Cloud Wheelbase and Interface Workshop Manual
Document No: 057-02 v1a Page 8 of 32 July 2018
Cloud Wheelbase and Interface Workshop Manual.doc
1: Your Cloud Wheelbase / Interface Workshop Manual
The purpose of this manual is to help you get the best from your wheelbase & interface. It
does this by telling you how to complete those maintenance and repair tasks that can be
carried out by a competent person. The manual also tells you when you should contact the
manufacturer who is:
Tendercare Ltd.
PO BOX 3091, Littlehampton, BN16 2WF
Tel: (01903) 726161 Fax: (01903) 734083
Web: www.tendercareltd.com
IMPORTANT:
This manual must be read and used in conjunction with the user manual.
The Wheelbase is made of a strong and lightweight aluminium alloy. The wheelbase
provides a tilt in space facility and has 2 fixed rear wheels and 2 castor wheels at the front
for easy steering. The wheelbase comes in two sizes with corresponding interfaces to suit
a range of different seats.
The Interface provides a lightweight, easy to operate, quick release system that can be
fitted to a wide range of special seating systems. Please note the interface requires
additional framework to fit to a seat and has been designed to take 19mm (3/4”) aluminium
or mild steel tube.
The interface can be quickly fitted and released from the wheelbase, which can be folded
for transport. The Cloud has been successfully impact tested as a wheelbase and
interface with the Snappi, Snug and Modular seating systems. When fitting third party
seating systems to the Cloud, the manufacturer of the system must carry out a risk
assessment before use.
Interfacing Options:
Important:
Maximum width i.e. the maximum space available for seating systems being
fitted into frame.
*Maximum carry weight is defined as the user weight, weight of the seating
system, plus any accessories / equipment which may be fitted or carried on
the chassis. Warning: Never exceed the maximum stated carry weight.
Frame Weight:
Size 1: 12 kg
Size 2: 13 kg
