Tenda W300A Manual de usuario
300M Wireless-N Access Point
300M Wireless-N Access Point
Copyright Statement
is the registered trademark of
Shenzhen Tenda Technology Co., Ltd. All the products
and product names mentioned herein are the
trademarks or registered trademarks of their
respective holders. Copyright of the whole product as
integration, including its accessories and software,
belongs to Shenzhen Tenda Technology Co., Ltd.
Without the permission of Shenzhen Tenda Technology
Co., Ltd, any individual or party is not allowed to copy,
plagiarize, imitate or translate it into other languages.
All the photos and product specifications mentioned in
this manual are for references only. As the upgrade of
software and hardware, there will be changes. And if
there are changes, Tenda is not responsible for
informing in advance. If you want to know more about
our product information, please visit our website at
www.tenda.cn.
300M Wireless-N Access Point
Content
Content .....................................................3
Chapter 1 Product Overview .........................1
1.1 Features ..........................................2
1.2 Package Contents..............................3
1.3 LED Indicator and Panel Description.....4
Chapter 2 Hardware Installation....................8
Chapter 3 Web Configuration ......................10
3.1 Web Login......................................10
3.2 Wizard...........................................12
3.3 Running Status...............................13
3.4 LAN Settings ..................................14
Chapter 4 Wireless Settings........................16
4.1 Working Mode.................................16
4.1.1 Access Point (AP) Mode ..............17
4.1.2 P2P (Point to Point) Bridge Mode..33
4.1.3 P2MP Bridge Mode.....................38
4.1.4 Wireless Repeater Mode .............43
4.1.5 Wireless Client Mode..................50
300M Wireless-N Access Point
4.2 Advanced Settings ..........................54
4.3 WPS Settings..................................56
4.4 Access Control................................58
4.5 Connection Status...........................60
4.6 PING.............................................61
Chapter 5 SNMP Setting.............................62
5.1 SNMP Introduction ..........................62
5.2 SNMP Setting .................................63
Chapter 6 System Tools .............................65
6.1 Password Change............................65
6.2 Restore to Factory.............................66
6.3 Backup/Restore ..............................67
6.4 Time Settings.................................68
6.5 Reboot System ...............................69
6.6 Firmware Upgrade...........................69
6.7 Syslog...........................................71
Appendix I: Glossary .................................72
Appendix II: TCP/IP Address Setting (Take Winxp
as example) .............................................75
300M Wireless-N Access Point
Chapter 1 Product Overview
W300A is an IEEE802.11n (Draft 2.0)-compliant
wireless access point with one Gigabit LAN switch port,
which utilizes the latest MIMO technology and provides
up to 300Mbps stable transmission rate from wireless
radio to wired network. With backward compatible
with IEEE802.11b/g device, it is suitable for SOHOs
and small-sized enterprises to share the wireless
network.
W300A supports five working modes: wireless AP
mode for other wireless access; Repeater mode for
relaying wireless network coverage; P2P, P2MP mode
for bridging two or more wireless network and wireless
client mode. Besides, it supports multiple encryption
methods like 64/128bit WEP, WPA, WPA2 and
WPA&WPA2 to protect you network against malicious
attack, and WPS can free you from remembering long
passwords. Power over Ethernet support can realize
data transmission and power supply via one Ethernet
cable. Moreover, SNMP and Web-based management
interface can help users configure the device more
easily.
1
300M Wireless-N Access Point
1.1 Features
Complies with IEEE802.11n (Draft 2.0),
IEEE802.11b and IEEE802.11g standards
Supports five working modes: wireless AP,
Repeater, P2P, P2MP and wireless client
Provides 300Mbps receiving rate and 300Mbps
sending rate
MIMO technology utilizes reflection signal to
increase 8 times transmission distance of original
802.11g standard and reduces the "dead spots" in
thewireless coveragearea
Provides one Gigabit Auto-negotiation RJ45 port
for LAN connection
Supports two power supply ways: Power over
Ethernet and external power adapter
Supports SNMP and Web-based management
interface
Supports 64/128bit WEP encryption
Supports multiple encryption methods as WPA,
WPA2 and WPA&WPA2 and security mechanism
Supports WPS (PBC and PIN) encryption method
to free you from remembering long passwords
Supports five connection modes: AP, WDS P2P
2
300M Wireless-N Access Point
Bridge, WDS P2MP Bridge, WDS AP Bridge and
Client
Supports Auto MDI/MDIX
Supports Firefox1.0, IE5.5 or above
Supports authorization access over thirty-two
MAC addresses
Supports auto wireless channel selection
Provides three detachable antennas
Wireless local network usually is used in a planned
environment where each access point is located
steadily and with stable radio coverage area. The AP
(Access Point) will provide wireless communication
service for users around.
1.2 Package Contents
Please unpack the package and find the following
items:
One W300A Wireless AP
One Power Adapter
One Quick Installation Guide
One CD-ROM
3
300M Wireless-N Access Point
If any of listed items are missing or damaged, please
contact the Tenda reseller from whom you purchased
for replacement immediately.
1.3 LED Indicator and Panel Description
LED indicator description on front panel
(from L to R)
WPS
When blinking, it indicates the device is
negotiating with client in WPS mode.
POWER
When turns green, Always ON indicates the power
connects well.
4
300M Wireless-N Access Point
SYS
When turns green, blinking indicates the system
runs well.
WLAN
Wireless signal LED indicator. When turns green,
Always ON indicates the wireless function is
enabled; blinking indicates the device is
transmitting and/or receiving data.
LAN
Wired local network LED indicator. Always ON
indicates it is connected with Ethernet device;
green indicates the link speed is 1000Mbps;
orange indicates the link speed is 10/100Mbps;
blinking indicates the device is transmitting
and/or receiving data.
5
300M Wireless-N Access Point
Rear Panel：（From L to R）
POWER
The jack is for power adapter connection. Please
use the included 12V DC power adapter.
LAN
The Gigabit Ethernet port is for computer’s NIC
or switch connection. It also can be used as PoE
interface. When PoE and external power
adapter power on the device, the include power
adapter is preferred.
RESET/WPS
Compound button is for system reset and WPS.
When you press this button for 7 seconds, the
device will restore the configured settings to
6
Otros manuales para W300A
1
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de Tenda
Tenda
Tenda W150M Manual
Tenda
Tenda PW201A Manual de usuario
Tenda
Tenda W54A Manual de usuario
Tenda
Tenda W300A Manual de usuario
Tenda
Tenda i27 Manual de usuario
Tenda
Tenda AX3000 Manual de usuario
Tenda
Tenda WH450A Manual de usuario
Tenda
Tenda TWL5401A Manual de usuario
Tenda
Tenda W301A Manual de usuario
Tenda
Tenda W302A Manual de usuario
Tenda
Tenda W54A Manual de usuario
Tenda
Tenda 11AC Manual de usuario
Tenda
Tenda teg2124t Manual de usuario
Tenda
Tenda i12 Manual de usuario
Tenda
Tenda AP4 Manual de usuario
Tenda
Tenda I-WL-O3 Manual de usuario
Tenda
Tenda i21 Manual de usuario
Tenda
Tenda N300 Manual de usuario
Tenda
Tenda i9 Manual de usuario
Tenda
Tenda AP5V Manual de usuario
