Snugseat Snappi User Manual
Document No: 053-03 v11 Page 6 of 43 June 2015
Snugseat Snappi User Manual.doc
1: Who to contact in difficulty
Tendercare Ltd.
PO BOX 3091, Littlehampton, BN16 2WF
Tel: (01903) 726161 Fax: (01903) 734083
Web: www.tendercareltd.com
2: Introduction
The Snugseat postural control seating system is designed to enhance the sitting of
disabled children who have postural instability with minimal skeletal deformities.
The Wheelbase is made of a strong and lightweight aluminium alloy, minimising weight
and providing a very rugged frame. The wheelbase provides a tilt in space facility and has
2 fixed rear wheels and 2 castor wheels at the front for easy steering. The wheelbase
comes in 2 sizes, size 1 and size 2 and can accommodate nursery or junior snug seats
respectively.
The seat unit is available in two sizes, Nursery and Junior. The seat is supplied with an
attractive cover and modular pad inserts to meet the needs of a wide range of users. The
seat has five-point harness, pommel and footrest. The seat can be quickly fitted and
removed from the buggy, which can be folded for transport. The complete system has
passed impact tests and has been designed for use as a vehicle seat when restrained in
accordance with this manual (see section 12).
The following accessories for use with the Snugseat Snappi are available from Tendercare
Ltd. Carrying tray, Shopping basket, Rain-hood, Sun canopy, Snug-toes, Standard
Headrest, Occipital Roll Headrest and Extra Recess Headrest.
These instructions apply to all sizes.
MODEL MAX OCCUPANT
WEIGHT SEAT SIZE
– mm
WIDTH DEPTH HEIGHT
Nursery 40 kg 300 250 550
Junior 40 kg 340 320 610
IMPORTANT:
Maximum weight includes the occupant and all accessories.
