- 1 -
Cod.954527
(EN).........................pag. 1
(IT) ..........................pag. 3
(FR).........................pag. 5
(ES) .........................pag. 7
(DE).........................pag. 9
(RU) .....................pag. 11
(PT)...................... pag. 13
(EL) ......................pag. 15
(NL)...................... pag. 17
(HU).....................pag. 19
(RO) ..................... pag. 21
(SV)......................pag. 23
(DA) ..................... pag. 25
(NO)..................... pag. 27
(FI)........................ pag. 29
(CS)...................... pag. 31
(SK)...................... pag. 33
(SL) ......................pag. 35
(HR-SR) ..............pag. 37
(LT ) ....................... pag. 39
(ET) ...................... pag. 41
(LV) ...................... pag. 43
(BG) .....................pag. 45
(PL) ......................pag. 47
(AR)......................pag. 49
(EN)
WELDING MASK MANUAL
TELWIN S.p.A.
Via della Tecnica, 3 - 36030 VILLAVERLA (Vicenza) Italy
Informative note on welding mask Model TWFR.
Note: the term mask is used in the text that follows.
The mask Model TWFR is in compliance with the requirements of the EN 175 European Standard (Personal protection. Equipment for eye and
face protection during welding and allied processes) and with what is prescribed by the 89/686/EEC reference Directive.
ATTENTION!
Mask users must read, learn and respect the basic rules given in this manual.
The radiation emitted by the electric arc during welding can damage the eyes and burn the skin. In addition, welding produces sparks and drops
o molten metal tat y in all directions.
The protective mask must be worn to avoid potentially serious physical damages.
o not, or any reason, set re to te weldin mask ecause te smoke it produces will damae te eyes and ody i inaled.
The material used to make the whole mask does not endanger people or the environment.
Regularly check the conditions of the mask:
eore usin it, make sure tat te lterlass is in te correct position and correctly ed in place it must e eactly in te space descried.
eep te mask away rom ames.
- The mask must not be placed too close to the welding area.
- When welding for extended periods, occasionally check the mask to make sure there are no signs of deformation or deterioration.
- Subjects with particularly sensitive skin must take extra care: materials that may come into contact with the skin can cause allergic reactions.
- Do not use replacement parts other than those original TELWIN.
nautorized modications and replacement parts will oid te warranty and epose te operator to te risk o personal injury.
INSTRUCTIONS FOR USE AND MAINTENANCE
The mask must always be used to protect only the face and eyes during welding. It was, in fact, designed to guarantee maximum protection
during welding, to be easy to assemble, comfortable to wear and of top quality when used.
After using the mask and before putting it away after working, it must be checked to verify integrity and to eliminate any drops of molten metal
tat may e present on te ision lter, wic can reduce isiility.
e mask must e stored in a way tat does not allow its dimensions to deorm permanently or its protectie ision lter to reak.
CLEANING AND DISINFECTION
Clean and disinfect the mask using only water and soap, or if necessary products that do not contain solvents. Using chemical solvents ruins the
mask, and can totally reduce its integrity.
Taking good care of the mask reduces its obsolescence to a minimum, both as regards use and components.
FILTER SPECIFICATIONS
e mask is supplied wit a lterlass marked ain a dark sade o . se te masks wit lter or weldin and cuttin processes only
using current intervals indicated in tab. 1 according to level number 11.
he lter is in compliance with the Personal eye protection - Specications and the Personal eye-
protection ilters or welding and related techniues ransmittance reuirements and recommended use Standards
o use it correctly, operators who purchase this mask must:
ake sure tat te lter suraces do not sow sins o scorin, cuts, knocks or any oter tin tat could ostacle correct ision.
o presere it correctly, te lter sould e kept in an enironment tat does not contain oranic apours and at a temperature o etween
and .
o carry out maintenance correctly, the user must:
eularly clean te lter ater it is used, rinsin it immediately wit te cleanin liuid.
s regards cleaning, the user must follow these instructions:
- never clean the mask in direct sunlight;
use asorent clots or sot nonscratc tetiles to dry te lter
use warm water and neutral soap or, alternatiely, any conentional lter cleaner as a cleanin liuid
- never use abrasive or very alkaline cleaners;
- I S GIC SS IIS SC S P C
Using a higher dark shade does not guarantee greater protection, but could force the operator to remain too close to the radiation source and
breathe in harmful smoke.
usin te lter causes a eelin o discomort, te workin conditions and te operators eyesit must e cecked.
Wen workin in te open air under stron natural lit, it is possile to use a protection lter wit te netup dark sade numer.
e lter, wic is made o ardened adiactinic lass, can reak i allowed to all rom eits o less tan one meter and ollowin accidental
knocks aainst corners or edes, wic can appen i users rotate teir eads suddenly. e lter must e used in comination wit suitale
coverings and inner and outer protection shields of the same dimensions. We recommend using inner and outer protection shields made of
plastic, anti-knock material, preferably polycarbonate.
Wen replacin te lter, te coerins and te inner and outer protection sields reer to te instructions supplied y te manuacturer o te
welding face guard or the associated hand welding screens. The operator who carries out replacement operations must have clean hands or
wear non-abrasive gloves.
o aoid damaes durin transport or storae, we recommend keepin te lter in its oriinal packain.
te preiously indicated cleanin instructions are scrupulously ollowed, te lter will not deteriorate ecessiely under normal use conditions.
