on the most

current owner on record along with their

associated dealer, so it is important to register

your machine and keep your contact information

up to date.

To ensure safety of personnel and the reliable

continued operation of your machine, be sure to

comply with the action indicated in a respective

bulletin.

To view any open bulletins for your machine, visit

us on the web at www.genielift.com.

Contacting the Manufacturer

At times it may be necessary to contact Genie.

When you do, be ready to supply the model

number and serial number of your machine, along

with your name and contact information. At

minimum, Genie should be contacted for:

Accident reporting

Questions regarding product applications and

safety

Standards and regulatory compliance information

Current owner updates, such as changes in

machine ownership or changes in your contact

information. See Transfer of Ownership, below.

Transfer of Machine Ownership

Taking a few minutes to update owner information

will ensure that you receive important safety,

maintenance and operating information that

applies to your machine.

Please register your machine by visiting us on the

web at www.genielift.com or by calling us toll free

at 1-800-536-1800.

Operator's Manual Fourth Edition • First Printing

Introduction

4 Genie Superlift®Advantage Part No. 1314199GT

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety rules—

safety and operator’s manuals and machine

decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may

damage the safety sign material.

Fourth Edition • First Printing Operator's Manual

Introduction

Part No. 1314199GT Genie Superlift®Advantage 5

Decal Legend

Genie product decals use symbols, color coding

and signal words to identify the following:

Safety alert symbol

—used to

alert personnel to potential

personal injury hazards. Obey all

safety messages that follow this

symbol to avoid possible injury or

death.

Red

—used to indicate the

presence of an imminently

hazardous situation which, if not

avoided, will result in death or

serious injury.

Orange—used to indicate the

presence

of a potentially

hazardous situation which, if not

avoided, could result in death or

serious injury

Yellow with safety alert symbol

—

used to indicate the presence of

a potentially hazardous situation

which, if not avoided, may cause

minor or moderate

injury.

Yellow without safety alert

symbol

—used to indicate the

presence of a potentially

hazardous situation which, if not

avoided, may result in property

damage.

Green

—used to indicate

operation or maintenance

information.

Operator's Manual Fourth Edition • First Printing

Symbol and Hazard Pictorials Definitions

6 Genie Superlift®Advantage Part No. 1314199GT

Symbol and Hazard Pic torials Definiti ons

Read the operator’s

manual

Read the service

manual

Crush hazard No smoking Collision hazard

Crush hazard Tip-over hazard Electrocution hazard Collision hazard Bodily injury hazard

Damaged Machine

Hazards

Transport diagram Lifting point Do not operate in

Strong winds

Electrocution hazard

Fall hazard Fall hazard Lifting point Release brakes Do not place ladder

against the machine

Do not use the

machine on moving

vehicle or surface

Fourth Edition • First Printing Operator's Manual

General Safety

Part No. 1314199GT Genie Superlift®Advantage 7

General Safety

Australia models only

Operator's Manual Fourth Edition • First Printing

General Safety

8 Genie Superlift®Advantage Part No. 1314199GT

Flat Forks

Adjustable Forks

Standard Forks

Boom

Tabla de contenidos

Otros manuales de Sistema de elevación de Terex

Terex

Terex Genie Z-45 DC Manual de instalación y funcionamiento

Terex

Terex Genie IWP Series Manual de usuario

Terex

Terex GTH08E-11500 Manual de instalación y funcionamiento

Terex

Terex Genie QS-12R Manual de usuario

Terex

Terex Genie SX-105 XC Manual de instalación y funcionamiento

Terex

Terex Genie AWP Series Manual de usuario

Terex

Terex Genie Superlift Advantage SL-5 Guía de inicio rápido

Terex

Terex Genie S-40XC Manual de instalación y funcionamiento

Terex

Terex Genie GR -12 Manual de usuario

Terex

Terex SX135H-560 Manual de usuario

Terex

Terex Genie Load Lifter Manual de usuario

Terex

Terex Genie GTH4016 SR Manual de usuario

Terex

Terex Robot 5000 Manual de servicio

Terex

Terex Genie SX-135 XC Manual de usuario

Terex

Terex Genie GR Series Manual de usuario

Terex

Terex Genie GS-1432m Manual de usuario

Terex

Terex Genie Z452513A-48153 Manual de instalación y funcionamiento

Terex

Terex Genie S-45 Trax Manual de usuario

Terex

Terex Genie Z-34/22 IC Manual de usuario

Terex

Terex Z-30/20N Manual de usuario

Terex

Terex Genie Lift Tools Expo Installer Z-45/25 Manual de usuario

Terex

Terex GS32MT-101 Manual de usuario

Terex

Terex Genie GS-1530 Manual de usuario

Terex

Terex C5000 Series Manual de usuario

Manuales populares de Sistema de elevación de otras marcas

morse

morse 82H-124 Manual de usuario

Braun

Braun NL955 Series Manual de usuario

haacon

haacon 1889.10 Manual de usuario

Protekt

Protekt AT 252 Manual de usuario

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manual de usuario

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manual de usuario

Genie

Genie Z-60/34 Manual de usuario

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manual de usuario

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manual de usuario

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manual de programación

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manual de programación

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manual de programación

BERG

BERG BeNomic EasyLeaf Manual de usuario

Powermate

Powermate LiftGate LG-3 Manual de usuario

Snorkel

Snorkel TM12 Series Manual de usuario

Terberg

Terberg OMNIDEKA Manual de usuario

Harmar Mobility

Harmar Mobility AL625 Instrucciones de funcionamiento

Rotary

Rotary SPO16 Manual de usuario