Tenda i12 Manual de usuario
Q1.
i12 Wireless Access Point
User Guide
Copyright Statement
© 2017 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and
product names mentioned herein are trademarks or registered trademarks of their respective holders. Copyright
of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda
Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form or by any means without the prior written permission of
Shenzhen Tenda Technology Co., Ltd.
Disclaimer
Pictures, images and product specifications herein are for references only. To improve internal design,
operational function, and/or reliability, Tenda reserves the right to make changes to the products without
obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability
that may occur due to the use or application of the product described herein. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Preface
Thank you for choosing Tenda! Please read this user guide before you start with i12.
Conventions
The typographical elements that may be found in this document are defined as follows.
Item
Presentation
Example
Cascading menus
>
System > Live Users
Parameter and value
Bold
Set User Name to Tom.
Variable
Italic
Format: XX:XX:XX:XX:XX:XX
UI control
Bold
On the Policy page, click the OK button.
Message
“ ”
The “Success” message appears.
The symbols that may be found in this document are defined as follows.
Symbol
Meaning
This format is used to highlight information of importance or special interest. Ignoring this
type of note may result in ineffective configurations, loss of data or damage to device.
This format is used to highlight a procedure that will save time or resources.
Acronyms and Abbreviations
Acronym or Abbreviation
Full Spelling
AP
Access Point
DDNS
Dynamic Domain Name System
DHCP
Dynamic Host Configuration Protocol
DLNA
Digital Living Network Alliance
DMZ
Demilitarized Zone
DNS
Domain Name System
IPTV
Internet Protocol Television
ISP
Internet Service Provider
L2TP
Layer 2 Tunneling Protocol
Acronym or Abbreviation
Full Spelling
MPPE
Microsoft Point-to-Point Encryption
PPP
Point To Point Protocol
PPPoE
Point-to-Point Protocol over Ethernet
PPTP
Point to Point Tunneling Protocol
SSID
Service Set Identifier
STB
Set Top Box
URL
Uniform Resource Locator
VLAN
Virtual Local Area Network
VPN
Virtual Private Network
WISP
Wireless Internet Service Provider
WPS
WiFi Protected Setup
Additional Information
For more information, search this product model on our website at http://www.tendacn.com.
Technical Support
If you need more help, contact us by any of the following means. We will be glad to assist you as soon as
possible.
Hotline
Global: (86) 755-27657180
Email
support@tenda.cn
United States: 1-800-570-5892
Canada: 1-888-998-8966
Hong Kong: 00852-81931998
Australia: 1300787922
New Zealand: 800787922
Website
http://www.tendacn.com
Skype
tendasz
Contents
1 Get to Know Your Device ................................................................................................................................... 7
1.1 Overview...................................................................................................................................................... 7
1.2 Packing List................................................................................................................................................... 7
1.3 Appearance.................................................................................................................................................. 8
1.3.1 LED Indicator..................................................................................................................................... 8
1.3.2 Button and Port................................................................................................................................. 8
1.3.3 Label.................................................................................................................................................. 9
2 Installing the AP ............................................................................................................................................... 11
2.1 Preparing for Installation ........................................................................................................................... 11
2.1.1 Precautions ..................................................................................................................................... 11
2.1.2 Preparing Tools ............................................................................................................................... 11
2.2 Installing the AP ......................................................................................................................................... 11
2.3 Connecting the Power Supply.................................................................................................................... 15
2.4 Connecting the AP ..................................................................................................................................... 16
3 Managing the AP.............................................................................................................................................. 18
3.1 Management Modes ................................................................................................................................. 18
3.2 Logging In to the Web UI of the AP............................................................................................................ 18
3.3 Logging Out of the Web UI of the AP......................................................................................................... 20
3.4 Common Buttons on the Web UI............................................................................................................... 21
4 Functions ......................................................................................................................................................... 22
4.1 Status ......................................................................................................................................................... 22
4.1.1 System Status.................................................................................................................................. 22
4.1.2 Wireless Status................................................................................................................................ 22
4.1.3 Traffic Statistics ............................................................................................................................... 23
4.1.4 Client List......................................................................................................................................... 24
4.2 Quick Setup................................................................................................................................................ 25
4.2.1 AP Mode ......................................................................................................................................... 26
4.2.2 WDS Mode...................................................................................................................................... 26
4.2.3 AP+Client Mode .............................................................................................................................. 33
4.3 Network Settings ....................................................................................................................................... 35
4.3.1 LAN Setup ....................................................................................................................................... 35
4.3.2 DHCP Server.................................................................................................................................... 38
4.4 Wireless Settings........................................................................................................................................ 40
4.4.1 Basic Settings .................................................................................................................................. 40
4.4.2 Radio Settings ................................................................................................................................. 49
4.4.3 Channel Scan................................................................................................................................... 50
4.4.4 Advanced Settings........................................................................................................................... 52
4.4.5 Access Control................................................................................................................................. 54
4.4.6 QVLAN Settings ............................................................................................................................... 56
4.5 SNMP ......................................................................................................................................................... 60
4.6 Tools........................................................................................................................................................... 61
4.6.1 Firmware Upgrade .......................................................................................................................... 61
4.6.2 Date & Time .................................................................................................................................... 62
4.6.3 Logs................................................................................................................................................. 65
4.6.4 Configuration Management............................................................................................................ 68
4.6.5 Accounts ......................................................................................................................................... 71
4.6.6 Diagnostics...................................................................................................................................... 73
4.6.7 Reboot............................................................................................................................................. 73
4.6.8 LED Control ..................................................................................................................................... 76
Appendixes .............................................................................................................................................................. 77
1 Get to Know Your Device
1.1 Overview
i12 is a Tenda ceiling-mounted wireless access point (AP) that offers a wireless transmission capacity of up to 300
Mbps. It supports DC and PoE power supplies, and can be managed using the web UI of the AP or a Tenda AP
controller (AC) such as M3. The AP is an optimum choice for providing wireless coverage in indoor areas such as
enterprises, hotels, and restaurants.
The following table provides the specifications of i12.
Model
Product Name
Power Supply
DC
PoE
i12
Wireless access point (25
clients)
12V 1A
IEEE 802.3at PoE
1.2 Packing List
Ceiling-mounted AP
Mounting bracket
Ethernet cable
Installation guide
Screw x 4
Sleeve anchor x 4
1.3 Appearance
1.3.1 LED Indicator
LED Indicator
Status
Description
System indicator
Solid on
The system is booting or faulty.
Blinking
The system is running properly.
Off
The system is powered off or the LED indicator is turned off.
1.3.2 Button and Port
Reset button
After the AP is powered on, you can hold down this button for 8 seconds to restore the factory
settings.
RJ45 port
This port is used to connect to a PoE power supply and exchange data.
Model
Rate
Connection Description
i12
10/100/1000 Mbps auto
negotiation
If the AP is powered using a DC adapter,
connect this port to a switch. If the AP must be
powered through PoE, connect this port to an
RJ45 port
System indicator
Power jack
Reset button
Model
Rate
Connection Description
IEEE 802.3at PoE switch.
The AP allows a PoE power supply distance of
not longer than 100 meters.
Power jack
The power jack is used to connect to a DC adapter for supplying power to the AP.
Model
Power Specifications
Input
Output
i12
100V-240V, 50/60Hz AC
12V 1A DC
1.3.3 Label
The label is located on the rear panel of the AP. For details of the label, see the following figure.
(1): Name of the AP.
(2): Model of the AP.
Position of the label
(1)
(3)
(4)
(5)
(6)
(2)
(3): Default IP address of the AP. You can use this IP address to log in to the web UI of the AP.
(4): Default user name and password of the web UI of the AP.
(5): MAC address of the AP. The default primary SSID of the AP is Tenda_XXXXXX, where XXXXXX
indicates the last 6 characters of this MAC address.
(6): Serial number of the AP. If the AP is faulty, you need to provide this serial number when sending
the AP for repair.
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de Tenda
Tenda
Tenda AX3000 Manual de usuario
Tenda
Tenda AP5V Manual de usuario
Tenda
Tenda N300 Manual de usuario
Tenda
Tenda O6 Manual de usuario
Tenda
Tenda teg2124t Manual de usuario
Tenda
Tenda W302A Manual de usuario
Tenda
Tenda AP4 Manual de usuario
Tenda
Tenda W300A Manual de usuario
Tenda
Tenda W150M Manual
Tenda
Tenda i9 Manual de usuario
Tenda
Tenda PW201A Manual de usuario
Tenda
Tenda W54A Manual de usuario
Tenda
Tenda W300A Manual de usuario
Tenda
Tenda W54A Manual de usuario
Tenda
Tenda W301A Manual de usuario
Tenda
Tenda teg2124t Manual de usuario
Tenda
Tenda WH450A Manual de usuario
Tenda
Tenda i21 Manual de usuario
Tenda
Tenda W301A Manual de usuario
Tenda
Tenda 11AC Manual de usuario
